[PATCH v2 2/5] ARM: S5P: Added default pll values for APLL 800/1000MHz

[MyungJoo Ham]

CPUFREQ of S5PV210 uses different APLL settings and we provide
such values for CPUFREQ at pll.h. We have been using differently
between EVT0 and EVT1 machines. Although this version of kernel
assumes that the CPU is EVT1, users may use code for EVT0 later.

Note that at 1GHz of ARMCLK, APLL should be 1GHz and for other lower
ARMCLK, APLL should be 800MHz.

Signed-off-by: MyungJoo Ham <myungjoo.ham at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
 arch/arm/plat-s5p/include/plat/pll.h |    8 ++++++++
 1 files changed, 8 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index 7db3227..3112aba 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -21,6 +21,14 @@
 
 #include <asm/div64.h>
 
+#ifdef CONFIG_CPU_S5PC110_EVT0_ERRATA
+#define PLL45XX_APLL_VAL_1000	(1 << 31) | (0xfa<<16) | (0x6<<8) | (0x1)
+#define PLL45XX_APLL_VAL_800	(1 << 31) | (0xc8<<16) | (0x6<<8) | (0x1)
+#else
+#define PLL45XX_APLL_VAL_1000	(1 << 31) | (125<<16) | (3<<8) | (1)
+#define PLL45XX_APLL_VAL_800	(1 << 31) | (100<<16) | (3<<8) | (1)
+#endif
+
 enum pll45xx_type_t {
 	pll_4500,
 	pll_4502,
-- 
1.6.3.3