[PATCH 2/3] arm: s5pv210: Aquila: add support for MAX8998 PMIC
Kukjin Kim
kgene.kim at samsung.com
Wed Jul 14 00:56:46 EDT 2010
Marek Szyprowski wrote:
>
> This patch adds required platform definitions for MAX8998 PMIC driver.
Power
> regulators for LDO and BUCK outputs has been defined as well as a simple
> gpio-keys button for power key (to enable wakeup functionality with
> external interrupt).
>
> Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> arch/arm/mach-s5pv210/mach-aquila.c | 326
> +++++++++++++++++++++++++++++++++++
> 1 files changed, 326 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c
b/arch/arm/mach-s5pv210/mach-
> aquila.c
> index 44db0fc..ad0ee96 100644
> --- a/arch/arm/mach-s5pv210/mach-aquila.c
> +++ b/arch/arm/mach-s5pv210/mach-aquila.c
> @@ -13,6 +13,11 @@
> #include <linux/init.h>
> #include <linux/serial_core.h>
> #include <linux/fb.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-gpio.h>
> +#include <linux/mfd/max8998.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
> @@ -22,7 +27,9 @@
> #include <mach/map.h>
> #include <mach/regs-clock.h>
> #include <mach/regs-fb.h>
> +#include <mach/gpio.h>
It's <linux/gpio.h>
>
> +#include <plat/gpio-cfg.h>
> #include <plat/regs-serial.h>
> #include <plat/s5pv210.h>
> #include <plat/devs.h>
> @@ -122,7 +129,321 @@ static struct s3c_fb_platdata aquila_lcd_pdata
__initdata
> = {
> .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
> };
>
> +/* MAX8998 regulators */
> +#if defined(CONFIG_REGULATOR_MAX8998) || \
> +
> defined(CONFIG_REGULATOR_MAX8998_MODULE)
> +
> +static struct regulator_init_data aquila_ldo2_data = {
> + .constraints = {
> + .name = "VALIVE_1.1V",
> + .min_uV = 1100000,
> + .max_uV = 1100000,
> + .apply_uV = 1,
> + .always_on = 1,
> + .state_mem = {
> + .enabled = 1,
> + },
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo3_data = {
> + .constraints = {
> + .name = "VUSB/MIPI_1.1V",
> + .min_uV = 1100000,
> + .max_uV = 1100000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo4_data = {
> + .constraints = {
> + .name = "VDAC_3.3V",
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo5_data = {
> + .constraints = {
> + .name = "VTF_2.8V",
> + .min_uV = 2800000,
> + .max_uV = 2800000,
> + .apply_uV = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo6_data = {
> + .constraints = {
> + .name = "VCC_3.3V",
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo7_data = {
> + .constraints = {
> + .name = "VCC_3.0V",
> + .min_uV = 3000000,
> + .max_uV = 3000000,
> + .apply_uV = 1,
> + .boot_on = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo8_data = {
> + .constraints = {
> + .name = "VUSB/VADC_3.3V",
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo9_data = {
> + .constraints = {
> + .name = "VCC/VCAM_2.8V",
> + .min_uV = 2800000,
> + .max_uV = 2800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo10_data = {
> + .constraints = {
> + .name = "VPLL_1.1V",
> + .min_uV = 1100000,
> + .max_uV = 1100000,
> + .apply_uV = 1,
> + .boot_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo11_data = {
> + .constraints = {
> + .name = "CAM_IO_2.8V",
> + .min_uV = 2800000,
> + .max_uV = 2800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo12_data = {
> + .constraints = {
> + .name = "CAM_ISP_1.2V",
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo13_data = {
> + .constraints = {
> + .name = "CAM_A_2.8V",
> + .min_uV = 2800000,
> + .max_uV = 2800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo14_data = {
> + .constraints = {
> + .name = "CAM_CIF_1.8V",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo15_data = {
> + .constraints = {
> + .name = "CAM_AF_3.3V",
> + .min_uV = 3300000,
> + .max_uV = 3300000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo16_data = {
> + .constraints = {
> + .name = "VMIPI_1.8V",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct regulator_init_data aquila_ldo17_data = {
> + .constraints = {
> + .name = "CAM_8M_1.8V",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +/* BUCK */
> +static struct regulator_consumer_supply buck1_consumer[] = {
> + { .supply = "vddarm", },
> +};
> +
> +static struct regulator_consumer_supply buck2_consumer[] = {
> + { .supply = "vddint", },
> +};
> +
> +static struct regulator_init_data aquila_buck1_data = {
> + .constraints = {
> + .name = "VARM_1.2V",
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
> + REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
> + .consumer_supplies = buck1_consumer,
> +};
> +
> +static struct regulator_init_data aquila_buck2_data = {
> + .constraints = {
> + .name = "VINT_1.2V",
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
> + REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
> + .consumer_supplies = buck2_consumer,
> +};
> +
> +static struct regulator_init_data aquila_buck3_data = {
> + .constraints = {
> + .name = "VCC_1.8V",
> + .min_uV = 1800000,
> + .max_uV = 1800000,
> + .apply_uV = 1,
> + .state_mem = {
> + .enabled = 1,
> + },
> + },
> +};
> +
> +static struct regulator_init_data aquila_buck4_data = {
> + .constraints = {
> + .name = "CAM_CORE_1.2V",
> + .min_uV = 1200000,
> + .max_uV = 1200000,
> + .apply_uV = 1,
> + .always_on = 1,
> + },
> +};
> +
> +static struct max8998_regulator_data aquila_regulators[] = {
> + { MAX8998_LDO2, &aquila_ldo2_data },
> + { MAX8998_LDO3, &aquila_ldo3_data },
> + { MAX8998_LDO4, &aquila_ldo4_data },
> + { MAX8998_LDO5, &aquila_ldo5_data },
> + { MAX8998_LDO6, &aquila_ldo6_data },
> + { MAX8998_LDO7, &aquila_ldo7_data },
> + { MAX8998_LDO8, &aquila_ldo8_data },
> + { MAX8998_LDO9, &aquila_ldo9_data },
> + { MAX8998_LDO10, &aquila_ldo10_data },
> + { MAX8998_LDO11, &aquila_ldo11_data },
> + { MAX8998_LDO12, &aquila_ldo12_data },
> + { MAX8998_LDO13, &aquila_ldo13_data },
> + { MAX8998_LDO14, &aquila_ldo14_data },
> + { MAX8998_LDO15, &aquila_ldo15_data },
> + { MAX8998_LDO16, &aquila_ldo16_data },
> + { MAX8998_LDO17, &aquila_ldo17_data },
> + { MAX8998_BUCK1, &aquila_buck1_data },
> + { MAX8998_BUCK2, &aquila_buck2_data },
> + { MAX8998_BUCK3, &aquila_buck3_data },
> + { MAX8998_BUCK4, &aquila_buck4_data },
> +};
> +
> +static struct max8998_platform_data max8998_platform_data = {
How about 'static struct max8998_platform_data aquila_max8998_info' instead
of same max8998_platform_data?
> + .num_regulators = ARRAY_SIZE(aquila_regulators),
> + .regulators = aquila_regulators,
> +};
> +#endif
> +
> +/* GPIO I2C PMIC */
> +#define AP_I2C_GPIO_PMIC_BUS_4 4
How about moving to head?...or...directly to use hard-coding with comment?
> +static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
> + .sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
> + .scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
> +};
> +
> +static struct platform_device aquila_i2c_gpio_pmic = {
> + .name = "i2c-gpio",
> + .id = AP_I2C_GPIO_PMIC_BUS_4,
> + .dev = {
> + .platform_data = &aquila_i2c_gpio_pmic_data,
> + },
> +};
> +
> +static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
> +#if defined(CONFIG_REGULATOR_MAX8998) ||
> defined(CONFIG_REGULATOR_MAX8998_MODULE)
How about to use same form(?)...like above..
In my opinion, this form is better even though exceed 80 chars...
But depends on private taste :-)
> + {
> + /* 0xCC when SRAD = 0 */
> + I2C_BOARD_INFO("max8998", 0xCC >> 1),
> + .platform_data = &max8998_platform_data,
> + },
> +#endif
> +};
> +
> +/* PMIC Power button */
> +static struct gpio_keys_button aquila_gpio_keys_table[] = {
> + {
> + .code = KEY_POWER,
> + .gpio = S5PV210_GPH2(6),
> + .desc = "gpio-keys: KEY_POWER",
> + .type = EV_KEY,
> + .active_low = 1,
> + .wakeup = 1,
> + .debounce_interval = 1,
> + },
> +};
> +
> +static struct gpio_keys_platform_data aquila_gpio_keys_data = {
> + .buttons = aquila_gpio_keys_table,
^^^^^^^^^
> + .nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
^^^^^^^^
To use tab is better at marking place.
> +};
> +
> +static struct platform_device aquila_device_gpiokeys = {
> + .name = "gpio-keys",
> + .dev = {
> + .platform_data = &aquila_gpio_keys_data,
> + },
> +};
> +
> +static void __init aquila_pmic_init(void)
> +{
> + /* AP_PMIC_IRQ: EINT7 */
> + s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
Maybe need 'ARM: S5P: Support gpio interrupts' to this gpio external
interrupt...or...
Hmm...
> + s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
> +
> + /* nPower: EINT22 */
> + s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
> + s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
> +}
> +
> static struct platform_device *aquila_devices[] __initdata = {
> + &aquila_i2c_gpio_pmic,
> + &aquila_device_gpiokeys,
> &s3c_device_fb,
> &s5pc110_device_onenand,
> };
> @@ -136,6 +457,11 @@ static void __init aquila_map_io(void)
>
> static void __init aquila_machine_init(void)
> {
> + /* PMIC */
> + aquila_pmic_init();
> + i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4,
> i2c_gpio_pmic_devs,
> + ARRAY_SIZE(i2c_gpio_pmic_devs));
> +
> /* FB */
> s3c_fb_set_platdata(&aquila_lcd_pdata);
>
> --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list