[TEMP PATCH v2] Re: make ARM=arm menuconfig problem in mainline

[Randy Dunlap]

On 06/02/10 17:25, Ben Dooks wrote:
> On Wed, Jun 02, 2010 at 09:49:46AM -0700, Randy Dunlap wrote:
>> On 06/02/10 09:08, Nobin Mathew wrote:
>>>
>>> On Wed, Jun 2, 2010 at 9:27 PM, Randy Dunlap <randy.dunlap at oracle.com> wrote:
>>>> On Wed, 2 Jun 2010 20:04:28 +0530 Nobin Mathew wrote:
>>>>
>>>>> adding linux-arm-kernel at lists.infradead.org
>>>>>
>>>>> Hi,
>>>>>
>>>>> The following entry creates problem in ARM System type menu. I am
>>>>> using a Fedora 12 system.
>>>>
>>>> What kind of problem does it create?
>>>> It seems to work for me (on f11, not f12).
>>>> Does it have something to do with F12 specifically?
>>>>
>>>>
>>>>> Length of bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440,
>>>>> S3C2442, S3C2443, S3C2450" is the problem. How can I fix it.
>>>>
>>>> Describe the problem, please.
>>
>> [please don't top-post]
> 
> 
> I can think of several solutions, the first being to remove the S3C prefix
> friom all these.
> 
> S3C24XX is not acceptable, there's S3C series that are either too old to
> be bothered with, or don't fit under this architecture.

and not in the current kernel tree?
I did not find any others in the current tree....

> how about Samsung S3C: 2410,2412/3,2416,2440/2442,2443,2450

OK, that works.

For kbuild/kconfig people:  run:
make ARCH=arm O=test menuconfig

and then select System Type & ARM system type.  The kconfig "choice" menu at this
point looks empty.  It seems to be just a text windowing/display problem.
Pressing the down/up arrow keys will display the choices, although not where they
should be displayed in the rectangle, and they can be selected there.


>>> Sorry if attachments are not allowed, when I go to select ARM system
>>> type(OMAP, Davinci etc), I am not seeing any entries there in the pop
>>> up window. When I remove  bool "Samsung S3C2410, S3C2412, S3C2413,
>>> S3C2416, S3C2440,
>>>>> S3C2442, S3C2443, S3C2450"  it is working fine. I feel it is something to do with length of that string.
>>>
>>> Thanks
>>> Nobin
>>
>>
>> OK, I see that now.  Well, it is some kind of problem.
>> Adding cc to linux-kbuild mailing list.
>>
>>
>> The patch below fixes the problem temporarily, but the bool string length does
>> seem to be a problem.
>>
>> Thanks for your report.


---
From: Randy Dunlap <randy.dunlap at oracle.com>

"bool <long string>" causes kconfig choices not to be displayed
correctly, so temporarily change it to a shorter string until a real
fix is found.

Signed-off-by: Randy Dunlap <randy.dunlap at oracle.com>
Reported-by: Nobin Mathew <nobin.mathew at gmail.com>
Cc: Ben Dooks <ben-linux at fluff.org>
---
 arch/arm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-next-20100602.orig/arch/arm/Kconfig
+++ linux-next-20100602/arch/arm/Kconfig
@@ -629,7 +629,7 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
+	bool "Samsung S3C: 2410,2412/3,2416,2440/2442,2443,2450"
 	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK