[PATCH 22/61] ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Jun 24 09:49:18 EDT 2010
Addionally remove an unneeded include.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-imx/devices.c | 17 ++++++++---------
arch/arm/mach-imx/devices.h | 14 ++++++++------
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 4 ++--
arch/arm/mach-imx/mach-cpuimx27.c | 4 ++--
arch/arm/mach-imx/mach-imx27lite.c | 2 +-
arch/arm/mach-imx/mach-mx21ads.c | 6 +++---
arch/arm/mach-imx/mach-mx27_3ds.c | 2 +-
arch/arm/mach-imx/mach-mx27ads.c | 12 ++++++------
arch/arm/mach-imx/mach-mxt_td60.c | 6 +++---
arch/arm/mach-imx/mach-pca100.c | 2 +-
arch/arm/mach-imx/mach-pcm038.c | 6 +++---
11 files changed, 38 insertions(+), 37 deletions(-)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 08ae763..b372805 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -38,7 +38,6 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/mmc.h>
-#include <mach/imx-uart.h>
#include "devices.h"
@@ -426,7 +425,7 @@ struct platform_device mxc_usbh2 = {
DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-#define DEFINE_IMX_UART_DEVICE(n, baseaddr, irq) \
+#define DEFINE_IMX2x_UART_DEVICE(n, baseaddr, irq) \
static struct resource imx2x_uart_resources ## n[] = { \
{ \
.start = baseaddr, \
@@ -439,21 +438,21 @@ DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
}, \
}; \
\
- struct platform_device mxc_uart_device ## n = { \
+ struct platform_device imx2x_uart_device ## n = { \
.name = "imx-uart", \
.id = n, \
.num_resources = ARRAY_SIZE(imx2x_uart_resources ## n), \
.resource = imx2x_uart_resources ## n, \
}
-DEFINE_IMX_UART_DEVICE(0, MX2x_UART1_BASE_ADDR, MX2x_INT_UART1);
-DEFINE_IMX_UART_DEVICE(1, MX2x_UART2_BASE_ADDR, MX2x_INT_UART2);
-DEFINE_IMX_UART_DEVICE(2, MX2x_UART3_BASE_ADDR, MX2x_INT_UART3);
-DEFINE_IMX_UART_DEVICE(3, MX2x_UART4_BASE_ADDR, MX2x_INT_UART4);
+DEFINE_IMX2x_UART_DEVICE(0, MX2x_UART1_BASE_ADDR, MX2x_INT_UART1);
+DEFINE_IMX2x_UART_DEVICE(1, MX2x_UART2_BASE_ADDR, MX2x_INT_UART2);
+DEFINE_IMX2x_UART_DEVICE(2, MX2x_UART3_BASE_ADDR, MX2x_INT_UART3);
+DEFINE_IMX2x_UART_DEVICE(3, MX2x_UART4_BASE_ADDR, MX2x_INT_UART4);
#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_UART_DEVICE(4, MX27_UART5_BASE_ADDR, MX27_INT_UART5);
-DEFINE_IMX_UART_DEVICE(5, MX27_UART6_BASE_ADDR, MX27_INT_UART6);
+DEFINE_IMX2x_UART_DEVICE(4, MX27_UART5_BASE_ADDR, MX27_INT_UART5);
+DEFINE_IMX2x_UART_DEVICE(5, MX27_UART6_BASE_ADDR, MX27_INT_UART6);
#endif
/* GPIO port description */
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
index 84ed513..65c4a43 100644
--- a/arch/arm/mach-imx/devices.h
+++ b/arch/arm/mach-imx/devices.h
@@ -6,12 +6,14 @@ extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
#endif
extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
+extern struct platform_device imx2x_uart_device0;
+extern struct platform_device imx2x_uart_device1;
+extern struct platform_device imx2x_uart_device2;
+extern struct platform_device imx2x_uart_device3;
+#ifdef CONFIG_MACH_MX27
+extern struct platform_device imx2x_uart_device4;
+extern struct platform_device imx2x_uart_device5;
+#endif
extern struct platform_device mxc_w1_master_device;
#ifdef CONFIG_MACH_MX21
extern struct platform_device imx21_nand_device;
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index f3b169d..463e80d 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -222,8 +222,8 @@ void __init eukrea_mbimx27_baseboard_init(void)
mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
- mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+ mxc_register_device(&imx2x_uart_device1, &uart_pdata[0]);
+ mxc_register_device(&imx2x_uart_device2, &uart_pdata[1]);
mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
mxc_register_device(&mxc_sdhc_device0, NULL);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 1f616dc..866a99a 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -187,7 +187,7 @@ static void __init eukrea_cpuimx27_init(void)
mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata[0]);
mxc_register_device(&imx27_nand_device,
&eukrea_cpuimx27_nand_board_info);
@@ -203,7 +203,7 @@ static void __init eukrea_cpuimx27_init(void)
/* SDHC2 can be used for Wifi */
mxc_register_device(&mxc_sdhc_device1, NULL);
/* in which case UART4 is also used for Bluetooth */
- mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+ mxc_register_device(&imx2x_uart_device3, &uart_pdata[1]);
#endif
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index fd1dddb..27da9a1 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -70,7 +70,7 @@ static void __init mx27lite_init(void)
{
mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
"imx27lite");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 99f2492..e51f6f8 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -297,9 +297,9 @@ static void __init mx21ads_board_init(void)
mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
"mx21ads");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
- mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
- mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata);
+ mxc_register_device(&imx2x_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&imx2x_uart_device3, &uart_pdata);
mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index a45df59..c9af5f1 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -75,7 +75,7 @@ static void __init mx27pdk_init(void)
{
mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
"mx27pdk");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 2183e3d..771a63f 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -313,12 +313,12 @@ static void __init mx27ads_board_init(void)
mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
"mx27ads");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
- mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
- mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
- mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&imx2x_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&imx2x_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&imx2x_uart_device3, &uart_pdata[3]);
+ mxc_register_device(&imx2x_uart_device4, &uart_pdata[4]);
+ mxc_register_device(&imx2x_uart_device5, &uart_pdata[5]);
mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index bc38559..4f4200b 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -254,9 +254,9 @@ static void __init mxt_td60_board_init(void)
mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
"MXT_TD60");
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&imx2x_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&imx2x_uart_device2, &uart_pdata[2]);
mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index a87422e..984c4ca 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -320,7 +320,7 @@ static void __init pca100_init(void)
mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata);
mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 36c8943..b6a15ba 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -305,9 +305,9 @@ static void __init pcm038_init(void)
pcm038_init_sram();
- mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
- mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
- mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+ mxc_register_device(&imx2x_uart_device0, &uart_pdata[0]);
+ mxc_register_device(&imx2x_uart_device1, &uart_pdata[1]);
+ mxc_register_device(&imx2x_uart_device2, &uart_pdata[2]);
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
--
1.7.1
More information about the linux-arm-kernel
mailing list