[PATCH 3/5] ARM: S5P6440: Add RTC support for S5P6440

[Kukjin Kim]

Ben Dooks wrote:
> 
> On 21/07/10 10:00, Kukjin Kim wrote:
> > From: Atul Dahiya <atul.dahiya at samsung.com>
> >
> > This patch adds support RTC driver for Samsung S5P6440.
> >
> > Signed-off-by: Atul Dahiya <atul.dahiya at samsung.com>
> > Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> > ---
> >  arch/arm/mach-s5p6440/Kconfig            |    2 ++
> >  arch/arm/mach-s5p6440/include/mach/map.h |    2 +-
> >  arch/arm/mach-s5p6440/mach-smdk6440.c    |    1 +
> >  3 files changed, 4 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-s5p6440/Kconfig
b/arch/arm/mach-s5p6440/Kconfig
> > index f066fae..b2d4716 100644
> > --- a/arch/arm/mach-s5p6440/Kconfig
> > +++ b/arch/arm/mach-s5p6440/Kconfig
> > @@ -18,7 +18,9 @@ config MACH_SMDK6440
> >  	select CPU_S5P6440
> >  	select SAMSUNG_DEV_TS
> >  	select SAMSUNG_DEV_ADC
> > +	select S3C_DEV_RTC
> >  	select S3C_DEV_WDT
> > +	select HAVE_S3C_RTC
> >  	select HAVE_S3C2410_WATCHDOG
> >  	help
> >  	  Machine support for the Samsung SMDK6440
> 
> I'm considering we shoudl just set HAVE_S3C_RTC for
> each SOC, as allowing it to compile isn't going to
> end up causing a problem. Adding it to each machine
> will end up with large Kconfig entries for each.
> 
Yes..I agree with you...So submitted '[PATCH] ARM: SAMSUNG: Make RTC driver
dependency SoC specific instead of machine specific' together.
And to separate moving dependency from machine to SoC patch can help to
avoid conflict during merging because as you know adding it to each SoC
needs to change arch/arm/Kconfig.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.