[PATCH 4/4] ARM: cns3xxx: Add support for AHCI controllers
Anton Vorontsov
cbouatmailru at gmail.com
Tue Jun 8 13:02:17 EDT 2010
CNS3xxx chips have AHCI-compatible SATA controller. This patch adds
the support using generic ahci_platform driver.
Signed-off-by: Anton Vorontsov <avorontsov at mvista.com>
---
arch/arm/mach-cns3xxx/cns3420vb.c | 1 +
arch/arm/mach-cns3xxx/devices.c | 52 +++++++++++++++++++++++++++++++++++++
arch/arm/mach-cns3xxx/devices.h | 1 +
3 files changed, 54 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 04ae1ce..9df8391 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -118,6 +118,7 @@ static void __init cns3420_init(void)
{
platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs));
+ cns3xxx_ahci_init();
cns3xxx_sdhci_init();
pm_power_off = cns3xxx_power_off;
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
index b01a301..50b4d31 100644
--- a/arch/arm/mach-cns3xxx/devices.c
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <linux/init.h>
#include <linux/compiler.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <mach/cns3xxx.h>
#include <mach/irqs.h>
@@ -21,6 +22,57 @@
#include "devices.h"
/*
+ * AHCI
+ */
+static struct resource cns3xxx_ahci_resource[] = {
+ [0] = {
+ .start = CNS3XXX_SATA2_BASE,
+ .end = CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_CNS3XXX_SATA,
+ .end = IRQ_CNS3XXX_SATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_ahci_pdev = {
+ .name = "ahci",
+ .id = 0,
+ .resource = cns3xxx_ahci_resource,
+ .num_resources = ARRAY_SIZE(cns3xxx_ahci_resource),
+ .dev = {
+ .dma_mask = &cns3xxx_ahci_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init cns3xxx_ahci_init(void)
+{
+ u32 tmp;
+
+ tmp = __raw_readl(MISC_SATA_POWER_MODE);
+ tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */
+ tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */
+ __raw_writel(tmp, MISC_SATA_POWER_MODE);
+
+ /* Enable SATA PHY */
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0);
+ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1);
+
+ /* Enable SATA Clock */
+ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA);
+
+ /* De-Asscer SATA Reset */
+ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
+
+ platform_device_register(&cns3xxx_ahci_pdev);
+}
+
+/*
* SDHCI
*/
static struct resource cns3xxx_sdhci_resources[] = {
diff --git a/arch/arm/mach-cns3xxx/devices.h b/arch/arm/mach-cns3xxx/devices.h
index 0735a45..27e15a1 100644
--- a/arch/arm/mach-cns3xxx/devices.h
+++ b/arch/arm/mach-cns3xxx/devices.h
@@ -14,6 +14,7 @@
#ifndef __CNS3XXX_DEVICES_H_
#define __CNS3XXX_DEVICES_H_
+void __init cns3xxx_ahci_init(void);
void __init cns3xxx_sdhci_init(void);
#endif /* __CNS3XXX_DEVICES_H_ */
--
1.7.0.5
More information about the linux-arm-kernel
mailing list