[PATCH] s5pv210/s5pv310: Fix wrong UFCON Tx/Rx definitions

[Kukjin Kim]

Kyungmin Park wrote:
> 
Hi,

Cc'ed Ben Dooks.

> S5PV210/V310 have different Tx/Rx trigger level on each UARTs
> But now use the wrong definitions so we can't set the exact trigger level.
>
Ok...

> I think it should go rc window and also fix it at each the board.
> 
But just I prefer don't mind adding unnecessary definitions.
There is no use adding all the #defines now.

Anyway, default trigger level defines are used in arch/arm code only. So
when new #define is required, it can be added.

And "fix" patch should only fix the issue. But this patch is adding new
#defines.

> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h
b/arch/arm/plat-
> samsung/include/plat/regs-serial.h
> index 788837e..8839733 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-serial.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
> @@ -199,15 +199,52 @@
>  #define S5PV210_UCON_PCLK	(0<<10)
>  #define S5PV210_UCON_UCLK	(1<<10)
> 
> +/*
> + * S5PV210/S5PV310 UART TX trigger level is different at each UARTs
> + * The below wrong values will be removed. Now some boards use it. so
remain it.
> + */
>  #define S5PV210_UFCON_TXTRIG0	(0<<8)
>  #define S5PV210_UFCON_TXTRIG4	(1<<8)
>  #define S5PV210_UFCON_TXTRIG8	(2<<8)
>  #define S5PV210_UFCON_TXTRIG16	(3<<8)
>  #define S5PV210_UFCON_TXTRIG32	(4<<8)
>  #define S5PV210_UFCON_TXTRIG64	(5<<8)
> -#define S5PV210_UFCON_TXTRIG128 (6<<8)
> -#define S5PV210_UFCON_TXTRIG256 (7<<8)
> -
> +#define S5PV210_UFCON_TXTRIG128	(6<<8)
> +#define S5PV210_UFCON_TXTRIG256	(7<<8)
> +
> +#define S5PV210_UFCON_UART0_TXTRIG0	(0<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG32	(1<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG64	(2<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG96	(3<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG128	(4<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG160	(5<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG192	(6<<8)
> +#define S5PV210_UFCON_UART0_TXTRIG224	(7<<8)
> +
> +#define S5PV210_UFCON_UART1_TXTRIG0	(0<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG8	(1<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG16	(2<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG24	(3<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG32	(4<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG40	(5<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG48	(6<<8)
> +#define S5PV210_UFCON_UART1_TXTRIG56	(7<<8)
> +
> +#define S5PV210_UFCON_UART23_TXTRIG0	(0<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG2	(1<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG4	(2<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG6	(3<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG8	(4<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG10	(5<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG12	(6<<8)
> +#define S5PV210_UFCON_UART23_TXTRIG14	(7<<8)
> +
> +#define S5PV210_UFCON_TXTRIGMAX		(7<<8)
> +
> +/*
> + * S5PV210/S5PV310 UART RX trigger level is different at each UARTs
> + * The below wrong values will be removed. Now some boards use it. so
remain it.
> + */
>  #define S5PV210_UFCON_RXTRIG1	(0<<4)
>  #define S5PV210_UFCON_RXTRIG4	(1<<4)
>  #define S5PV210_UFCON_RXTRIG8	(2<<4)
> @@ -217,6 +254,35 @@
>  #define S5PV210_UFCON_RXTRIG128	(6<<4)
>  #define S5PV210_UFCON_RXTRIG256	(7<<4)
> 
> +#define S5PV210_UFCON_UART0_RXTRIG32	(0<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG64	(1<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG96	(2<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG128	(3<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG160	(4<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG192	(5<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG224	(6<<4)
> +#define S5PV210_UFCON_UART0_RXTRIG256	(7<<4)
> +
> +#define S5PV210_UFCON_UART1_RXTRIG8	(0<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG16	(1<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG24	(2<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG32	(3<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG40	(4<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG48	(5<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG56	(6<<4)
> +#define S5PV210_UFCON_UART1_RXTRIG64	(7<<4)
> +
> +#define S5PV210_UFCON_UART23_RXTRIG2	(0<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG4	(1<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG6	(2<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG8	(3<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG10	(4<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG12	(5<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG14	(6<<4)
> +#define S5PV210_UFCON_UART23_RXTRIG16	(7<<4)
> +
> +#define S5PV210_UFCON_RXTRIGMAX		(7<<4)
> +
>  #define S5PV210_UFSTAT_TXFULL	(1<<24)
>  #define S5PV210_UFSTAT_RXFULL	(1<<8)
>  #define S5PV210_UFSTAT_TXMASK	(255<<16)

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.