[PATCH v3 3/3] sdhci-s3c: Add SDHCI_QUIRK_NO_WP_BIT quirk for Samsung SoC

[Maurus Cuelenaere]

 Op 23-07-10 13:56, Kukjin Kim schreef:
> From: Hyuk Lee <hyuk1.lee at samsung.com>
>
> If host controller doesn't have WP pin which should be connnected with SDMMC
> card WP pin, can implement get_ro function with using the allocated gpio.
> In order to use this quirk wp_gpio in the platform data must be set.
>
> Signed-off-by: Hyuk Lee <hyuk1.lee at samsung.com>
> Signed-off-by: Kukjin Kim <kgene.kim at samsung.com>
> ---
>  drivers/mmc/host/sdhci-s3c.c |   43 ++++++++++++++++++++++++++++++++++++++++++
>  drivers/mmc/host/sdhci.c     |    3 ++
>  drivers/mmc/host/sdhci.h     |    3 ++
>  3 files changed, 49 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 0d25285..0b75e57 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -22,6 +22,7 @@
>  
>  #include <linux/mmc/host.h>
>  
> +#include <plat/gpio-cfg.h>
>  #include <plat/sdhci.h>
>  #include <plat/regs-sdhci.h>
>  
> @@ -213,6 +214,36 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
>  }
>  
>  /**
> + * sdhci_s3c_get_ro - callback for get_ro
> + * @host: The SDHCI host being changed
> + *
> + * If the WP pin is connected with GPIO, can get the value which indicates
> + * the card is locked or not.
> +*/
> +static int sdhci_s3c_get_ro(struct mmc_host *mmc)
> +{
> +	struct sdhci_s3c *sc;
> +	struct sdhci_host *host;
> +
> +	host = mmc_priv(mmc);
> +	sc = sdhci_priv(host);

This can be done as static initializer if you reverse the order above.

> +
> +	return gpio_get_value(sc->pdata->wp_gpio);
> +}

-- 
Maurus Cuelenaere