[PATCH 1/4] [ARM] Remove now unnecessary dma_needs_bounce()
Eric Miao
eric.y.miao at gmail.com
Fri Jun 18 00:03:46 EDT 2010
On Sat, Jun 5, 2010 at 3:55 PM, Eric Miao <eric.y.miao at gmail.com> wrote:
> With a correct dev->dma_mask before calling dmabounce_register_dev(),
> dma_needs_bounce() is not necessary.
>
> The above is true for it8152.c and ixp4xx/common-pci.c.
>
> The sa1111, though, is a bit complicated. Until it's fully understood
> and fixed, dma_needs_bounce() for sa1111 is kept if CONFIG_SA1111 is
> enabled with no side effect (with the condition of machine_is_*)
>
Sorry I forgot to CC you two. Any feedback is welcome, thanks.
> Signed-off-by: Eric Miao <eric.y.miao at gmail.com>
> ---
> arch/arm/common/it8152.c | 8 --------
> arch/arm/include/asm/dma-mapping.h | 7 +++++++
> arch/arm/mach-ixp4xx/common-pci.c | 5 -----
> 3 files changed, 7 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
> index 7974baa..6c09135 100644
> --- a/arch/arm/common/it8152.c
> +++ b/arch/arm/common/it8152.c
> @@ -263,14 +263,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
> return 0;
> }
>
> -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
> -{
> - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
> - __func__, dma_addr, size);
> - return (dev->bus == &pci_bus_type) &&
> - ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
> -}
> -
> int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
> {
> it8152_io.start = IT8152_IO_BASE + 0x12000;
> diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
> index 69ce072..c80d4d2 100644
> --- a/arch/arm/include/asm/dma-mapping.h
> +++ b/arch/arm/include/asm/dma-mapping.h
> @@ -298,7 +298,14 @@ extern void dmabounce_unregister_dev(struct device *);
> * DMA access and 1 if the buffer needs to be bounced.
> *
> */
> +#ifdef CONFIG_SA1111
> extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
> +#else
> +static inline int dma_needs_bounce(struct device*, dma_addr_t, size_t)
> +{
> + return 0;
> +}
> +#endif
>
> /*
> * The DMA API, implemented by dmabounce.c. See below for descriptions.
> diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
> index e318153..c7aa0ac 100644
> --- a/arch/arm/mach-ixp4xx/common-pci.c
> +++ b/arch/arm/mach-ixp4xx/common-pci.c
> @@ -337,11 +337,6 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev)
> return 0;
> }
>
> -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
> -{
> - return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
> -}
> -
> /*
> * Only first 64MB of memory can be accessed via PCI.
> * We use GFP_DMA to allocate safe buffers to do map/unmap.
> --
> 1.7.0.4
>
>
More information about the linux-arm-kernel
mailing list