[PATCH v2 3/5] ARM: S3C64XX: Add support for Compact Flash driver on SMDK6410
Kukjin Kim
kgene.kim at samsung.com
Tue Jun 8 05:06:58 EDT 2010
From: Abhilash Kesavan <a.kesavan at samsung.com>
Following is added for the CF-ATA driver:
- Platform data strucure instantiation
- Platform device enabling code
- Addition of cfcon clock
- Platform-specific gpio setup code
Signed-off-by: Abhilash Kesavan <a.kesavan at samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
---
arch/arm/mach-s3c64xx/Kconfig | 7 +++
arch/arm/mach-s3c64xx/Makefile | 1 +
arch/arm/mach-s3c64xx/clock.c | 6 +++
arch/arm/mach-s3c64xx/include/mach/map.h | 4 ++
arch/arm/mach-s3c64xx/include/mach/regs-clock.h | 5 ++
arch/arm/mach-s3c64xx/mach-smdk6410.c | 8 ++++
arch/arm/mach-s3c64xx/s3c6410.c | 2 +
arch/arm/mach-s3c64xx/setup-ide.c | 46 +++++++++++++++++++++++
8 files changed, 79 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s3c64xx/setup-ide.c
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index f5a5972..12f063b 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -57,6 +57,11 @@ config S3C64XX_SETUP_I2C1
help
Common setup code for i2c bus 1.
+config S3C64XX_SETUP_IDE
+ bool
+ help
+ Common setup code for S3C64XX IDE.
+
config S3C64XX_SETUP_FB_24BPP
bool
help
@@ -95,6 +100,7 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
+ select SAMSUNG_DEV_IDE
select S3C_DEV_FB
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
@@ -103,6 +109,7 @@ config MACH_SMDK6410
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
+ select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
help
Machine support for the Samsung SMDK6410
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 9d10069..aa5c367 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_S3C64XX_DMA) += dma.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index fbd85a9..7772f92 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -310,6 +310,12 @@ static struct clk init_clocks[] = {
.id = -1,
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }, {
+ .name = "cfcon",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_IHOST,
}
};
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index e1eab3c..1caaa5f 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -86,6 +86,9 @@
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
+
+#define S3C64XX_PA_CFCON (0x70300000)
+
#define S3C64XX_PA_VIC0 (0x71200000)
#define S3C64XX_PA_VIC1 (0x71300000)
@@ -120,5 +123,6 @@
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
+#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
#endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
index 0114eb0..05332b9 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-clock.h
@@ -34,6 +34,7 @@
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
#define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C)
+#define S3C_MEM_SYS_CFG S3C_CLKREG(0x120)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12)
@@ -154,4 +155,8 @@
#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2)
#define S3C6400_CLKSRC_MFC (1 << 4)
+/* MEM_SYS_CFG */
+#define MEM_SYS_CFG_INDEP_CF 0x4000
+#define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
+
#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d9a0355..0d7d93f 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -56,6 +56,7 @@
#include <mach/regs-gpio.h>
#include <mach/regs-sys.h>
#include <mach/regs-srom.h>
+#include <plat/ata.h>
#include <plat/iic.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
@@ -242,6 +243,10 @@ static struct platform_device smdk6410_b_pwr_5v = {
};
#endif
+static struct s3c_ide_platdata smdk6410_ide_pdata __initdata = {
+ .setup_gpio = s3c64xx_ide_setup_gpio,
+};
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
@@ -265,6 +270,7 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&smdk6410_smsc911x,
&s3c_device_adc,
+ &s3c_device_cfcon,
&s3c_device_ts,
&s3c_device_wdt,
};
@@ -665,6 +671,8 @@ static void __init smdk6410_machine_init(void)
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+ s3c_ide_set_platdata(&smdk6410_ide_pdata);
+
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 014401c..3ad25d2 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -37,6 +37,7 @@
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/sdhci.h>
+#include <plat/ata-core.h>
#include <plat/iic-core.h>
#include <plat/adc.h>
#include <plat/onenand-core.h>
@@ -58,6 +59,7 @@ void __init s3c6410_map_io(void)
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
+ s3c_cfcon_setname("s3c64xx-pata");
}
void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c64xx/setup-ide.c b/arch/arm/mach-s3c64xx/setup-ide.c
new file mode 100644
index 0000000..c12c315
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-ide.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s3c64xx/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S3C64XX setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_ide_setup_gpio(void)
+{
+ u32 reg;
+ u32 gpio = 0;
+
+ reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
+
+ /* Independent CF interface, CF chip select configuration */
+ writel(reg | MEM_SYS_CFG_INDEP_CF |
+ MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S3C_MEM_SYS_CFG);
+
+ s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
+
+ /* Set XhiDATA[15:0] pins as CF Data[15:0] */
+ for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+
+ /* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
+ for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+
+ /* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
+ s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
+ for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+}
--
1.6.2.5
More information about the linux-arm-kernel
mailing list