[PATCH v4] libata: pata_samsung_cf: Add Samsung PATA controller driver
Kukjin Kim
kgene.kim at samsung.com
Mon Jun 21 21:45:23 EDT 2010
Kukjin Kim wrote:
>
> From: Abhilash Kesavan <a.kesavan at samsung.com>
>
> Adds support for the Samsung PATA controller. This driver is based on the
> Libata subsystem and references the earlier patches sent for IDE
subsystem.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
Hi,
Maybe missed? :-(
If no problems, please apply or kindly let me know how this should be
handled.
>
> Changes since v3:
>
> Addressed comments from
>
> Sergei Shtylyov:
> - Removed filename in header
> - Used ata_timing_compute for obtaining timing parameters
> - Removed valid PIO mode check
> - Added softreset method and associated functions
> - Used devm_request_mem_region function as had used devm_ioremap
> earlier
> - Removed kree and release_mem_region calls because of managed
> kzalloc and request_mem_region fns being used
> - Added return in clk_get function
> - Added missing clk_put
> - Corrected indentation issue
>
> Ben Dooks:
> - Added missing 'void __iomem' parameters
> - Added check for trailing bytes in data_xfer function
> - Removed assignment in data_xfer function
> - Coding changes - e.g. in pata_s3c_enable, pata_s3c_dev_select,
> wait_for_host_ready
> - Removed host checks in suspend/resume functions
>
> drivers/ata/Kconfig | 9 +
> drivers/ata/Makefile | 1 +
> drivers/ata/pata_samsung_cf.c | 735
> +++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 745 insertions(+), 0 deletions(-)
> create mode 100644 drivers/ata/pata_samsung_cf.c
>
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list