[PATCH 10/10] arm: Allow PHYS_OFFSET to be runtime determined
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Thu Jun 10 06:27:16 EDT 2010
This bases on work done earlier by Lennert Buytenhek and Mark A. Greer.
Compared to their approach zreladdr isn't guessed based on the pc
register but the bootloader is expected to pass PHYS_OFFSET in r3. If
that value doesn't look right (e.g. isn't aligned) it is guessed based
on the value of sp. This should work for CONFIG_ZBOOT_ROM, too.
To use it for your machine removing the definition of PHYS_OFFSET from
<mach/memory.h> and selecting CONFIG_RUNTIME_PHYS_OFFSET should be
enough.
Cc: Lennert Buytenhek <buytenh at wantstofly.org>
Cc: Steve Chen <schen at mvista.com>
Cc: Mark A. Greer <mgreer at mvista.com>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
This patch is only included as I forgot to take it out before sending the
initial mail. But maybe it's not bad to have it in this thread, too.
Best regards
Uwe
Documentation/arm/Booting | 1 +
arch/arm/Kconfig | 3 ++
arch/arm/boot/compressed/Makefile | 1 +
arch/arm/boot/compressed/head.S | 50 +++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/memory.h | 5 +++
arch/arm/kernel/head.S | 31 +++++++++++++++++------
arch/arm/kernel/setup.c | 10 ++++++-
7 files changed, 92 insertions(+), 9 deletions(-)
diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting
index 7685029..ec228a4 100644
--- a/Documentation/arm/Booting
+++ b/Documentation/arm/Booting
@@ -126,6 +126,7 @@ In either case, the following conditions must be met:
r0 = 0,
r1 = machine type number discovered in (3) above.
r2 = physical address of tagged list in system RAM.
+ r3 = PHYS_OFFSET
- CPU mode
All forms of interrupts must be disabled (IRQs and FIQs)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a53ac65..7ac29a5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1374,6 +1374,9 @@ config UACCESS_WITH_MEMCPY
However, if the CPU data cache is using a write-allocate mode,
this option is unlikely to provide any performance gain.
+config RUNTIME_PHYS_OFFSET
+ bool
+
config DEPRECATED_PARAM_STRUCT
bool "Provide old way to pass kernel parameters"
help
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 5419448..0660a25 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -4,6 +4,7 @@
# create a compressed vmlinuz image from the original vmlinux
#
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
OBJS = misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index dbeeb56..e066d26 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -120,6 +120,16 @@ wait: mrc p14, 0, pc, c0, c1, 0
#endif
.endm
+ .macro debug_passed_physoffset
+#ifdef DEBUG
+ bleq 1f
+ kputc #'!'
+ kphex r9, 8
+ kputc #'\n'
+1:
+#endif
+ .endm
+
.section ".start", #alloc, #execinstr
/*
* sort out different calling conventions
@@ -137,6 +147,7 @@ start:
.word _edata @ zImage end address
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
+ mov r9, r3 @ save phys_offset
#ifndef __ARM_ARCH_2__
/*
@@ -234,6 +245,44 @@ not_relocated: mov r0, #0
cmp r2, r3
blo 1b
+#ifdef CONFIG_RUNTIME_PHYS_OFFSET
+ /*
+ * assert physoffset passed by bootloader is properly
+ * 2MiB-aligned, ...
+ */
+ ldr r10, =0x001fffff
+
+ tst r9, r10
+ debug_passed_physoffset
+ tst r9, r10
+
+ /*
+ * ... if not guess it based on sp.
+ * sp & 0xf8000000 should work for most machines. The needed
+ * preconditions are:
+ * - physoffset is aligned to a 128MiB boundary
+ * (As of Jan 2010 all but s3c2400, u300 and at91 have it.
+ * For the latter it depends on configuration.)
+ * - sp < physoffset + 128MiB (which is definitely true if you
+ * only have 128MiB of RAM or less)
+ */
+ andne r9, sp, #0xf8000000
+
+#ifdef DEBUG
+ kputc #'P'
+ kphex r9, 8
+ kputc #'\n'
+#endif
+
+ add r4, r9, #TEXT_OFFSET
+#else /* ifdef CONFIG_RUNTIME_PHYS_OFFSET */
+ /* warn on r4(ZRELADDR) != r9 + TEXT_OFFSET */
+ add r10, r9, #TEXT_OFFSET
+ cmp r10, r4
+ debug_passed_physoffset
+
+#endif /* ifdef CONFIG_RUNTIME_PHYS_OFFSET / else */
+
/*
* The C runtime environment should now be setup
* sufficiently. Turn the cache on, set up some
@@ -570,6 +619,7 @@ call_kernel: bl cache_clean_flush
mov r0, #0 @ must be zero
mov r1, r7 @ restore architecture number
mov r2, r8 @ restore atags pointer
+ sub r3, r4, #TEXT_OFFSET @ physoffset
mov pc, r4 @ call kernel
/*
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 4312ee5..05a7a3f 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -24,6 +24,11 @@
*/
#define UL(x) _AC(x, UL)
+#if defined(CONFIG_RUNTIME_PHYS_OFFSET) && !defined(__ASSEMBLY__)
+extern unsigned long phys_offset;
+#define PHYS_OFFSET phys_offset
+#endif
+
#ifdef CONFIG_MMU
/*
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index eb62bf9..b173bb6 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -22,12 +22,14 @@
#include <asm/thread_info.h>
#include <asm/system.h>
+#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
#if (PHYS_OFFSET & 0x001fffff)
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
#endif
+#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
+#endif
#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
-#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
/*
@@ -44,8 +46,8 @@
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
- .macro pgtbl, rd
- ldr \rd, =(KERNEL_RAM_PADDR - 0x4000)
+ .macro pgtbl, rd, phys_offset
+ add \rd, \phys_offset, #(TEXT_OFFSET - 0x4000)
.endm
#ifdef CONFIG_XIP_KERNEL
@@ -215,9 +217,25 @@ ENDPROC(__turn_mmu_on)
* Returns:
* r0, r3, r6, r7 corrupted
* r4 = physical page table address
+ * r5 = physical start address of (the first bank of) RAM (PHYS_OFFSET)
*/
__create_page_tables:
- pgtbl r4 @ page table address
+#if defined(CONFIG_RUNTIME_PHYS_OFFSET)
+ @ stext is at PHYS_OFFSET + TEXT_OFFSET. As PHYS_OFFSET has to be
+ @ 2MiB-aligned and assuming that TEXT_OFFSET < 2MiB
+ @ stext & 0xffe00000 yields PHYS_OFFSET
+ adr r5, stext
+ ldr r4, =0xffe00000
+ and r5, r5, r4
+
+ @ save phys_offset
+ ldr r4, =(phys_offset - PAGE_OFFSET)
+ str r5, [r4, r5]
+#else
+ ldr r5, =PHYS_OFFSET
+#endif
+
+ pgtbl r4, r5 @ r4 = page table address
/*
* Clear the 16K level 1 swapper page table
@@ -282,10 +300,7 @@ __create_page_tables:
* Then map first 1MB of ram in case it contains our boot params.
*/
add r0, r4, #PAGE_OFFSET >> 18
- orr r6, r7, #(PHYS_OFFSET & 0xff000000)
- .if (PHYS_OFFSET & 0x00f00000)
- orr r6, r6, #(PHYS_OFFSET & 0x00f00000)
- .endif
+ orr r6, r7, r5
str r6, [r0]
#ifdef CONFIG_DEBUG_LL
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index cbc6ddb..02fe334 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -69,6 +69,12 @@ __setup("fpe=", fpe_setup);
extern void paging_init(struct machine_desc *desc);
extern void reboot_setup(char *str);
+#if defined(CONFIG_RUNTIME_PHYS_OFFSET)
+/* assign a value to prevent phys_offset from ending in up bss */
+unsigned long phys_offset = 0xdeadbeef;
+EXPORT_SYMBOL(phys_offset);
+#endif
+
unsigned int processor_id;
EXPORT_SYMBOL(processor_id);
unsigned int __machine_arch_type;
@@ -650,7 +656,7 @@ static struct init_tags {
{ tag_size(tag_core), ATAG_CORE },
{ 1, PAGE_SIZE, 0xff },
{ tag_size(tag_mem32), ATAG_MEM },
- { MEM_SIZE, PHYS_OFFSET },
+ { MEM_SIZE, },
{ 0, ATAG_NONE }
};
@@ -691,6 +697,8 @@ void __init setup_arch(char **cmdline_p)
tags = phys_to_virt(__atags_pointer);
else if (mdesc->boot_params)
tags = phys_to_virt(mdesc->boot_params);
+ else
+ init_tags.mem.start = PHYS_OFFSET;
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
--
1.7.1
More information about the linux-arm-kernel
mailing list