[PATCH 3/3] s5pv210: Aquila: add definitions for sdhci devices
Kyungmin Park
kmpark at infradead.org
Fri Jun 11 02:05:32 EDT 2010
On Fri, Jun 11, 2010 at 2:18 PM, Ben Dooks <ben-linux at fluff.org> wrote:
> On Wed, Jun 09, 2010 at 11:39:05AM +0200, Marek Szyprowski wrote:
>> This patch add support for SDHCI blocks on Samsung Aquila board. The
>> following host controllers are defined:
>> 1. Internal MoviNAND device (permanently wired to the controller)
>> 2. Internal WiFI SDIO device (card is activated by power regualor)
>> 3. External MMC/SD socket (card detection is provided by external
>> gpio interrupt)
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>> arch/arm/mach-s5pv210/Kconfig | 4 ++
>> arch/arm/mach-s5pv210/mach-aquila.c | 66 +++++++++++++++++++++++++++++++++++
>> 2 files changed, 70 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
>> index b7a2f38..dcc9d74 100644
>> --- a/arch/arm/mach-s5pv210/Kconfig
>> +++ b/arch/arm/mach-s5pv210/Kconfig
>> @@ -57,7 +57,11 @@ config MACH_AQUILA
>> select CPU_S5PV210
>> select ARCH_SPARSEMEM_ENABLE
>> select S5PV210_SETUP_FB_24BPP
>> + select S5PV210_SETUP_SDHCI
>> select S3C_DEV_FB
>> + select S3C_DEV_HSMMC
>> + select S3C_DEV_HSMMC1
>> + select S3C_DEV_HSMMC2
>> select S5PC110_DEV_ONENAND
>> help
>> Machine support for the Samsung Aquila target based on S5PC110 SoC
>> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
>> index fb9dbb2..1b7fe79 100644
>> --- a/arch/arm/mach-s5pv210/mach-aquila.c
>> +++ b/arch/arm/mach-s5pv210/mach-aquila.c
>> @@ -13,6 +13,7 @@
>> #include <linux/init.h>
>> #include <linux/serial_core.h>
>> #include <linux/fb.h>
>> +#include <linux/gpio.h>
>>
>> #include <asm/mach/arch.h>
>> #include <asm/mach/map.h>
>> @@ -22,12 +23,15 @@
>> #include <mach/map.h>
>> #include <mach/regs-clock.h>
>> #include <mach/regs-fb.h>
>> +#include <mach/regs-gpio.h>
>>
>> #include <plat/regs-serial.h>
>> #include <plat/s5pv210.h>
>> #include <plat/devs.h>
>> #include <plat/cpu.h>
>> #include <plat/fb.h>
>> +#include <plat/gpio-cfg.h>
>> +#include <plat/sdhci.h>
>>
>> /* Following are default values for UCON, ULCON and UFCON UART registers */
>> #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
>> @@ -116,9 +120,66 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
>> .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
>> };
>>
>> +/* MoviNAND */
>> +static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
>> + .max_width = 4,
>> + .cd_type = S3C_SDHCI_CD_PERMANENT,
>> +};
>> +
>> +/* Wireless LAN */
>> +static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
>> + .max_width = 4,
>> + .cd_type = S3C_SDHCI_CD_EXTERNAL,
>> + /* ext_cd_{init,cleanup} callbacks will be added later */
>> +};
>> +
>> +/* External Flash */
>> +#define AQUILA_EXT_FLASH_IRQ IRQ_EINT(28) /* S5PV210_GPH3(4) */
>> +#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
>> +#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
>> +
>> +static irqreturn_t aquila_ext_flash_card_detect_isr(int irq, void *dev_id)
>> +{
>> + void (*notify_func)(struct platform_device *, int state) = dev_id;
>> + notify_func(&s3c_device_hsmmc2, !gpio_get_value(AQUILA_EXT_FLASH_CD));
>> + return IRQ_HANDLED;
>> +}
>
> hmm, not very nice this.
>
> I'd much prefer to see a gpio-based handler in either the sdhci core or
> at-least in the driver's directory since I'm sure that his is (a) something
> Thomas Abrahama has already published patches for (which do need work) and
Maybe you see the samsung internal codes. but I think the baseline is
mailing list, others are implement the same functionality with
different place. can you tell me which mail has these one?
Thank you,
Kyungmin Park
> (b) probably going to be needed by other boards and/or other architectures.
>
>> +static int aquila_ext_flash_card_detect_init(
>> + void (*notify_func)(struct platform_device *, int state))
>> +{
>> + gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
>> + gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
>> +
>> + if (request_irq(AQUILA_EXT_FLASH_IRQ, aquila_ext_flash_card_detect_isr,
>> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
>> + "SDHCI card detect", notify_func))
>> + printk(KERN_ERR "Error: cannot request irq for External Flash\n");
>> + return 0;
>> +}
>> +
>> +static int aquila_ext_flash_card_detect_cleanup(
>> + void (*notify_func)(struct platform_device *, int state))
>> +{
>> + free_irq(AQUILA_EXT_FLASH_IRQ, notify_func);
>> + gpio_direction_output(AQUILA_EXT_FLASH_EN, 0);
>> + gpio_free(AQUILA_EXT_FLASH_EN);
>> + return 0;
>> +}
>> +
>> +static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
>> + .max_width = 4,
>> + .cd_type = S3C_SDHCI_CD_EXTERNAL,
>> + .ext_cd_init = aquila_ext_flash_card_detect_init,
>> + .ext_cd_cleanup = aquila_ext_flash_card_detect_cleanup,
>> +};
>> +
>> static struct platform_device *aquila_devices[] __initdata = {
>> &s3c_device_fb,
>> &s5pc110_device_onenand,
>> + &s3c_device_hsmmc0,
>> + &s3c_device_hsmmc1,
>> + &s3c_device_hsmmc2,
>> };
>>
>> static void __init aquila_map_io(void)
>> @@ -130,6 +191,11 @@ static void __init aquila_map_io(void)
>>
>> static void __init aquila_machine_init(void)
>> {
>> + /* SDHCI */
>> + s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
>> + s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
>> + s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
>> +
>> /* FB */
>> s3c_fb_set_platdata(&aquila_lcd_pdata);
>>
>> --
>> 1.7.1.240.g225c
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> --
> --
> Ben
>
> Q: What's a light-year?
> A: One-third less calories than a regular year.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list