[PATCH 25/25] pxa3xx_nand: fix power management support
Lei Wen
leiwen at marvell.com
Wed Jun 16 21:43:24 EDT 2010
Signed-off-by: Lei Wen <leiwen at marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
---
drivers/mtd/nand/pxa3xx_nand.c | 48 +++++++++++++++++++++++++++++++--------
1 files changed, 38 insertions(+), 10 deletions(-)
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 96b46e1..e4de69c 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1695,26 +1695,54 @@ static int __devinit pxa3xx_nand_probe(struct
platform_device *pdev)
#ifdef CONFIG_PM
static int pxa3xx_nand_suspend(struct platform_device *pdev,
pm_message_t state)
{
- struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand *nand= platform_get_drvdata(pdev);
+ struct pxa3xx_nand_info *info;
+ struct mtd_info *mtd;
+ int ret = 0;
+ uint8_t cs;
- if (info->state & STATE_CMD_PREPARED) {
- dev_err(&pdev->dev, "driver busy, state = %d\n", info->state);
+ if (nand->state & STATE_CMD_PREPARED) {
+ dev_err(&pdev->dev, "driver busy, state = %d\n", nand->state);
return -EAGAIN;
}
- return 0;
+ for (cs = 0; cs < NUM_CHIP_SELECT; cs ++) {
+ info = nand->info[cs];
+ if (!info)
+ continue;
+ mtd = get_mtd_by_info(info);
+ ret = mtd->suspend(mtd);
+ }
+
+ return ret;
}
static int pxa3xx_nand_resume(struct platform_device *pdev)
{
- struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
- struct mtd_info *mtd = info->mtd;
+ struct pxa3xx_nand *nand= platform_get_drvdata(pdev);
+ struct pxa3xx_nand_info *info;
+ struct mtd_info *mtd;
+ uint8_t cs;
- nand_writel(info, NDTR0CS0, info->ndtr0cs0);
- nand_writel(info, NDTR1CS0, info->ndtr1cs0);
- clk_enable(info->clk);
+ for (cs = 0; cs < NUM_CHIP_SELECT; cs ++) {
+ info = nand->info[cs];
+ if (!info)
+ continue;
+ nand_writel(nand, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(nand, NDTR1CS0, info->ndtr1cs0);
+ nand->chip_select = cs;
+ /* Sometimes nand chip would raise a ready interrupt
+ * when resume, reset the by start and stop to prevent
+ * it damage driver's state machine */
+ pxa3xx_nand_start(nand);
+ pxa3xx_nand_stop(nand);
+ mtd = get_mtd_by_info(info);
+ mtd->resume(mtd);
+ }
+ /* set the controller cs to a invalid num to let driver
+ * reconfigure the timing when it call the cmdfunc */
+ nand->chip_select = 0xff;
return 0;
}
#else
--
1.7.0.4
More information about the linux-arm-kernel
mailing list