[PATCH] ARM/nuc900: patch for adding the global control registers definition

[Wan ZongShun]

This patch is to add the global control registers definition,
many drivers need it, such as usb driver,I need it to control
usb phy open or close, so I sent this patch.

Signed-off-by: Wan ZongShun <mcuos.com at gmail.com>

---
 arch/arm/mach-w90x900/include/mach/regs-gcr.h |   39 +++++++++++++++++++++++++
 1 files changed, 39 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-gcr.h

diff --git a/arch/arm/mach-w90x900/include/mach/regs-gcr.h b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
new file mode 100644
index 0000000..6087abd
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-gcr.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-gcr.h
+ *
+ * Copyright (c) 2010 Nuvoton technology corporation
+ * All rights reserved.
+ *
+ * Wan ZongShun <mcuos.com at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_GCR_H
+#define __ASM_ARCH_REGS_GCR_H
+
+/* Global control registers */
+
+#define GCR_BA		W90X900_VA_GCR
+#define REG_PDID	(GCR_BA+0x000)
+#define REG_PWRON	(GCR_BA+0x004)
+#define REG_ARBCON	(GCR_BA+0x008)
+#define REG_MFSEL	(GCR_BA+0x00C)
+#define REG_EBIDPE	(GCR_BA+0x010)
+#define REG_LCDDPE	(GCR_BA+0x014)
+#define REG_GPIOCPE	(GCR_BA+0x018)
+#define REG_GPIODPE	(GCR_BA+0x01C)
+#define REG_GPIOEPE	(GCR_BA+0x020)
+#define REG_GPIOFPE	(GCR_BA+0x024)
+#define REG_GPIOGPE	(GCR_BA+0x028)
+#define REG_GPIOHPE	(GCR_BA+0x02C)
+#define REG_GPIOIPE	(GCR_BA+0x030)
+#define REG_GTMP1	(GCR_BA+0x034)
+#define REG_GTMP2	(GCR_BA+0x038)
+#define REG_GTMP3	(GCR_BA+0x03C)
+
+#endif /*  __ASM_ARCH_REGS_GCR_H */
-- 
1.6.3.3