[PATCH 0/3] Enable pxa310 usb otg port host mode

[Igor Grinberg]

Eric,

Any comments?

> This patch series introduces the U2D Controller and
> Host driver for PXA3xx and enables cm-x300 usb host port2.
>
> This patch series depends on
> "Generic ULPI driver extention" patch series,
> which is currently sent for review to
> linux-usb at vger.kernel.org mailing list
>
> Igor Grinberg (3):
>   [ARM] pxa3xx: Add U2D controller and driver
>   [ARM] usb/host/ohci-pxa27x: enable OHCI over U2DC
>   [ARM] pxa/cm-x300: enable USB host port2
>
>  arch/arm/mach-pxa/Kconfig                   |    4 +
>  arch/arm/mach-pxa/Makefile                  |    2 +-
>  arch/arm/mach-pxa/cm-x300.c                 |   77 ++++++
>  arch/arm/mach-pxa/devices.c                 |   28 ++
>  arch/arm/mach-pxa/devices.h                 |    1 +
>  arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h |   35 +++
>  arch/arm/mach-pxa/pxa3xx-u2d.c              |  392 +++++++++++++++++++++++++++
>  arch/arm/mach-pxa/pxa3xx.c                  |    2 +-
>  drivers/usb/host/ohci-pxa27x.c              |    7 +
>  9 files changed, 546 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h
>  create mode 100644 arch/arm/mach-pxa/pxa3xx-u2d.c
>
>
>   

-- 
Regards,
Igor.