[PATCH 0/3 v2] Enable pxa310 usb otg port host mode

[Igor Grinberg]

This patch series introduces the U2D Controller and
U2D ULPI Host driver for PXA310 and enables cm-x300 usb host port2.

This patch series depends on
"Generic ULPI driver extention" patch series,
which have been reviewed at linux-usb mailing list

Igor Grinberg (3):
  [ARM] pxa3xx: Add U2D controller and ULPI driver
  [ARM] usb/host/ohci-pxa27x: enable OHCI over U2DC
  [ARM] pxa/cm-x300: enable USB host port2

 arch/arm/mach-pxa/Kconfig                   |    4 +
 arch/arm/mach-pxa/Makefile                  |    2 +-
 arch/arm/mach-pxa/cm-x300.c                 |   77 ++++++
 arch/arm/mach-pxa/devices.c                 |   28 ++
 arch/arm/mach-pxa/devices.h                 |    1 +
 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h |   35 +++
 arch/arm/mach-pxa/pxa3xx-ulpi.c             |  392 +++++++++++++++++++++++++++
 arch/arm/mach-pxa/pxa3xx.c                  |    2 +-
 drivers/usb/host/ohci-pxa27x.c              |    7 +
 9 files changed, 546 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
 create mode 100644 arch/arm/mach-pxa/pxa3xx-ulpi.c