[PATCH v2 5/8] ARM: S5PV310: Add Timer support
김상범
sbkim73 at samsung.com
Mon Jul 26 00:07:25 EDT 2010
Hi Kyungmin,
>On Fri, Jul 16, 2010 at 5:58 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
>> From: Changhwan Youn <chaos.youn at samsung.com>
>>
>> This patch adds timer support for S5PV310.
>> Until now, all S5P SoCs use CONFIG_ARCH_USES_GETTIMEOFFSET macro as a
>default
>> configuration. Instead, S5PV310 implements clocksource and
>clock_event_device
>> to support the high resolution timer and tickless system.
>>
>> Signed-off-by: Changhwan Youn <chaos.youn at samsung.com>
>> Signed-off-by: Hyuk Lee <hyuk1.lee at samsung.com>
>> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
>> ---
>> arch/arm/mach-s5pv310/include/mach/pwm-clock.h | 70 ++++++
>> arch/arm/mach-s5pv310/localtimer.c | 25 ++
>> arch/arm/mach-s5pv310/time.c | 287
>++++++++++++++++++++++++
>> arch/arm/plat-s5p/include/plat/s5pv310.h | 1 +
>> arch/arm/plat-samsung/Makefile | 2 +-
>> 5 files changed, 384 insertions(+), 1 deletions(-)
>> create mode 100644 arch/arm/mach-s5pv310/include/mach/pwm-clock.h
>> create mode 100644 arch/arm/mach-s5pv310/localtimer.c
>> create mode 100644 arch/arm/mach-s5pv310/time.c
>>
>> diff --git a/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
>b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
>> new file mode 100644
>> index 0000000..7e6da27
>> --- /dev/null
>> +++ b/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
>> @@ -0,0 +1,70 @@
>> +/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
>> + *
>> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com/
>> + *
>> + * Copyright 2008 Openmoko, Inc.
>> + * Copyright 2008 Simtec Electronics
>> + * Ben Dooks <ben at simtec.co.uk>
>> + * http://armlinux.simtec.co.uk/
>> + *
>> + * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
>> + *
>> + * S5PV310 - pwm clock and timer support
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#ifndef __ASM_ARCH_PWMCLK_H
>> +#define __ASM_ARCH_PWMCLK_H __FILE__
>> +
>> +/**
>> + * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
>> + * @tcfg: The timer TCFG1 register bits shifted down to 0.
>> + *
>> + * Return true if the given configuration from TCFG1 is a TCLK instead
>> + * any of the TDIV clocks.
>> + */
>> +static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
>> +{
>> + return tcfg == S3C64XX_TCFG1_MUX_TCLK;
>> +}
>> +
>> +/**
>> + * tcfg_to_divisor() - convert tcfg1 setting to a divisor
>> + * @tcfg1: The tcfg1 setting, shifted down.
>> + *
>> + * Get the divisor value for the given tcfg1 setting. We assume the
>> + * caller has already checked to see if this is not a TCLK source.
>> + */
>> +static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
>> +{
>> + return 1 << tcfg1;
>> +}
>> +
>> +/**
>> + * pwm_tdiv_has_div1() - does the tdiv setting have a /1
>> + *
>> + * Return true if we have a /1 in the tdiv setting.
>> + */
>> +static inline unsigned int pwm_tdiv_has_div1(void)
>> +{
>> + return 1;
>> +}
>> +
>> +/**
>> + * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
>> + * @div: The divisor to calculate the bit information for.
>> + *
>> + * Turn a divisor into the necessary bit field for TCFG1.
>> + */
>> +static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
>> +{
>> + return ilog2(div);
>> +}
>> +
>> +#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
>> +
>> +#endif /* __ASM_ARCH_PWMCLK_H */
>> diff --git a/arch/arm/mach-s5pv310/localtimer.c b/arch/arm/mach-
>s5pv310/localtimer.c
>> new file mode 100644
>> index 0000000..2784036
>> --- /dev/null
>> +++ b/arch/arm/mach-s5pv310/localtimer.c
>> @@ -0,0 +1,25 @@
>> +/* linux/arch/arm/mach-s5pv310/localtimer.c
>> + *
>> + * Cloned from linux/arch/arm/mach-realview/localtimer.c
>> + *
>> + * Copyright (C) 2002 ARM Ltd.
>> + * All Rights Reserved
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <linux/clockchips.h>
>> +
>> +#include <asm/irq.h>
>> +#include <asm/localtimer.h>
>> +
>> +/*
>> + * Setup the local clock events for a CPU.
>> + */
>> +void __cpuinit local_timer_setup(struct clock_event_device *evt)
>> +{
>> + evt->irq = IRQ_LOCALTIMER;
>> + twd_timer_setup(evt);
>> +}
>> diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c
>> new file mode 100644
>> index 0000000..64accf8
>> --- /dev/null
>> +++ b/arch/arm/mach-s5pv310/time.c
>> @@ -0,0 +1,287 @@
>> +/* linux/arch/arm/mach-s5pv310/time.c
>> + *
>> + * Copyright (c) 2010 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * S5PV310 (and compatible) HRT support
>> + * PWM 2/4 is used for this feature
>
>Please make it configurable, now PWM 2 is used for I2C pin in mobile
>hardware.
>It seems to smdk specific file.
>
>Why don't use the systimer?
>
>Thank you,
>Kyungmin Park
>
In current implementation, pwm 2 is for clock source and
arm private timers are used for clock event device.
Pwm 4 is used only for calibrating arm private timers.
because arm private timers are calibrated using Jiffies and that means
we need other timer for clock event before the arm private timers are registered to the kernel.
According to your comment, it seems that pwm 4 is more appropriate for clock source
because pwm 4 doesn't have external output function through GPIO port.
With this modification, pwm 2 will be used for clock event device during early boot time
and can be used for other purpose after system boot time.
regards,
Sangbeom Kim
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> +*/
>> +
>> +#include <linux/sched.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/irq.h>
>> +#include <linux/err.h>
>> +#include <linux/clk.h>
>> +#include <linux/clockchips.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include <asm/smp_twd.h>
>> +
>> +#include <mach/map.h>
>> +#include <plat/regs-timer.h>
>> +#include <asm/mach/time.h>
>> +
>> +static unsigned long clock_count_per_tick;
>> +
>> +static struct clk *tin2;
>> +static struct clk *tin4;
>> +static struct clk *tdiv2;
>> +static struct clk *tdiv4;
>> +static struct clk *timerclk;
>> +
>> +static void s5pv310_pwm_stop(unsigned int pwm_id)
>> +{
>> + unsigned long tcon;
>> +
>> + tcon = __raw_readl(S3C2410_TCON);
>> +
>> + switch (pwm_id) {
>> + case 2:
>> + tcon &= ~S3C2410_TCON_T2START;
>> + break;
>> + case 4:
>> + tcon &= ~S3C2410_TCON_T4START;
>> + break;
>> + default:
>> + break;
>> + }
>> + __raw_writel(tcon, S3C2410_TCON);
>> +}
>> +
>> +static void s5pv310_pwm_init(unsigned int pwm_id, unsigned long tcnt)
>> +{
>> + unsigned long tcon;
>> +
>> + tcon = __raw_readl(S3C2410_TCON);
>> +
>> + /* timers reload after counting zero, so reduce the count by 1 */
>> + tcnt--;
>> +
>> + /* ensure timer is stopped... */
>> + switch (pwm_id) {
>> + case 2:
>> + tcon &= ~(0xf<<12);
>> + tcon |= S3C2410_TCON_T2MANUALUPD;
>> +
>> + __raw_writel(tcnt, S3C2410_TCNTB(2));
>> + __raw_writel(tcnt, S3C2410_TCMPB(2));
>> + __raw_writel(tcon, S3C2410_TCON);
>> +
>> + break;
>> + case 4:
>> + tcon &= ~(7<<20);
>> + tcon |= S3C2410_TCON_T4MANUALUPD;
>> +
>> + __raw_writel(tcnt, S3C2410_TCNTB(4));
>> + __raw_writel(tcnt, S3C2410_TCMPB(4));
>> + __raw_writel(tcon, S3C2410_TCON);
>> +
>> + break;
>> + default:
>> + break;
>> + }
>> +}
>> +
>> +static inline void s5pv310_pwm_start(unsigned int pwm_id, bool periodic)
>> +{
>> + unsigned long tcon;
>> +
>> + tcon = __raw_readl(S3C2410_TCON);
>> +
>> + switch (pwm_id) {
>> + case 2:
>> + tcon |= S3C2410_TCON_T2START;
>> + tcon &= ~S3C2410_TCON_T2MANUALUPD;
>> +
>> + if (periodic)
>> + tcon |= S3C2410_TCON_T2RELOAD;
>> + else
>> + tcon &= ~S3C2410_TCON_T2RELOAD;
>> + break;
>> + case 4:
>> + tcon |= S3C2410_TCON_T4START;
>> + tcon &= ~S3C2410_TCON_T4MANUALUPD;
>> +
>> + if (periodic)
>> + tcon |= S3C2410_TCON_T4RELOAD;
>> + else
>> + tcon &= ~S3C2410_TCON_T4RELOAD;
>> + break;
>> + default:
>> + break;
>> + }
>> + __raw_writel(tcon, S3C2410_TCON);
>> +}
>> +
>> +static int s5pv310_pwm_set_next_event(unsigned long cycles,
>> + struct clock_event_device *evt)
>> +{
>> + s5pv310_pwm_init(4, cycles);
>> + s5pv310_pwm_start(4, 0);
>> + return 0;
>> +}
>> +
>> +static void s5pv310_pwm_set_mode(enum clock_event_mode mode,
>> + struct clock_event_device *evt)
>> +{
>> + s5pv310_pwm_stop(4);
>> +
>> + switch (mode) {
>> + case CLOCK_EVT_MODE_PERIODIC:
>> + s5pv310_pwm_init(4, clock_count_per_tick);
>> + s5pv310_pwm_start(4, 1);
>> + break;
>> + case CLOCK_EVT_MODE_ONESHOT:
>> + break;
>> + case CLOCK_EVT_MODE_UNUSED:
>> + case CLOCK_EVT_MODE_SHUTDOWN:
>> + case CLOCK_EVT_MODE_RESUME:
>> + break;
>> + }
>> +}
>> +
>> +static struct clock_event_device pwm_event_device = {
>> + .name = "pwm_timer4",
>> + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
>> + .rating = 200,
>> + .shift = 32,
>> + .set_next_event = s5pv310_pwm_set_next_event,
>> + .set_mode = s5pv310_pwm_set_mode,
>> +};
>> +
>> +irqreturn_t s5pv310_clock_event_isr(int irq, void *dev_id)
>> +{
>> + struct clock_event_device *evt = &pwm_event_device;
>> +
>> + evt->event_handler(evt);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static struct irqaction s5pv310_clock_event_irq = {
>> + .name = "pwm_timer4_irq",
>> + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
>> + .handler = s5pv310_clock_event_isr,
>> +};
>> +
>> +static void __init s5pv310_clockevent_init(void)
>> +{
>> + unsigned long pclk;
>> + unsigned long clock_rate;
>> + struct clk *tscaler;
>> +
>> + pclk = clk_get_rate(timerclk);
>> +
>> + /* configure clock tick */
>> +
>> + tscaler = clk_get_parent(tdiv4);
>> +
>> + clk_set_rate(tscaler, pclk / 2);
>> + clk_set_rate(tdiv4, pclk / 2);
>> + clk_set_parent(tin4, tdiv4);
>> +
>> + clock_rate = clk_get_rate(tin4);
>> +
>> + clock_count_per_tick = clock_rate / HZ;
>> +
>> + pwm_event_device.mult =
>> + div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift);
>> + pwm_event_device.max_delta_ns =
>> + clockevent_delta2ns(-1, &pwm_event_device);
>> + pwm_event_device.min_delta_ns =
>> + clockevent_delta2ns(1, &pwm_event_device);
>> +
>> + pwm_event_device.cpumask = cpumask_of(0);
>> + clockevents_register_device(&pwm_event_device);
>> +
>> + setup_irq(IRQ_TIMER4, &s5pv310_clock_event_irq);
>> +}
>> +
>> +static cycle_t s5pv310_pwm2_read(struct clocksource *cs)
>> +{
>> + return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x2c));
>> +}
>> +
>> +struct clocksource pwm_clocksource = {
>> + .name = "pwm_timer2",
>> + .rating = 250,
>> + .read = s5pv310_pwm2_read,
>> + .mask = CLOCKSOURCE_MASK(32),
>> + .shift = 20,
>> + .flags = CLOCK_SOURCE_IS_CONTINUOUS ,
>> +};
>> +
>> +static void __init s5pv310_clocksource_init(void)
>> +{
>> + unsigned long pclk;
>> + unsigned long clock_rate;
>> +
>> + pclk = clk_get_rate(timerclk);
>> +
>> + clk_set_rate(tdiv2, pclk / 2);
>> + clk_set_parent(tin2, tdiv2);
>> +
>> + clock_rate = clk_get_rate(tin2);
>> +
>> + s5pv310_pwm_init(2, ~0);
>> + s5pv310_pwm_start(2, 1);
>> +
>> + pwm_clocksource.mult =
>> + clocksource_khz2mult(clock_rate/1000,
>pwm_clocksource.shift);
>> +
>> + if (clocksource_register(&pwm_clocksource))
>> + panic("%s: can't register clocksource\n",
>pwm_clocksource.name);
>> +}
>> +
>> +static void __init s5pv310_timer_resources(void)
>> +{
>> + struct platform_device tmpdev;
>> +
>> + tmpdev.dev.bus = &platform_bus_type;
>> +
>> + timerclk = clk_get(NULL, "timers");
>> + if (IS_ERR(timerclk))
>> + panic("failed to get timers clock for system timer");
>> +
>> + clk_enable(timerclk);
>> +
>> + tmpdev.id = 2;
>> + tin2 = clk_get(&tmpdev.dev, "pwm-tin");
>> + if (IS_ERR(tin2))
>> + panic("failed to get pwm-tin2 clock for system timer");
>> +
>> + tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv");
>> + if (IS_ERR(tdiv2))
>> + panic("failed to get pwm-tdiv2 clock for system timer");
>> + clk_enable(tin2);
>> +
>> + tmpdev.id = 4;
>> + tin4 = clk_get(&tmpdev.dev, "pwm-tin");
>> + if (IS_ERR(tin4))
>> + panic("failed to get pwm-tin4 clock for system timer");
>> +
>> + tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv");
>> + if (IS_ERR(tdiv4))
>> + panic("failed to get pwm-tdiv4 clock for system timer");
>> +
>> + clk_enable(tin4);
>> +}
>> +
>> +static void __init s5pv310_timer_init(void)
>> +{
>> +#ifdef CONFIG_LOCAL_TIMERS
>> + twd_base = S5P_VA_TWD;
>> +#endif
>> +
>> + s5pv310_timer_resources();
>> + s5pv310_clockevent_init();
>> + s5pv310_clocksource_init();
>> +}
>> +
>> +struct sys_timer s5pv310_timer = {
>> + .init = s5pv310_timer_init,
>> +};
>> diff --git a/arch/arm/plat-s5p/include/plat/s5pv310.h b/arch/arm/plat-
>s5p/include/plat/s5pv310.h
>> index d2f05e1..769c991 100644
>> --- a/arch/arm/plat-s5p/include/plat/s5pv310.h
>> +++ b/arch/arm/plat-s5p/include/plat/s5pv310.h
>> @@ -22,6 +22,7 @@ extern int s5pv310_init(void);
>> extern void s5pv310_init_irq(void);
>> extern void s5pv310_map_io(void);
>> extern void s5pv310_init_clocks(int xtal);
>> +extern struct sys_timer s5pv310_timer;
>>
>> #define s5pv310_init_uarts s5pv310_common_init_uarts
>>
>> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-
>samsung/Makefile
>> index b1d82cc..0d5bf8a 100644
>> --- a/arch/arm/plat-samsung/Makefile
>> +++ b/arch/arm/plat-samsung/Makefile
>> @@ -12,7 +12,7 @@ obj- :=
>> # Objects we always build independent of SoC choice
>>
>> obj-y += init.o
>> -obj-y += time.o
>> +obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
>> obj-y += clock.o
>> obj-y += pwm-clock.o
>> obj-y += gpio.o
>> --
>> 1.6.2.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-
>soc" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>--
>To unsubscribe from this list: send the line "unsubscribe linux-samsung-
>soc" in
>the body of a message to majordomo at vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list