[PATCH 0/3] Enable pxa310 usb otg port host mode

[Igor Grinberg]

>
> On Thu, Jul 15, 2010 at 3:10 PM, Igor Grinberg <grinberg at compulab.co.il> wrote:
>   
>> This patch series introduces the U2D Controller and
>> Host driver for PXA3xx and enables cm-x300 usb host port2.
>>
>> This patch series depends on
>> "Generic ULPI driver extention" patch series,
>> which is currently sent for review to
>> linux-usb at vger.kernel.org mailing list
>>
>> Igor Grinberg (3):
>>  [ARM] pxa3xx: Add U2D controller and driver
>>  [ARM] usb/host/ohci-pxa27x: enable OHCI over U2DC
>>  [ARM] pxa/cm-x300: enable USB host port2
>>
>>  arch/arm/mach-pxa/Kconfig                   |    4 +
>>  arch/arm/mach-pxa/Makefile                  |    2 +-
>>  arch/arm/mach-pxa/cm-x300.c                 |   77 ++++++
>>  arch/arm/mach-pxa/devices.c                 |   28 ++
>>  arch/arm/mach-pxa/devices.h                 |    1 +
>>  arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h |   35 +++
>>  arch/arm/mach-pxa/pxa3xx-u2d.c              |  392 +++++++++++++++++++++++++++
>>     
> Will pxa3xx-ulpi.c be a better name here? I do like pxa3xx-u2d.c to be
> the driver name for the U2D controller, and be placed in drivers/usb/
>   

Well, the intend was to make a start for the U2D driver,
so there will be facilities for comunicating with the controller.

I can separate the U2D stuff from the pxa310 specific ulpi,
is this what you mean?

> Otherwise looks OK to me.
>
>   
>>  arch/arm/mach-pxa/pxa3xx.c                  |    2 +-
>>  drivers/usb/host/ohci-pxa27x.c              |    7 +
>>  9 files changed, 546 insertions(+), 2 deletions(-)
>>  create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
>>  create mode 100644 arch/arm/mach-pxa/pxa3xx-u2d.c
>>
>>
>>     
>   

-- 
Regards,
Igor.