Pull request mxc
Sascha Hauer
s.hauer at pengutronix.de
Mon Jul 26 05:00:14 EDT 2010
Hi Russell,
Please pull the following patches for 2.6.36.
Sascha
The following changes since commit 815c4163b6c8ebf8152f42b0a5fd015cfdcedc78:
Linux 2.6.35-rc4 (2010-07-04 20:22:50 -0700)
are available in the git repository at:
git://git.pengutronix.de/git/imx/linux-2.6.git for-rmk
Amit Kucheria (2):
arm: mxc: utilise usecount field in clock operations
mxc: Fix pad names for imx51
Baruch Siach (11):
mxc_nand: add support for platform defined partitions
mx25: add platform code for imx-keypad
mx25pdk: add keypad support
mx25: add watchdog clock
mx25pdk: register watchdog device
mx25: add a comment documenting undocumented IPG clocks
mx27: add support for the CSI device
mx25: add support for the CSI device
mx25: add iomux defines for UART4 on KPP pins
mx25: add PWM4 to iomux
mx2_camera: Add soc_camera support for i.MX25/i.MX27
Daniel Mack (3):
ARM: mx3: pcm037: remove unused variable
ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPI
ARM: mx3: mx31lilly: pass mc13783 SPI IRQ pin
Dinh Nguyen (2):
mx5: Add i2c to Freescale MX51 Babbage HW
mx5: Register i2c on Freescale MX51 Babbage HW
Eric Bénard (35):
eukrea_mbimx27-baseboard: fix typo in display name
eukrea_mbimx27-baseboard: add generic-bl and platform-lcd controls
eukrea_mbimx27-baseboard: add timings for DVI output
cpuimx27 and mbimx27: allow fine control of UART4 and SDHC2 usage
mach-cpuimx27: fix QuadUART's IRQ typo in pins'setup
eukrea_mbimx27: fix ADS7846 support
mach-cpuimx27: add USB Host2 and OTG support
mach-cpuimx27: register wdt and w1_master resources
mxcmmc: add card detect through DAT3 possibility
eukrea_mbimx27: use card detect through DAT3 for SDHC1
MX2X: Add Keypad device definition for MX2X arch
eukrea_mbimx27: add support for the keyboard
eukrea_mbimx27: add audio codec
i.MX35: return IPU clock's value for mx3fb
mach-cpuimx27: fix USB_ULPI build warnings
eukrea_mbimx27: fix audio support when SOC is compiled as module
i.MX27: add suspend to RAM support
MX25: put define for OTG base address in right include
plat-mxc/ehci.c: add i.MX25 support
i.MX25: fix get_rate_otg to return the correct value
i.MX25: fix EHCI support
i.MX25: fix USB gadget support
i.MX25: add AUDMUX and SSI support
i.MX25: add cpuimx25 module and its baseboard
i.MX35: add cpuimx35 support and its baseboard
mxcmmc: convert to pm_ops and enable/disable clock
imx25: fix low level debug
imxfb: add pwmr controlled backlight support
eukrea_mbimx27-baseboard: fix compile when CONFIG_SPI_IMX is disabled
i.MX51: handle IRQ for gpio 16..31
iomux-mx51: add 4 pin definitions
mbimxsd baseboards : remove unecessary include
Fix KConfig warning
eukrea-baseboards: merge includes in one file
i.MX51: add support for cpuimx51 module and its baseboard
Fabio Estevam (1):
mx31_3ds: Handle USB OTG GPIO Errors
Jason Wang (9):
mx51/iomux: Fix mux mode and input path for two pads
mx51/iomux: add UART and GPIO pad definitions for imx51_3ds board
mxc/iomux: add GPIO bank offset for iomux v3 platforms
mxc: add common debug board for 3-stack platforms
mx31_3ds: revert 3ds debug board relate code
mx51_3ds: Add support for the imx51 3-stack board
mx51: add imx_keypad device definition for mx51 platforms
mx51_3ds: add keypad support on 3ds platform
imx: move gpio init after to irq init
Luotao Fu (2):
pca100: add framebuffer device support and TFT
pca100: clean up GPIO pin multiplexing
Marc Kleine-Budde (5):
mx25: add flexcan address and interrupt definition
mx35: adjust flexcan clock definition
mx35: add flexcan address
imx: dynamically register flexcan devices for mx25 and mx35
pcm043: register flexcan device
Rogerio Pimentel (1):
mx27_3ds: add support for the keypad
Sascha Hauer (2):
mxc_nand: Fix OOB handling
mx25: flexcan clock support
Uwe Kleine-König (60):
ARM: mx3: rename mach-mx35pdk.c to mach-mx35_3ds.c matching its arch number
ARM: mx25: rename mach-mx25pdk.c to mach-mx25_3ds.c matching its arch number
ARM: mx1: don't use deprecated symbol names
ARM: mx1/scb9328: fix type of uart1_mxc_exit to make compiler happy
ARM: mx2/mx27_3ds: document alternative names and remove empty header
ARM: imx: remove empty and unused board headers
ARM: mx3/kzm_arm11_01: fold board header in its only user
ARM: mx2/mx21ads: fold board header in its only user
ARM: mx2/mx27ads: fold board header in its only user
ARM: mx3/qong: get rid of nearly empty header
ARM: mx3/mx31_3ds: fold board header in its only user
ARM: mx3/mx31ads: fold board header in its only user
ARM: mxc: grammar fix
ARM: imx: rename mach dir for mx21 and mx27 to mach-imx
ARM: imx/mx1: fold crm_regs.h into its only consumer
ARM: imx: get rid of mxc_gpio_init
ARM: imx: fold serial.c into devices.c
ARM: imx1: rename imx_csi_device to match its .name
ARM: imx1: rename imx_i2c_device to follow a common naming scheme
ARM: imx1: rename imx_uart[12]_device to follow a common naming scheme
ARM: imx: rename mxc_uart_devicex to follow a common naming scheme
ARM: imx: move mx1 support to mach-imx
ARM: imx: Kconfig: use an if block instead of a depend for many symbols
ARM: imx: prepare deprecating ARCH_MX1, MACH_MX2, MACH_MX21 and MACH_MX27
ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2
ARM: imx: new helper function imx_add_platform_device
MTD: mxc_nand: make bit fields unsigned to please sparse
ARM: imx: remove paragraphs with old address of the FSF
ARM: mx25: remove paragraphs with old address of the FSF
ARM: mx3: remove paragraphs with old address of the FSF
ARM: mxc91231: remove paragraphs with old address of the FSF
ARM: mxc: remove paragraphs with old address of the FSF
ARM: imx: Change the way nand devices are registered (generic part)
ARM: imx: Change the way nand devices are registered (imx21)
ARM: imx: Change the way nand devices are registered (imx25)
ARM: imx: Change the way nand devices are registered (imx27)
ARM: imx: Change the way nand devices are registered (imx31)
ARM: imx: Change the way nand devices are registered (imx35)
ARM: imx: dynamically register imx-i2c devices (generic part)
ARM: imx: dynamically register imx-i2c devices (imx1)
ARM: imx: dynamically register imx-i2c devices (imx21)
ARM: imx: dynamically register imx-i2c devices (imx25)
ARM: imx: dynamically register imx-i2c devices (imx27)
ARM: imx: dynamically register imx-i2c devices (imx31)
ARM: imx: dynamically register imx-i2c devices (imx35)
ARM: imx: dynamically register spi_imx devices (generic part)
ARM: imx: dynamically register spi_imx devices (imx21)
ARM: imx: dynamically register spi_imx devices (imx25)
ARM: imx: dynamically register spi_imx devices (imx27)
ARM: imx: dynamically register spi_imx devices (imx31)
ARM: imx: dynamically register spi_imx devices (imx35)
ARM: imx: dynamically register imx-uart devices (generic part)
ARM: imx: dynamically register imx-uart devices (imx1)
ARM: imx: dynamically register imx-uart devices (imx21)
ARM: imx: dynamically register imx-uart devices (imx25)
ARM: imx: dynamically register imx-uart devices (imx27)
ARM: imx: dynamically register imx-uart devices (imx31)
ARM: imx: dynamically register imx-uart devices (imx35)
ARM: mx3: complement uart init routine with an exit routine
Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 into HEAD
Wolfram Sang (1):
pcm037/pcm043/pca100: fix ULPI-related build warnings
arch/arm/Makefile | 4 +-
arch/arm/mach-imx/Kconfig | 193 +++
arch/arm/{mach-mx2 => mach-imx}/Makefile | 18 +-
arch/arm/{mach-mx2 => mach-imx}/Makefile.boot | 4 +
.../{mach-mx1/clock.c => mach-imx/clock-imx1.c} | 50 +-
.../clock_imx21.c => mach-imx/clock-imx21.c} | 0
.../clock_imx27.c => mach-imx/clock-imx27.c} | 2 +-
.../{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} | 0
arch/arm/mach-imx/devices-imx1.h | 18 +
arch/arm/mach-imx/devices-imx21.h | 30 +
arch/arm/mach-imx/devices-imx27.h | 38 +
arch/arm/{mach-mx2 => mach-imx}/devices.c | 296 +++--
arch/arm/{mach-mx2 => mach-imx}/devices.h | 32 +-
.../{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} | 4 +-
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 392 +++++
arch/arm/mach-imx/include/mach/dma-mx1-mx2.h | 10 +
.../include/mach/dma-v1.h} | 10 +-
arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c | 122 ++-
arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c | 11 +-
arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c | 34 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c | 58 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c | 40 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c | 76 +-
arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c | 36 +-
arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c | 114 ++-
arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c | 33 +-
arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c | 21 +-
.../arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} | 23 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c | 5 +-
arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c | 5 +-
.../ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} | 0
.../mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} | 0
arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c | 0
arch/arm/mach-imx/pm-imx27.c | 46 +
arch/arm/mach-mx1/Kconfig | 19 -
arch/arm/mach-mx1/Makefile | 15 -
arch/arm/mach-mx1/Makefile.boot | 4 -
arch/arm/mach-mx1/crm_regs.h | 55 -
arch/arm/mach-mx1/devices.c | 242 ----
arch/arm/mach-mx1/devices.h | 7 -
arch/arm/mach-mx2/Kconfig | 116 --
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c | 249 ----
arch/arm/mach-mx2/serial.c | 141 --
arch/arm/mach-mx25/Kconfig | 23 +
arch/arm/mach-mx25/Makefile | 4 +-
arch/arm/mach-mx25/clock.c | 70 +-
arch/arm/mach-mx25/devices-imx25.h | 43 +
arch/arm/mach-mx25/devices.c | 313 ++---
arch/arm/mach-mx25/devices.h | 16 +-
arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c | 260 ++++
arch/arm/mach-mx25/mach-cpuimx25.c | 173 +++
.../mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} | 58 +-
arch/arm/mach-mx25/mm.c | 7 +-
arch/arm/mach-mx3/Kconfig | 53 +
arch/arm/mach-mx3/Makefile | 4 +-
arch/arm/mach-mx3/clock-imx35.c | 6 +-
arch/arm/mach-mx3/devices-imx31.h | 38 +
arch/arm/mach-mx3/devices-imx35.h | 37 +
arch/arm/mach-mx3/devices.c | 247 +----
arch/arm/mach-mx3/devices.h | 13 -
arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c | 263 ++++
arch/arm/mach-mx3/mach-armadillo5x0.c | 17 +-
arch/arm/mach-mx3/mach-cpuimx35.c | 227 +++
arch/arm/mach-mx3/mach-kzm_arm11_01.c | 31 +-
arch/arm/mach-mx3/mach-mx31_3ds.c | 256 +---
arch/arm/mach-mx3/mach-mx31ads.c | 55 +-
arch/arm/mach-mx3/mach-mx31lilly.c | 48 +-
arch/arm/mach-mx3/mach-mx31lite.c | 17 +-
arch/arm/mach-mx3/mach-mx31moboard.c | 50 +-
.../mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} | 16 +-
arch/arm/mach-mx3/mach-pcm037.c | 34 +-
arch/arm/mach-mx3/mach-pcm037_eet.c | 7 +-
arch/arm/mach-mx3/mach-pcm043.c | 31 +-
arch/arm/mach-mx3/mach-qong.c | 16 +-
arch/arm/mach-mx3/mm.c | 7 +-
arch/arm/mach-mx3/mx31lilly-db.c | 14 +-
arch/arm/mach-mx3/mx31lite-db.c | 15 +-
arch/arm/mach-mx3/mx31moboard-devboard.c | 10 +-
arch/arm/mach-mx3/mx31moboard-marxbot.c | 4 -
arch/arm/mach-mx3/mx31moboard-smartbot.c | 11 +-
arch/arm/mach-mx5/Kconfig | 27 +
arch/arm/mach-mx5/Makefile | 4 +-
arch/arm/mach-mx5/board-cpuimx51.c | 293 ++++
arch/arm/mach-mx5/board-mx51_3ds.c | 164 +++
arch/arm/mach-mx5/board-mx51_babbage.c | 28 +-
arch/arm/mach-mx5/clock-mx51.c | 16 +
arch/arm/mach-mx5/devices.c | 83 ++-
arch/arm/mach-mx5/devices.h | 4 +
arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c | 200 +++
arch/arm/mach-mx5/mm.c | 3 +
arch/arm/mach-mxc91231/crm_regs.h | 5 -
arch/arm/mach-mxc91231/devices.c | 2 +-
arch/arm/mach-mxc91231/mm.c | 8 +-
arch/arm/plat-mxc/3ds_debugboard.c | 202 +++
arch/arm/plat-mxc/Kconfig | 22 +-
arch/arm/plat-mxc/Makefile | 5 +-
arch/arm/plat-mxc/audmux-v1.c | 4 -
arch/arm/plat-mxc/audmux-v2.c | 19 +-
arch/arm/plat-mxc/clock.c | 37 +-
arch/arm/plat-mxc/devices.c | 33 +
arch/arm/plat-mxc/devices/Kconfig | 15 +
arch/arm/plat-mxc/devices/Makefile | 8 +
arch/arm/plat-mxc/devices/platform-flexcan.c | 30 +
arch/arm/plat-mxc/devices/platform-imx-i2c.c | 29 +
arch/arm/plat-mxc/devices/platform-imx-uart.c | 60 +
arch/arm/plat-mxc/devices/platform-mxc_nand.c | 44 +
arch/arm/plat-mxc/devices/platform-spi_imx.c | 30 +
arch/arm/plat-mxc/ehci.c | 50 +-
arch/arm/plat-mxc/gpio.c | 6 +
arch/arm/plat-mxc/include/mach/3ds_debugboard.h | 18 +
.../arm/plat-mxc/include/mach/board-armadillo5x0.h | 15 -
arch/arm/plat-mxc/include/mach/board-kzmarm11.h | 39 -
arch/arm/plat-mxc/include/mach/board-mx21ads.h | 52 -
arch/arm/plat-mxc/include/mach/board-mx27ads.h | 344 -----
arch/arm/plat-mxc/include/mach/board-mx27lite.h | 14 -
arch/arm/plat-mxc/include/mach/board-mx27pdk.h | 14 -
arch/arm/plat-mxc/include/mach/board-mx31_3ds.h | 59 -
arch/arm/plat-mxc/include/mach/board-mx31ads.h | 117 --
arch/arm/plat-mxc/include/mach/board-mx31lilly.h | 2 +-
arch/arm/plat-mxc/include/mach/board-mx31lite.h | 2 +-
arch/arm/plat-mxc/include/mach/board-mx31moboard.h | 2 +-
arch/arm/plat-mxc/include/mach/board-mx35pdk.h | 22 -
arch/arm/plat-mxc/include/mach/board-pcm037.h | 22 -
arch/arm/plat-mxc/include/mach/board-pcm038.h | 2 +-
arch/arm/plat-mxc/include/mach/board-pcm043.h | 22 -
arch/arm/plat-mxc/include/mach/board-qong.h | 17 -
arch/arm/plat-mxc/include/mach/debug-macro.S | 4 +-
arch/arm/plat-mxc/include/mach/devices-common.h | 60 +
...board-eukrea_cpuimx27.h => eukrea-baseboards.h} | 19 +-
arch/arm/plat-mxc/include/mach/gpio.h | 1 +
arch/arm/plat-mxc/include/mach/iomux-mx25.h | 28 +-
arch/arm/plat-mxc/include/mach/iomux-mx51.h | 559 ++++----
arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 4 -
arch/arm/plat-mxc/include/mach/iomux-v3.h | 15 +
arch/arm/plat-mxc/include/mach/memory.h | 4 +-
arch/arm/plat-mxc/include/mach/mmc.h | 3 +
arch/arm/plat-mxc/include/mach/mx1.h | 28 +-
arch/arm/plat-mxc/include/mach/mx25.h | 50 +-
arch/arm/plat-mxc/include/mach/mx27.h | 4 +-
arch/arm/plat-mxc/include/mach/mx2_cam.h | 46 +
arch/arm/plat-mxc/include/mach/mx31.h | 4 +-
arch/arm/plat-mxc/include/mach/mx35.h | 6 +-
arch/arm/plat-mxc/include/mach/mx3_camera.h | 4 -
arch/arm/plat-mxc/include/mach/mxc91231.h | 4 -
arch/arm/plat-mxc/include/mach/mxc_nand.h | 10 +-
arch/arm/plat-mxc/include/mach/system.h | 4 -
arch/arm/plat-mxc/include/mach/timex.h | 4 -
arch/arm/plat-mxc/include/mach/uncompress.h | 4 -
arch/arm/plat-mxc/include/mach/vmalloc.h | 4 -
arch/arm/plat-mxc/irq.c | 3 -
arch/arm/plat-mxc/system.c | 4 -
arch/arm/plat-mxc/tzic.c | 2 -
drivers/media/video/Kconfig | 13 +
drivers/media/video/Makefile | 1 +
drivers/media/video/mx2_camera.c | 1513 ++++++++++++++++++++
drivers/mmc/host/mxcmmc.c | 48 +-
drivers/mtd/nand/mxc_nand.c | 33 +-
drivers/usb/gadget/fsl_mxc_udc.c | 2 +-
drivers/usb/host/ehci-mxc.c | 2 +-
drivers/video/imxfb.c | 72 +-
160 files changed, 6547 insertions(+), 3276 deletions(-)
create mode 100644 arch/arm/mach-imx/Kconfig
rename arch/arm/{mach-mx2 => mach-imx}/Makefile (55%)
rename arch/arm/{mach-mx2 => mach-imx}/Makefile.boot (67%)
rename arch/arm/{mach-mx1/clock.c => mach-imx/clock-imx1.c} (90%)
rename arch/arm/{mach-mx2/clock_imx21.c => mach-imx/clock-imx21.c} (100%)
rename arch/arm/{mach-mx2/clock_imx27.c => mach-imx/clock-imx27.c} (99%)
rename arch/arm/{mach-mx2/cpu_imx27.c => mach-imx/cpu-imx27.c} (100%)
create mode 100644 arch/arm/mach-imx/devices-imx1.h
create mode 100644 arch/arm/mach-imx/devices-imx21.h
create mode 100644 arch/arm/mach-imx/devices-imx27.h
rename arch/arm/{mach-mx2 => mach-imx}/devices.c (67%)
rename arch/arm/{mach-mx2 => mach-imx}/devices.h (54%)
rename arch/arm/{plat-mxc/dma-mx1-mx2.c => mach-imx/dma-v1.c} (99%)
create mode 100644 arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
create mode 100644 arch/arm/mach-imx/include/mach/dma-mx1-mx2.h
rename arch/arm/{plat-mxc/include/mach/dma-mx1-mx2.h => mach-imx/include/mach/dma-v1.h} (93%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-cpuimx27.c (66%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-imx27lite.c (86%)
rename arch/arm/{mach-mx1 => mach-imx}/mach-mx1ads.c (81%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-mx21ads.c (77%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27_3ds.c (74%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-mx27ads.c (82%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-mxt_td60.c (86%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-pca100.c (80%)
rename arch/arm/{mach-mx2 => mach-imx}/mach-pcm038.c (91%)
rename arch/arm/{mach-mx1 => mach-imx}/mach-scb9328.c (89%)
rename arch/arm/{mach-mx1/generic.c => mach-imx/mm-imx1.c} (68%)
rename arch/arm/{mach-mx2 => mach-imx}/mm-imx21.c (95%)
rename arch/arm/{mach-mx2 => mach-imx}/mm-imx27.c (95%)
rename arch/arm/{mach-mx1/ksym_mx1.c => mach-imx/mx1-camera-fiq-ksym.c} (100%)
rename arch/arm/{mach-mx1/mx1_camera_fiq.S => mach-imx/mx1-camera-fiq.S} (100%)
rename arch/arm/{mach-mx2 => mach-imx}/pcm970-baseboard.c (100%)
create mode 100644 arch/arm/mach-imx/pm-imx27.c
delete mode 100644 arch/arm/mach-mx1/Kconfig
delete mode 100644 arch/arm/mach-mx1/Makefile
delete mode 100644 arch/arm/mach-mx1/Makefile.boot
delete mode 100644 arch/arm/mach-mx1/crm_regs.h
delete mode 100644 arch/arm/mach-mx1/devices.c
delete mode 100644 arch/arm/mach-mx1/devices.h
delete mode 100644 arch/arm/mach-mx2/Kconfig
delete mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
delete mode 100644 arch/arm/mach-mx2/serial.c
create mode 100644 arch/arm/mach-mx25/devices-imx25.h
create mode 100644 arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
create mode 100644 arch/arm/mach-mx25/mach-cpuimx25.c
rename arch/arm/mach-mx25/{mach-mx25pdk.c => mach-mx25_3ds.c} (76%)
create mode 100644 arch/arm/mach-mx3/devices-imx31.h
create mode 100644 arch/arm/mach-mx3/devices-imx35.h
create mode 100644 arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
create mode 100644 arch/arm/mach-mx3/mach-cpuimx35.c
rename arch/arm/mach-mx3/{mach-mx35pdk.c => mach-mx35_3ds.c} (89%)
create mode 100644 arch/arm/mach-mx5/board-cpuimx51.c
create mode 100644 arch/arm/mach-mx5/board-mx51_3ds.c
create mode 100644 arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
create mode 100644 arch/arm/plat-mxc/3ds_debugboard.c
create mode 100644 arch/arm/plat-mxc/devices/Kconfig
create mode 100644 arch/arm/plat-mxc/devices/Makefile
create mode 100644 arch/arm/plat-mxc/devices/platform-flexcan.c
create mode 100644 arch/arm/plat-mxc/devices/platform-imx-i2c.c
create mode 100644 arch/arm/plat-mxc/devices/platform-imx-uart.c
create mode 100644 arch/arm/plat-mxc/devices/platform-mxc_nand.c
create mode 100644 arch/arm/plat-mxc/devices/platform-spi_imx.c
create mode 100644 arch/arm/plat-mxc/include/mach/3ds_debugboard.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-kzmarm11.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx21ads.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27ads.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27lite.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx27pdk.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31_3ds.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx31ads.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-mx35pdk.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm037.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-pcm043.h
delete mode 100644 arch/arm/plat-mxc/include/mach/board-qong.h
create mode 100644 arch/arm/plat-mxc/include/mach/devices-common.h
rename arch/arm/plat-mxc/include/mach/{board-eukrea_cpuimx27.h => eukrea-baseboards.h} (64%)
create mode 100644 arch/arm/plat-mxc/include/mach/mx2_cam.h
create mode 100644 drivers/media/video/mx2_camera.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list