[PATCH 2/2] at91sam9g20ek: add fixed-value regulator for wm8731

[avictor.za at gmail.com]

hi Dmitry,

> If CONFIG_REGULATOR is enabled, wm8731 fails on AT91SAM9G20EK board,
> since codec driver requires several voltage supplies and none are
> provided currently. As requires voltages are hardwired to 3V3, use fixed
> voltage regulator for this chip.
>
> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov at gmail.com>

Acked-by: Andrew Victor <linux at maxim.org.za>

Please submit to the patch system.