[PATCH 1/2] [ARM] pxa3xx: add set_type to the ext_wakeup irq chip.

[Igor Grinberg]

pxa3xx cpu needs the irq type setup to be able to
wakeup from low power mode on IRQ_WAKEUPx events.

Signed-off-by: Igor Grinberg <grinberg at compulab.co.il>
Signed-off-by: Mike Rapoport <mike at compulab.co.il>
---
 arch/arm/mach-pxa/pxa3xx.c |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f2f4127..2d54812 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -566,11 +566,23 @@ static void pxa_unmask_ext_wakeup(unsigned int irq)
 	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
 }
 
+static int pxa_set_ext_wakeup_type(unsigned int irq, unsigned int flow_type)
+{
+	if (flow_type & IRQ_TYPE_EDGE_RISING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0);
+
+	if (flow_type & IRQ_TYPE_EDGE_FALLING)
+		PWER |= 1 << (irq - IRQ_WAKEUP0 + 2);
+
+	return 0;
+}
+
 static struct irq_chip pxa_ext_wakeup_chip = {
 	.name		= "WAKEUP",
 	.ack		= pxa_ack_ext_wakeup,
 	.mask		= pxa_mask_ext_wakeup,
 	.unmask		= pxa_unmask_ext_wakeup,
+	.set_type	= pxa_set_ext_wakeup_type,
 };
 
 static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
-- 
1.6.4.4