[PATCH] sdhci-s3c: Add SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk for Samsung SoC

Kukjin Kim kgene.kim at samsung.com
Fri Jun 11 04:08:09 EDT 2010


Kyungmin Park wrote:
> 
> Hi,
> 
> On Thu, Jun 10, 2010 at 8:39 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> > From: Lee Hyuk <hyuk1.lee at samsung.com>
> >
> > On Samsung's SDMMC hosts the timeout clock is derivied from the SD
> > Clock, which is set dynamically.
> > So, checked 'SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK' quirk and removed
> > 'sdhci_s3c_get_timeout_clk' callback which doesn't need any more.
> >
> > Signed-off-by: Hyuk Lee <hyuk1.lee at samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> > ---
> >  drivers/mmc/host/sdhci-s3c.c |   10 +++-------
> >  1 files changed, 3 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> > index af21792..ca09382 100644
> > --- a/drivers/mmc/host/sdhci-s3c.c
> > +++ b/drivers/mmc/host/sdhci-s3c.c
> > @@ -110,11 +110,6 @@ static unsigned int sdhci_s3c_get_max_clk(struct
> sdhci_host *host)
> >        return max;
> >  }
> >
> > -static unsigned int sdhci_s3c_get_timeout_clk(struct sdhci_host *host)
> > -{
> > -       return sdhci_s3c_get_max_clk(host) / 1000000;
> > -}
> > -
> >  /**
> >  * sdhci_s3c_consider_clock - consider one the bus clocks for current
setting
> >  * @ourhost: Our SDHCI instance.
> > @@ -188,7 +183,6 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> >
> >                ourhost->cur_clk = best_src;
> >                host->max_clk = clk_get_rate(clk);
> > -               host->timeout_clk = sdhci_s3c_get_timeout_clk(host);
> >
> >                ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
> >                ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
> > @@ -211,7 +205,6 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> >
> >  static struct sdhci_ops sdhci_s3c_ops = {
> >        .get_max_clock          = sdhci_s3c_get_max_clk,
> > -       .get_timeout_clock      = sdhci_s3c_get_timeout_clk,
> >        .set_clock              = sdhci_s3c_set_clock,
> >  };
> >
> > @@ -335,6 +328,9 @@ static int __devinit sdhci_s3c_probe(struct
> platform_device *pdev)
> >        host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
> >                         SDHCI_QUIRK_32BIT_DMA_SIZE);
> >
> > +       /* HSMMC on Samsung SoCs uses SDCLK as timeout clock. */
> > +       host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
> 
> How do you know Samsung SoCs use SDCLK in the spec?
>
Samsung SoC hardware engineer guided about that.

> Is it also true at s3c64xx series?
> 
Yes, of course.



> 
> > +
> >        ret = sdhci_add_host(host);
> >        if (ret) {
> >                dev_err(dev, "sdhci_add_host() failed\n");
> > --
> > 1.6.2.5
> >
> > --

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list