[PATCH 3/3] usb/host || arch/arm: Remove dead CONFIG_ARCH_KARO

[Christian Dietrich]

CONFIG_ARCH_KARO doesn't exist in Kconfig and is never defined anywhere
else, therefore removing all references for it from the source code.

Signed-off-by: Christian Dietrich <qy03fugy at stud.informatik.uni-erlangen.de>
---
 arch/arm/tools/mach-types  |    1 -
 drivers/usb/host/isp1362.h |   24 +-----------------------
 2 files changed, 1 insertions(+), 24 deletions(-)

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 8f10d24..3d86318 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -204,7 +204,6 @@ omaha			ARCH_OMAHA		OMAHA			186
 ta7			ARCH_TA7		TA7			187
 nova			SA1100_NOVA		NOVA			188
 hmk			ARCH_HMK		HMK			189
-karo			ARCH_KARO		KARO			190
 fester			SA1100_FESTER		FESTER			191
 gpi			ARCH_GPI		GPI			192
 smdk2410		ARCH_SMDK2410		SMDK2410		193
diff --git a/drivers/usb/host/isp1362.h b/drivers/usb/host/isp1362.h
index d995351..0f97820 100644
--- a/drivers/usb/host/isp1362.h
+++ b/drivers/usb/host/isp1362.h
@@ -8,29 +8,7 @@
 /*
  * Platform specific compile time options
  */
-#if defined(CONFIG_ARCH_KARO)
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/karo.h>
-
-#define USE_32BIT		1
-
-
-/* These options are mutually eclusive */
-#define USE_PLATFORM_DELAY	1
-#define USE_NDELAY		0
-/*
- * MAX_ROOT_PORTS: Number of downstream ports
- *
- * The chip has two USB ports, one of which can be configured as
- * an USB device port, so the value of this constant is implementation
- * specific.
- */
-#define MAX_ROOT_PORTS		2
-#define DUMMY_DELAY_ACCESS do {} while (0)
-
-/* insert platform specific definitions for other machines here */
-#elif defined(CONFIG_BLACKFIN)
+#if defined(CONFIG_BLACKFIN)
 
 #include <linux/io.h>
 #define USE_32BIT		0
-- 
1.7.0.4