[PATCH] S5V310: I2C0/I2C1/I2C2 support

[Kyungmin Park]

On Sat, Jul 31, 2010 at 11:05 AM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Kyungmin Park wrote:
>>
>> From: Kyungmin Park <kyungmin.park at samsung.com>
>>
>> Configure proper mux pins and define i2c0/i2c1/i2c2.
>>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>>  arch/arm/mach-s5pv310/Kconfig      |   10 ++++++++++
>>  arch/arm/mach-s5pv310/Makefile     |    5 +++++
>>  arch/arm/mach-s5pv310/setup-i2c0.c |   12 ++++++++++--
>>  arch/arm/mach-s5pv310/setup-i2c1.c |   25 +++++++++++++++++++++++++
>>  arch/arm/mach-s5pv310/setup-i2c2.c |   26 ++++++++++++++++++++++++++
>>  5 files changed, 76 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/arm/mach-s5pv310/setup-i2c1.c
>>  create mode 100644 arch/arm/mach-s5pv310/setup-i2c2.c
>>
>
> (snip)
>
>> +#include <mach/gpio.h>
> Should be <linux/gpio.h>

It comes from your previous patch.

Anyway I will fix it. and resend it.
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
>