[PATCH v3 5/8] ARM: s5pv210: enable FIMC on Aquila

[Kukjin Kim]

Sylwester Nawrocki wrote:
> 
> Add support for FIMC on Samsung Aquila board.
> 
> Signed-off-by: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> ---
>  arch/arm/mach-s5pv210/Kconfig       |    4 ++++
>  arch/arm/mach-s5pv210/mach-aquila.c |    7 +++++++
>  2 files changed, 11 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 039ba8c..b81b91b 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -58,9 +58,13 @@ menu "S5PC110 Machines"
>  config MACH_AQUILA
>  	bool "Aquila"
>  	select CPU_S5PV210
> +	select COMMON_AQUILA_GONI

...

>  	select ARCH_SPARSEMEM_ENABLE
>  	select S5PV210_SETUP_FB_24BPP
>  	select S3C_DEV_FB
> +	select S5P_DEV_FIMC0
> +	select S5P_DEV_FIMC1
> +	select S5P_DEV_FIMC2
>  	select S5PC110_DEV_ONENAND
>  	help
>  	  Machine support for the Samsung Aquila target based on S5PC110
> SoC
> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c
b/arch/arm/mach-s5pv210/mach-
> aquila.c
> index 0992618..7528514 100644
> --- a/arch/arm/mach-s5pv210/mach-aquila.c
> +++ b/arch/arm/mach-s5pv210/mach-aquila.c
> @@ -35,6 +35,9 @@
>  #include <plat/devs.h>
>  #include <plat/cpu.h>
>  #include <plat/fb.h>
> +#include <plat/fimc.h>
> +
> +#include "common-aquila-goni.h"

Hmm...please refer to my another comment.

> 
>  /* Following are default values for UCON, ULCON and UFCON UART registers
*/
>  #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
> @@ -445,6 +448,9 @@ static struct platform_device *aquila_devices[]
__initdata =
> {
>  	&aquila_device_gpiokeys,
>  	&s3c_device_fb,
>  	&s5pc110_device_onenand,
> +	&s5p_device_fimc0,
> +	&s5p_device_fimc1,
> +	&s5p_device_fimc2,
>  };
> 
>  static void __init aquila_map_io(void)
> @@ -465,6 +471,7 @@ static void __init aquila_machine_init(void)
>  	s3c_fb_set_platdata(&aquila_lcd_pdata);
> 
>  	platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
> +	s5pv210_common_fimc_clk_init();

Hmm...really need this fimc_clk_init here not driver?

>  }
> 
>  MACHINE_START(AQUILA, "Aquila")
> --


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.