[RFC,PATCH 1/2] Add a common struct clk

Lothar Waßmann LW at KARO-electronics.de
Mon Jun 14 02:52:25 EDT 2010


Hi,

Uwe Kleine-König writes:
> Hello Lothar,
> 
> On Mon, Jun 14, 2010 at 08:39:21AM +0200, Lothar Waßmann wrote:
> > Hi,
> > 
> > Benjamin Herrenschmidt writes:
> > > On Fri, 2010-06-11 at 12:08 +0200, Lothar Waßmann wrote:
> > > > Hi,
> > > > 
> > > > > > > > Using a mutex in clk_enable()/clk_disable() is a bad idea, since that
> > > > > > > > makes it impossible to call those functions in interrupt context.
> > > > > IMHO if a device generates an irq its clock should already be on.  This
> > > > > way you don't need to enable or disable a clock in irq context.
> > > > >  
> > > > You may want to disable a clock in the IRQ handler. The VPU driver in
> > > > the Freescale BSP for i.MX51 does exactly this.
> > > > Anyway I don't see any reason for using a mutex here instead of
> > > > spin_lock_irq_save() as all other implementations do.
> > > 
> > > Because you suddenly make it impossible to sleep inside enable/disable
> >               ^^^^^^^^^^^^^^^^^^^^^^^^^^^
> > ???
> > All implementations so far use spin_lock_irq_save()!
> > 
> > How would you be able to sleep with a mutex held?
> > If you hold a lock you must not sleep, no matter what sort of lock it
> > is.
> That's wrong.  With a mutex hold you may sleep.
> 
OK, you're right. But still all other implementations (omap, mxc,
davinci,...) use spin_lock_irqsave() to protect the enable/disable
functions and don't seem to have any problem with this.
Is there any reason to change this, or make it inconsistent
for one arch?

And arch/arm/plat-s3c/clock.c has the following comment:
|/* We originally used an mutex here, but some contexts (see resume)
| * are calling functions such as clk_set_parent() with IRQs disabled
| * causing an BUG to be triggered.
| */
|DEFINE_SPINLOCK(clocks_lock);


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________



More information about the linux-arm-kernel mailing list