[PATCH 11/12] mmci: support different FIFO sizes
Rabin Vincent
rabin.vincent at stericsson.com
Tue Jun 22 05:17:46 EDT 2010
The Ux500 variant has a 32-word FIFO (TXFIFOEMPTY is asserted when it
has 2 left) and TXFIFOHALFEMPTY is repurposed as TXFIFOBURSTWRITEABLE,
with a burst being defined as 8-words. Likewise for RX.
Acked-by: Linus Walleij <linus.walleij at stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent at stericsson.com>
---
drivers/mmc/host/mmci.c | 22 +++++++++++++++++++---
drivers/mmc/host/mmci.h | 7 -------
2 files changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 6c8e41b..4eb7265 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -41,23 +41,35 @@ static unsigned int fmax = 515633;
* @clkreg: default value for MCICLOCK register
* @clkreg_enable: enable value for MMCICLOCK register
* @datalength_bits: number of bits in the MMCIDATALENGTH register
+ * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
+ * is asserted (likewise for RX)
+ * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
+ * is asserted (likewise for RX)
*/
struct variant_data {
unsigned int clkreg;
unsigned int clkreg_enable;
unsigned int datalength_bits;
+ unsigned int fifosize;
+ unsigned int fifohalfsize;
};
static struct variant_data variant_arm = {
+ .fifosize = 16 * 4,
+ .fifohalfsize = 8 * 4,
.datalength_bits = 16,
};
static struct variant_data variant_u300 = {
+ .fifosize = 16 * 4,
+ .fifohalfsize = 8 * 4,
.clkreg_enable = 1 << 13, /* HWFCEN */
.datalength_bits = 16,
};
static struct variant_data variant_ux500 = {
+ .fifosize = 30 * 4,
+ .fifohalfsize = 8 * 4,
.clkreg = MCI_CLK_ENABLE,
.clkreg_enable = 1 << 14, /* HWFCEN */
.datalength_bits = 24,
@@ -138,6 +150,7 @@ static void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
+ struct variant_data *variant = host->variant;
unsigned int datactrl, timeout, irqmask;
unsigned long long clks;
void __iomem *base;
@@ -173,7 +186,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
* If we have less than a FIFOSIZE of bytes to transfer,
* trigger a PIO interrupt as soon as any data is available.
*/
- if (host->size < MCI_FIFOSIZE)
+ if (host->size < variant->fifosize)
irqmask |= MCI_RXDATAAVLBLMASK;
} else {
/*
@@ -316,13 +329,15 @@ static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int rema
static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
{
+ struct variant_data *variant = host->variant;
void __iomem *base = host->base;
char *ptr = buffer;
do {
unsigned int count, maxcnt;
- maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;
+ maxcnt = status & MCI_TXFIFOEMPTY ?
+ variant->fifosize : variant->fifohalfsize;
count = min(remain, maxcnt);
writesl(base + MMCIFIFO, ptr, count >> 2);
@@ -346,6 +361,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
{
struct mmci_host *host = dev_id;
struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ struct variant_data *variant = host->variant;
void __iomem *base = host->base;
unsigned long flags;
u32 status;
@@ -401,7 +417,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
* If we're nearing the end of the read, switch to
* "any data available" mode.
*/
- if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)
+ if (status & MCI_RXACTIVE && host->size < variant->fifosize)
writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
/*
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 0a11ddc..c7d373c 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -133,13 +133,6 @@
MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK)
-/*
- * The size of the FIFO in bytes.
- */
-#define MCI_FIFOSIZE (16*4)
-
-#define MCI_FIFOHALFSIZE (MCI_FIFOSIZE / 2)
-
#define NR_SG 16
struct clk;
--
1.7.0
More information about the linux-arm-kernel
mailing list