[PATCH 0/5] Enable pxa310 usb otg port host mode.
Mike Rapoport
mike at compulab.co.il
Wed Jun 9 07:49:51 EDT 2010
Eric, Greg,
Any comments on this?
Igor Grinberg wrote:
> This patch series extends the existing usb ulpi generic driver
> with support for Function and Interface control of the ULPI PHYs,
> adds support for SMSC USB3319 ulpi phy,
> implement the pxa310 specific ulpi functionality and make pxa specific ohci
> implementation aware of pxa310 usb otg port host mode.
>
> Igor Grinberg (5):
> usb/otg/ulpi: extend the generic ulpi driver.
> usb/otg/ulpi: add support for SMSC USB3319 ulpi phy.
> [ARM] pxa: add PXA310 specific ULPI implementation
> [ARM] usb/host/ohci-pxa27x: make PXA310 USB OTG port work in host
> mode.
> [ARM] pxa/cm-x300: enable USB host port 2 on CM-X300 with PXA310 cpu.
>
> arch/arm/mach-mx2/mach-pca100.c | 10 +-
> arch/arm/mach-mx3/mach-armadillo5x0.c | 10 +-
> arch/arm/mach-mx3/mach-mx31lite.c | 5 +-
> arch/arm/mach-mx3/mach-mx31moboard.c | 5 +-
> arch/arm/mach-mx3/mach-pcm037.c | 10 +-
> arch/arm/mach-mx3/mach-pcm043.c | 5 +-
> arch/arm/mach-pxa/Kconfig | 4 +
> arch/arm/mach-pxa/Makefile | 1 +
> arch/arm/mach-pxa/cm-x300.c | 102 ++++++++++++++
> arch/arm/mach-pxa/include/mach/ohci.h | 3 +
> arch/arm/mach-pxa/include/mach/pxa310-ulpi.h | 19 +++
> arch/arm/mach-pxa/include/mach/regs-u2d.h | 2 +
> arch/arm/mach-pxa/pxa310-ulpi.c | 110 +++++++++++++++
> drivers/usb/host/ohci-pxa27x.c | 183 ++++++++++++++++++++++++++
> drivers/usb/otg/Kconfig | 2 -
> drivers/usb/otg/ulpi.c | 65 ++++++++-
> include/linux/usb/ulpi.h | 25 ++++-
> 17 files changed, 542 insertions(+), 19 deletions(-)
> create mode 100644 arch/arm/mach-pxa/include/mach/pxa310-ulpi.h
> create mode 100644 arch/arm/mach-pxa/pxa310-ulpi.c
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Sincerely yours,
Mike.
More information about the linux-arm-kernel
mailing list