[PATCH 2/7] ARM: Samsung: Add platform definitions for local FIMC/FIMD fifo path

[Sylwester Nawrocki]

From: Marek Szyprowski <m.szyprowski at samsung.com>

Add a common s3c_fifo_link structure that describes a local path link
between 2 multimedia devices (like FIMC and FrameBuffer).

Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
---
 arch/arm/plat-samsung/include/plat/fifo.h |   37 +++++++++++++++++++++++++++++
 1 files changed, 37 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/plat-samsung/include/plat/fifo.h

diff --git a/arch/arm/plat-samsung/include/plat/fifo.h b/arch/arm/plat-samsung/include/plat/fifo.h
new file mode 100644
index 0000000..84d242b
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/fifo.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef FIFO_H_
+#define FIFO_H_
+
+#include <linux/device.h>
+#include <media/v4l2-subdev.h>
+
+/*
+ * The multimedia devices contained in Samsung S3C/S5P SoC series
+ * like framebuffer, camera interface or tv scaler can transfer data
+ * directly between each other through hardware fifo channels.
+ * s3c_fifo_link data structure is an abstraction for such links,
+ * it allows to define V4L2 device drivers hierarchy according to
+ * the hardware structure. Fifo links are mostly unidirectional, exclusive
+ * data buses. To control data transfer in fifo mode synchronization is
+ * is required between drivers at both ends of the fifo channel
+ * (master_dev, slave_dev). s3c_fifo_link:sub_dev is intended  to export
+ * in a consistent way all the functionality of the slave device required
+ * at master device driver to enable transfer through fifo channel.
+ * master_dev and slave_dev is to be setup by the platform code whilst
+ * sub_dev entry will mostly be initlized during slave_dev probe().
+ */
+struct s3c_fifo_link {
+	struct device		*master_dev;
+	struct device		*slave_dev;
+	struct v4l2_subdev	*sub_dev;
+};
+
+#endif /* FIFO_H_ */
+
-- 
1.7.0.4