[PATCH 1/5] pxa: Sane naming of gpios for palm platform

Marek Vasut marek.vasut at gmail.com
Tue Jul 13 05:58:38 EDT 2010


Dne Út 13. července 2010 10:10:31 Eric Miao napsal(a):
> On Tue, Jul 13, 2010 at 3:38 PM, Marek Vasut <marek.vasut at gmail.com> wrote:
> > Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> > ---
> >  arch/arm/mach-pxa/include/mach/palmld.h  |   58
> > ++++++++++++++-------------- arch/arm/mach-pxa/include/mach/palmt5.h  |
> >   30 +++++++-------
> >  arch/arm/mach-pxa/include/mach/palmtx.h  |   44 +++++++++++-----------
> >  arch/arm/mach-pxa/include/mach/palmz72.h |   28 +++++++-------
> 
> What's wrong with the original naming scheme?

GPIO_NR was never intended to be used. It's some stupidity with historic roots. 
(NR == number ... it was intended to be substituted, but never was ... time to 
do it).
> 
> >  arch/arm/mach-pxa/palmld.c               |   60
> > +++++++++++++++--------------- arch/arm/mach-pxa/palmt5.c              
> > |   52 +++++++++++++------------- arch/arm/mach-pxa/palmtx.c            
> >   |   52 +++++++++++++------------- arch/arm/mach-pxa/palmz72.c        
> >      |   60 +++++++++++++++--------------- drivers/ata/pata_palmld.c    
> >            |   22 +++++-----
> >  drivers/pcmcia/pxa2xx_palmld.c           |   32 ++++++++--------
> >  drivers/pcmcia/pxa2xx_palmtx.c           |   42 ++++++++++----------
> >  11 files changed, 240 insertions(+), 240 deletions(-)
> >  create mode 100644 arch/arm/mach-pxa/palm27x.c
> >  create mode 100644 configs/config-colibri
> >  create mode 100644 configs/config-income
> >  create mode 100644 configs/config-littleton
> >  create mode 100644 configs/config-vpac270
> >  create mode 100644 configs/config-vpac270-minimal
> >  create mode 100644 configs/config-zaurus
> >  create mode 100644 configs/config-zipitz2
> 
> And what's this config crap for?

Oh jeez ... git is making fun from me
> 
> > diff --git a/arch/arm/mach-pxa/include/mach/palmld.h
> > b/arch/arm/mach-pxa/include/mach/palmld.h index ae536e8..8f9034d 100644
> > --- a/arch/arm/mach-pxa/include/mach/palmld.h
> > +++ b/arch/arm/mach-pxa/include/mach/palmld.h
> > @@ -16,55 +16,55 @@
> >  /** HERE ARE GPIOs **/
> > 
> >  /* GPIOs */
> > -#define GPIO_NR_PALMLD_GPIO_RESET      1
> > -#define GPIO_NR_PALMLD_POWER_DETECT    4
> > -#define GPIO_NR_PALMLD_HOTSYNC_BUTTON_N        10
> > -#define GPIO_NR_PALMLD_POWER_SWITCH    12
> > -#define GPIO_NR_PALMLD_EARPHONE_DETECT         13
> > -#define GPIO_NR_PALMLD_LOCK_SWITCH     15
> > +#define GPIO1_PALMLD_GPIO_RESET                1
> > +#define GPIO4_PALMLD_POWER_DETECT      4
> > +#define GPIO10_PALMLD_HOTSYNC_BUTTON_N 10
> > +#define GPIO12_PALMLD_POWER_SWITCH     12
> > +#define GPIO13_PALMLD_EARPHONE_DETECT  13
> > +#define GPIO15_PALMLD_LOCK_SWITCH      15
> > 
> >  /* SD/MMC */
> > -#define GPIO_NR_PALMLD_SD_DETECT_N     14
> > -#define GPIO_NR_PALMLD_SD_POWER                114
> > -#define GPIO_NR_PALMLD_SD_READONLY     116
> > +#define GPIO14_PALMLD_SD_DETECT_N      14
> > +#define GPIO114_PALMLD_SD_POWER                114
> > +#define GPIO116_PALMLD_SD_READONLY     116
> > 
> >  /* TOUCHSCREEN */
> > -#define GPIO_NR_PALMLD_WM9712_IRQ      27
> > +#define GPIO27_PALMLD_WM9712_IRQ       27
> > 
> >  /* IRDA */
> > -#define GPIO_NR_PALMLD_IR_DISABLE      108
> > +#define GPIO108_PALMLD_IR_DISABLE      108
> > 
> >  /* LCD/BACKLIGHT */
> > -#define GPIO_NR_PALMLD_BL_POWER                19
> > -#define GPIO_NR_PALMLD_LCD_POWER       96
> > +#define GPIO19_PALMLD_BL_POWER         19
> > +#define GPIO96_PALMLD_LCD_POWER                96
> > 
> >  /* LCD BORDER */
> > -#define GPIO_NR_PALMLD_BORDER_SWITCH   21
> > -#define GPIO_NR_PALMLD_BORDER_SELECT   22
> > +#define GPIO21_PALMLD_BORDER_SWITCH    21
> > +#define GPIO22_PALMLD_BORDER_SELECT    22
> > 
> >  /* BLUETOOTH */
> > -#define GPIO_NR_PALMLD_BT_POWER                17
> > -#define GPIO_NR_PALMLD_BT_RESET                83
> > +#define GPIO17_PALMLD_BT_POWER         17
> > +#define GPIO83_PALMLD_BT_RESET         83
> > 
> >  /* PCMCIA (WiFi) */
> > -#define GPIO_NR_PALMLD_PCMCIA_READY    38
> > -#define GPIO_NR_PALMLD_PCMCIA_POWER    36
> > -#define GPIO_NR_PALMLD_PCMCIA_RESET    81
> > +#define GPIO38_PALMLD_PCMCIA_READY     38
> > +#define GPIO36_PALMLD_PCMCIA_POWER     36
> > +#define GPIO81_PALMLD_PCMCIA_RESET     81
> > 
> >  /* LEDs */
> > -#define GPIO_NR_PALMLD_LED_GREEN       52
> > -#define GPIO_NR_PALMLD_LED_AMBER       94
> > +#define GPIO52_PALMLD_LED_GREEN                52
> > +#define GPIO94_PALMLD_LED_AMBER                94
> > 
> >  /* IDE */
> > -#define GPIO_NR_PALMLD_IDE_RESET       98
> > -#define GPIO_NR_PALMLD_IDE_PWEN                115
> > +#define GPIO98_PALMLD_IDE_RESET                98
> > +#define GPIO115_PALMLD_IDE_PWEN                115
> > 
> >  /* USB */
> > -#define GPIO_NR_PALMLD_USB_DETECT_N    3
> > -#define GPIO_NR_PALMLD_USB_READY       86
> > -#define GPIO_NR_PALMLD_USB_RESET       88
> > -#define GPIO_NR_PALMLD_USB_INT         106
> > -#define GPIO_NR_PALMLD_USB_POWER       118
> > +#define GPIO3_PALMLD_USB_DETECT_N      3
> > +#define GPIO86_PALMLD_USB_READY                86
> > +#define GPIO88_PALMLD_USB_RESET                88
> > +#define GPIO106_PALMLD_USB_INT         106
> > +#define GPIO118_PALMLD_USB_POWER       118
> >  /* 20, 53 and 86 are usb related too */
> > 
> >  /* INTERRUPTS */
> > diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h
> > b/arch/arm/mach-pxa/include/mach/palmt5.h index 6baf746..d70bb62 100644
> > --- a/arch/arm/mach-pxa/include/mach/palmt5.h
> > +++ b/arch/arm/mach-pxa/include/mach/palmt5.h
> > @@ -18,34 +18,34 @@
> >  /** HERE ARE GPIOs **/
> > 
> >  /* GPIOs */
> > -#define GPIO_NR_PALMT5_GPIO_RESET              1
> > +#define GPIO1_PALMT5_GPIO_RESET                        1
> > 
> > -#define GPIO_NR_PALMT5_POWER_DETECT            90
> > -#define GPIO_NR_PALMT5_HOTSYNC_BUTTON_N                10
> > -#define GPIO_NR_PALMT5_EARPHONE_DETECT         107
> > +#define GPIO90_PALMT5_POWER_DETECT             90
> > +#define GPIO10_PALMT5_HOTSYNC_BUTTON_N         10
> > +#define GPIO107_PALMT5_EARPHONE_DETECT         107
> > 
> >  /* SD/MMC */
> > -#define GPIO_NR_PALMT5_SD_DETECT_N             14
> > -#define GPIO_NR_PALMT5_SD_POWER                        114
> > -#define GPIO_NR_PALMT5_SD_READONLY             115
> > +#define GPIO14_PALMT5_SD_DETECT_N              14
> > +#define GPIO114_PALMT5_SD_POWER                        114
> > +#define GPIO115_PALMT5_SD_READONLY             115
> > 
> >  /* TOUCHSCREEN */
> > -#define GPIO_NR_PALMT5_WM9712_IRQ              27
> > +#define GPIO27_PALMT5_WM9712_IRQ               27
> > 
> >  /* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ?
> > */ -#define GPIO_NR_PALMT5_IR_DISABLE              40
> > +#define GPIO40_PALMT5_IR_DISABLE               40
> > 
> >  /* USB */
> > -#define GPIO_NR_PALMT5_USB_DETECT_N            15
> > -#define GPIO_NR_PALMT5_USB_PULLUP              93
> > +#define GPIO15_PALMT5_USB_DETECT_N             15
> > +#define GPIO93_PALMT5_USB_PULLUP               93
> > 
> >  /* LCD/BACKLIGHT */
> > -#define GPIO_NR_PALMT5_BL_POWER                        84
> > -#define GPIO_NR_PALMT5_LCD_POWER               96
> > +#define GPIO84_PALMT5_BL_POWER                 84
> > +#define GPIO96_PALMT5_LCD_POWER                        96
> > 
> >  /* BLUETOOTH */
> > -#define GPIO_NR_PALMT5_BT_POWER                        17
> > -#define GPIO_NR_PALMT5_BT_RESET                        83
> > +#define GPIO17_PALMT5_BT_POWER                 17
> > +#define GPIO83_PALMT5_BT_RESET                 83
> > 
> >  /* INTERRUPTS */
> >  #define IRQ_GPIO_PALMT5_SD_DETECT_N  
> >  IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N) diff --git
> > a/arch/arm/mach-pxa/include/mach/palmtx.h
> > b/arch/arm/mach-pxa/include/mach/palmtx.h index 10abc4f..8b97b4d 100644
> > --- a/arch/arm/mach-pxa/include/mach/palmtx.h
> > +++ b/arch/arm/mach-pxa/include/mach/palmtx.h
> > @@ -19,47 +19,47 @@
> >  /** HERE ARE GPIOs **/
> > 
> >  /* GPIOs */
> > -#define GPIO_NR_PALMTX_GPIO_RESET              1
> > +#define GPIO1_PALMTX_GPIO_RESET                        1
> > 
> > -#define GPIO_NR_PALMTX_POWER_DETECT            12 /* 90 */
> > -#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N                10
> > -#define GPIO_NR_PALMTX_EARPHONE_DETECT         107
> > +#define GPIO12_PALMTX_POWER_DETECT             12 /* 90 */
> > +#define GPIO10_PALMTX_HOTSYNC_BUTTON_N         10
> > +#define GPIO107_PALMTX_EARPHONE_DETECT         107
> > 
> >  /* SD/MMC */
> > -#define GPIO_NR_PALMTX_SD_DETECT_N             14
> > -#define GPIO_NR_PALMTX_SD_POWER                        114 /* probably
> > */ -#define GPIO_NR_PALMTX_SD_READONLY             115 /* probably */
> > +#define GPIO14_PALMTX_SD_DETECT_N              14
> > +#define GPIO114_PALMTX_SD_POWER                        114 /* probably
> > */ +#define GPIO115_PALMTX_SD_READONLY             115 /* probably */
> > 
> >  /* TOUCHSCREEN */
> > -#define GPIO_NR_PALMTX_WM9712_IRQ              27
> > +#define GPIO27_PALMTX_WM9712_IRQ               27
> > 
> >  /* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ?
> > */ -#define GPIO_NR_PALMTX_IR_DISABLE              40
> > +#define GPIO40_PALMTX_IR_DISABLE               40
> > 
> >  /* USB */
> > -#define GPIO_NR_PALMTX_USB_DETECT_N            13
> > -#define GPIO_NR_PALMTX_USB_PULLUP              93
> > +#define GPIO13_PALMTX_USB_DETECT_N             13
> > +#define GPIO93_PALMTX_USB_PULLUP               93
> > 
> >  /* LCD/BACKLIGHT */
> > -#define GPIO_NR_PALMTX_BL_POWER                        84
> > -#define GPIO_NR_PALMTX_LCD_POWER               96
> > +#define GPIO84_PALMTX_BL_POWER                 84
> > +#define GPIO96_PALMTX_LCD_POWER                        96
> > 
> >  /* LCD BORDER */
> > -#define GPIO_NR_PALMTX_BORDER_SWITCH           98
> > -#define GPIO_NR_PALMTX_BORDER_SELECT           22
> > +#define GPIO98_PALMTX_BORDER_SWITCH            98
> > +#define GPIO22_PALMTX_BORDER_SELECT            22
> > 
> >  /* BLUETOOTH */
> > -#define GPIO_NR_PALMTX_BT_POWER                        17
> > -#define GPIO_NR_PALMTX_BT_RESET                        83
> > +#define GPIO17_PALMTX_BT_POWER                 17
> > +#define GPIO83_PALMTX_BT_RESET                 83
> > 
> >  /* PCMCIA (WiFi) */
> > -#define GPIO_NR_PALMTX_PCMCIA_POWER1           94
> > -#define GPIO_NR_PALMTX_PCMCIA_POWER2           108
> > -#define GPIO_NR_PALMTX_PCMCIA_RESET            79
> > -#define GPIO_NR_PALMTX_PCMCIA_READY            116
> > +#define GPIO94_PALMTX_PCMCIA_POWER1            94
> > +#define GPIO108_PALMTX_PCMCIA_POWER2           108
> > +#define GPIO79_PALMTX_PCMCIA_RESET             79
> > +#define GPIO116_PALMTX_PCMCIA_READY            116
> > 
> >  /* NAND Flash ... this GPIO may be incorrect! */
> > -#define GPIO_NR_PALMTX_NAND_BUFFER_DIR         79
> > +#define GPIO79_PALMTX_NAND_BUFFER_DIR          79
> > 
> >  /* INTERRUPTS */
> >  #define IRQ_GPIO_PALMTX_SD_DETECT_N  
> >  IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) diff --git
> > a/arch/arm/mach-pxa/include/mach/palmz72.h
> > b/arch/arm/mach-pxa/include/mach/palmz72.h index 2bbcf70..83dced5 100644
> > --- a/arch/arm/mach-pxa/include/mach/palmz72.h
> > +++ b/arch/arm/mach-pxa/include/mach/palmz72.h
> > @@ -15,34 +15,34 @@
> >  #define _INCLUDE_PALMZ72_H_
> > 
> >  /* Power and control */
> > -#define GPIO_NR_PALMZ72_GPIO_RESET             1
> > -#define GPIO_NR_PALMZ72_POWER_DETECT           0
> > +#define GPIO1_PALMZ72_GPIO_RESET               1
> > +#define GPIO0_PALMZ72_POWER_DETECT             0
> > 
> >  /* SD/MMC */
> > -#define GPIO_NR_PALMZ72_SD_DETECT_N            14
> > -#define GPIO_NR_PALMZ72_SD_POWER_N             98
> > -#define GPIO_NR_PALMZ72_SD_RO                  115
> > +#define GPIO14_PALMZ72_SD_DETECT_N             14
> > +#define GPIO98_PALMZ72_SD_POWER_N              98
> > +#define GPIO115_PALMZ72_SD_RO                  115
> > 
> >  /* Touchscreen */
> > -#define GPIO_NR_PALMZ72_WM9712_IRQ             27
> > +#define GPIO27_PALMZ72_WM9712_IRQ              27
> > 
> >  /* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ?
> > */ -#define GPIO_NR_PALMZ72_IR_DISABLE             49
> > +#define GPIO49_PALMZ72_IR_DISABLE              49
> > 
> >  /* USB */
> > -#define GPIO_NR_PALMZ72_USB_DETECT_N           15
> > -#define GPIO_NR_PALMZ72_USB_PULLUP             95
> > +#define GPIO15_PALMZ72_USB_DETECT_N            15
> > +#define GPIO95_PALMZ72_USB_PULLUP              95
> > 
> >  /* LCD/Backlight */
> > -#define GPIO_NR_PALMZ72_BL_POWER               20
> > -#define GPIO_NR_PALMZ72_LCD_POWER              96
> > +#define GPIO20_PALMZ72_BL_POWER                        20
> > +#define GPIO96_PALMZ72_LCD_POWER               96
> > 
> >  /* LED */
> > -#define GPIO_NR_PALMZ72_LED_GREEN              88
> > +#define GPIO88_PALMZ72_LED_GREEN               88
> > 
> >  /* Bluetooth */
> > -#define GPIO_NR_PALMZ72_BT_POWER               17
> > -#define GPIO_NR_PALMZ72_BT_RESET               83
> > +#define GPIO17_PALMZ72_BT_POWER                        17
> > +#define GPIO83_PALMZ72_BT_RESET                        83
> > 
> >  /** Initial values **/
> > 
> > diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
> > index 83a1a55..bec35e2 100644
> > --- a/arch/arm/mach-pxa/palmld.c
> > +++ b/arch/arm/mach-pxa/palmld.c
> > @@ -165,9 +165,9 @@ static struct platform_device palmld_flash = {
> >  ************************************************************************
> > ******/ static struct pxamci_platform_data palmld_mci_platform_data = {
> > .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
> > -       .gpio_card_detect       = GPIO_NR_PALMLD_SD_DETECT_N,
> > -       .gpio_card_ro           = GPIO_NR_PALMLD_SD_READONLY,
> > -       .gpio_power             = GPIO_NR_PALMLD_SD_POWER,
> > +       .gpio_card_detect       = GPIO14_PALMLD_SD_DETECT_N,
> > +       .gpio_card_ro           = GPIO116_PALMLD_SD_READONLY,
> > +       .gpio_power             = GPIO114_PALMLD_SD_POWER,
> >        .detect_delay_ms        = 200,
> >  };
> > 
> > @@ -204,9 +204,9 @@ static struct pxa27x_keypad_platform_data
> > palmld_keypad_platform_data = { * GPIO keys
> >  ************************************************************************
> > ******/ static struct gpio_keys_button palmld_pxa_buttons[] = {
> > -       {KEY_F8, GPIO_NR_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> > -       {KEY_F9, GPIO_NR_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
> > -       {KEY_POWER, GPIO_NR_PALMLD_POWER_SWITCH, 0, "Power Switch" },
> > +       {KEY_F8, GPIO10_PALMLD_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> > +       {KEY_F9, GPIO15_PALMLD_LOCK_SWITCH, 0, "Lock Switch" },
> > +       {KEY_POWER, GPIO12_PALMLD_POWER_SWITCH, 0, "Power Switch" },
> >  };
> > 
> >  static struct gpio_keys_platform_data palmld_pxa_keys_data = {
> > @@ -229,39 +229,39 @@ static int palmld_backlight_init(struct device
> > *dev) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_BL_POWER, "BL POWER");
> > +       ret = gpio_request(GPIO19_PALMLD_BL_POWER, "BL POWER");
> >        if (ret)
> >                goto err;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_BL_POWER, 0);
> > +       ret = gpio_direction_output(GPIO19_PALMLD_BL_POWER, 0);
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_request(GPIO_NR_PALMLD_LCD_POWER, "LCD POWER");
> > +       ret = gpio_request(GPIO96_PALMLD_LCD_POWER, "LCD POWER");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_LCD_POWER, 0);
> > +       ret = gpio_direction_output(GPIO96_PALMLD_LCD_POWER, 0);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> >  err3:
> > -       gpio_free(GPIO_NR_PALMLD_LCD_POWER);
> > +       gpio_free(GPIO96_PALMLD_LCD_POWER);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMLD_BL_POWER);
> > +       gpio_free(GPIO19_PALMLD_BL_POWER);
> >  err:
> >        return ret;
> >  }
> > 
> >  static int palmld_backlight_notify(struct device *dev, int brightness)
> >  {
> > -       gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
> > -       gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
> > +       gpio_set_value(GPIO19_PALMLD_BL_POWER, brightness);
> > +       gpio_set_value(GPIO96_PALMLD_LCD_POWER, brightness);
> >        return brightness;
> >  }
> > 
> >  static void palmld_backlight_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMLD_BL_POWER);
> > -       gpio_free(GPIO_NR_PALMLD_LCD_POWER);
> > +       gpio_free(GPIO19_PALMLD_BL_POWER);
> > +       gpio_free(GPIO96_PALMLD_LCD_POWER);
> >  }
> > 
> >  static struct platform_pwm_backlight_data palmld_backlight_data = {
> > @@ -286,7 +286,7 @@ static struct platform_device palmld_backlight = {
> >  * IrDA
> >  ************************************************************************
> > ******/ static struct pxaficp_platform_data palmld_ficp_platform_data = {
> > -       .gpio_pwdown            = GPIO_NR_PALMLD_IR_DISABLE,
> > +       .gpio_pwdown            = GPIO108_PALMLD_IR_DISABLE,
> >        .transceiver_cap        = IR_SIRMODE | IR_OFF,
> >  };
> > 
> > @@ -297,11 +297,11 @@ struct gpio_led gpio_leds[] = {
> >  {
> >        .name                   = "palmld:green:led",
> >        .default_trigger        = "none",
> > -       .gpio                   = GPIO_NR_PALMLD_LED_GREEN,
> > +       .gpio                   = GPIO52_PALMLD_LED_GREEN,
> >  }, {
> >        .name                   = "palmld:amber:led",
> >        .default_trigger        = "none",
> > -       .gpio                   = GPIO_NR_PALMLD_LED_AMBER,
> > +       .gpio                   = GPIO94_PALMLD_LED_AMBER,
> >  },
> >  };
> > 
> > @@ -325,44 +325,44 @@ static int power_supply_init(struct device *dev)
> >  {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_POWER_DETECT,
> > "CABLE_STATE_AC"); +       ret = gpio_request(GPIO4_PALMLD_POWER_DETECT,
> > "CABLE_STATE_AC"); if (ret)
> >                goto err1;
> > -       ret = gpio_direction_input(GPIO_NR_PALMLD_POWER_DETECT);
> > +       ret = gpio_direction_input(GPIO4_PALMLD_POWER_DETECT);
> >        if (ret)
> >                goto err2;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_USB_DETECT_N,
> > "CABLE_STATE_USB"); +       ret =
> > gpio_request(GPIO3_PALMLD_USB_DETECT_N, "CABLE_STATE_USB"); if (ret)
> >                goto err2;
> > -       ret = gpio_direction_input(GPIO_NR_PALMLD_USB_DETECT_N);
> > +       ret = gpio_direction_input(GPIO3_PALMLD_USB_DETECT_N);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> > 
> >  err3:
> > -       gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
> > +       gpio_free(GPIO3_PALMLD_USB_DETECT_N);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
> > +       gpio_free(GPIO4_PALMLD_POWER_DETECT);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static int palmld_is_ac_online(void)
> >  {
> > -       return gpio_get_value(GPIO_NR_PALMLD_POWER_DETECT);
> > +       return gpio_get_value(GPIO4_PALMLD_POWER_DETECT);
> >  }
> > 
> >  static int palmld_is_usb_online(void)
> >  {
> > -       return !gpio_get_value(GPIO_NR_PALMLD_USB_DETECT_N);
> > +       return !gpio_get_value(GPIO3_PALMLD_USB_DETECT_N);
> >  }
> > 
> >  static void power_supply_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMLD_USB_DETECT_N);
> > -       gpio_free(GPIO_NR_PALMLD_POWER_DETECT);
> > +       gpio_free(GPIO3_PALMLD_USB_DETECT_N);
> > +       gpio_free(GPIO4_PALMLD_POWER_DETECT);
> >  }
> > 
> >  static char *palmld_supplicants[] = {
> > @@ -413,7 +413,7 @@ static pxa2xx_audio_ops_t palmld_ac97_pdata = {
> >  };
> > 
> >  static struct palm27x_asoc_info palmld_asoc_pdata = {
> > -       .jack_gpio      = GPIO_NR_PALMLD_EARPHONE_DETECT,
> > +       .jack_gpio      = GPIO13_PALMLD_EARPHONE_DETECT,
> >  };
> > 
> >  static struct platform_device palmld_asoc = {
> > diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
> > index 0b36d7d..8037cfc 100644
> > --- a/arch/arm/mach-pxa/palmt5.c
> > +++ b/arch/arm/mach-pxa/palmt5.c
> > @@ -107,9 +107,9 @@ static unsigned long palmt5_pin_config[] __initdata =
> > {
> > ************************************************************************
> > ******/ static struct pxamci_platform_data palmt5_mci_platform_data = {
> > .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
> > -       .gpio_card_detect       = GPIO_NR_PALMT5_SD_DETECT_N,
> > -       .gpio_card_ro           = GPIO_NR_PALMT5_SD_READONLY,
> > -       .gpio_power             = GPIO_NR_PALMT5_SD_POWER,
> > +       .gpio_card_detect       = GPIO14_PALMT5_SD_DETECT_N,
> > +       .gpio_card_ro           = GPIO115_PALMT5_SD_READONLY,
> > +       .gpio_power             = GPIO114_PALMT5_SD_POWER,
> >        .detect_delay_ms        = 200,
> >  };
> > 
> > @@ -145,7 +145,7 @@ static struct pxa27x_keypad_platform_data
> > palmt5_keypad_platform_data = { * GPIO keys
> >  ************************************************************************
> > ******/ static struct gpio_keys_button palmt5_pxa_buttons[] = {
> > -       {KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> > +       {KEY_F8, GPIO10_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> >  };
> > 
> >  static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
> > @@ -168,39 +168,39 @@ static int palmt5_backlight_init(struct device
> > *dev) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
> > +       ret = gpio_request(GPIO84_PALMT5_BL_POWER, "BL POWER");
> >        if (ret)
> >                goto err;
> > -       ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
> > +       ret = gpio_direction_output(GPIO84_PALMT5_BL_POWER, 0);
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
> > +       ret = gpio_request(GPIO96_PALMT5_LCD_POWER, "LCD POWER");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
> > +       ret = gpio_direction_output(GPIO96_PALMT5_LCD_POWER, 0);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> >  err3:
> > -       gpio_free(GPIO_NR_PALMT5_LCD_POWER);
> > +       gpio_free(GPIO96_PALMT5_LCD_POWER);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMT5_BL_POWER);
> > +       gpio_free(GPIO84_PALMT5_BL_POWER);
> >  err:
> >        return ret;
> >  }
> > 
> >  static int palmt5_backlight_notify(struct device *dev, int brightness)
> >  {
> > -       gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
> > -       gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
> > +       gpio_set_value(GPIO84_PALMT5_BL_POWER, brightness);
> > +       gpio_set_value(GPIO96_PALMT5_LCD_POWER, brightness);
> >        return brightness;
> >  }
> > 
> >  static void palmt5_backlight_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMT5_BL_POWER);
> > -       gpio_free(GPIO_NR_PALMT5_LCD_POWER);
> > +       gpio_free(GPIO84_PALMT5_BL_POWER);
> > +       gpio_free(GPIO96_PALMT5_LCD_POWER);
> >  }
> > 
> >  static struct platform_pwm_backlight_data palmt5_backlight_data = {
> > @@ -225,7 +225,7 @@ static struct platform_device palmt5_backlight = {
> >  * IrDA
> >  ************************************************************************
> > ******/ static struct pxaficp_platform_data palmt5_ficp_platform_data = {
> > -       .gpio_pwdown            = GPIO_NR_PALMT5_IR_DISABLE,
> > +       .gpio_pwdown            = GPIO40_PALMT5_IR_DISABLE,
> >        .transceiver_cap        = IR_SIRMODE | IR_OFF,
> >  };
> > 
> > @@ -233,9 +233,9 @@ static struct pxaficp_platform_data
> > palmt5_ficp_platform_data = { * UDC
> >  ************************************************************************
> > ******/ static struct gpio_vbus_mach_info palmt5_udc_info = {
> > -       .gpio_vbus              = GPIO_NR_PALMT5_USB_DETECT_N,
> > +       .gpio_vbus              = GPIO15_PALMT5_USB_DETECT_N,
> >        .gpio_vbus_inverted     = 1,
> > -       .gpio_pullup            = GPIO_NR_PALMT5_USB_PULLUP,
> > +       .gpio_pullup            = GPIO93_PALMT5_USB_PULLUP,
> >  };
> > 
> >  static struct platform_device palmt5_gpio_vbus = {
> > @@ -253,28 +253,28 @@ static int power_supply_init(struct device *dev)
> >  {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT,
> > "CABLE_STATE_AC"); +       ret =
> > gpio_request(GPIO90_PALMT5_POWER_DETECT, "CABLE_STATE_AC"); if (ret)
> >                goto err1;
> > -       ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
> > +       ret = gpio_direction_input(GPIO90_PALMT5_POWER_DETECT);
> >        if (ret)
> >                goto err2;
> > 
> >        return 0;
> >  err2:
> > -       gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
> > +       gpio_free(GPIO90_PALMT5_POWER_DETECT);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static int palmt5_is_ac_online(void)
> >  {
> > -       return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
> > +       return gpio_get_value(GPIO90_PALMT5_POWER_DETECT);
> >  }
> > 
> >  static void power_supply_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
> > +       gpio_free(GPIO90_PALMT5_POWER_DETECT);
> >  }
> > 
> >  static char *palmt5_supplicants[] = {
> > @@ -324,7 +324,7 @@ static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
> >  };
> > 
> >  static struct palm27x_asoc_info palmt5_asoc_pdata = {
> > -       .jack_gpio      = GPIO_NR_PALMT5_EARPHONE_DETECT,
> > +       .jack_gpio      = GPIO107_PALMT5_EARPHONE_DETECT,
> >  };
> > 
> >  static struct platform_device palmt5_asoc = {
> > @@ -392,9 +392,9 @@ static struct platform_device *devices[] __initdata =
> > { /* setup udc GPIOs initial state */
> >  static void __init palmt5_udc_init(void)
> >  {
> > -       if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
> > -               gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
> > -               gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
> > +       if (!gpio_request(GPIO93_PALMT5_USB_PULLUP, "UDC Vbus")) {
> > +               gpio_direction_output(GPIO93_PALMT5_USB_PULLUP, 1);
> > +               gpio_free(GPIO93_PALMT5_USB_PULLUP);
> >        }
> >  }
> > 
> > diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
> > index a5429cd..a835034 100644
> > --- a/arch/arm/mach-pxa/palmtx.c
> > +++ b/arch/arm/mach-pxa/palmtx.c
> > @@ -167,9 +167,9 @@ static struct platform_device palmtx_flash = {
> >  ************************************************************************
> > ******/ static struct pxamci_platform_data palmtx_mci_platform_data = {
> > .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
> > -       .gpio_card_detect       = GPIO_NR_PALMTX_SD_DETECT_N,
> > -       .gpio_card_ro           = GPIO_NR_PALMTX_SD_READONLY,
> > -       .gpio_power             = GPIO_NR_PALMTX_SD_POWER,
> > +       .gpio_card_detect       = GPIO14_PALMTX_SD_DETECT_N,
> > +       .gpio_card_ro           = GPIO115_PALMTX_SD_READONLY,
> > +       .gpio_power             = GPIO114_PALMTX_SD_POWER,
> >        .detect_delay_ms        = 200,
> >  };
> > 
> > @@ -205,7 +205,7 @@ static struct pxa27x_keypad_platform_data
> > palmtx_keypad_platform_data = { * GPIO keys
> >  ************************************************************************
> > ******/ static struct gpio_keys_button palmtx_pxa_buttons[] = {
> > -       {KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> > +       {KEY_F8, GPIO10_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
> >  };
> > 
> >  static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
> > @@ -228,39 +228,39 @@ static int palmtx_backlight_init(struct device
> > *dev) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
> > +       ret = gpio_request(GPIO84_PALMTX_BL_POWER, "BL POWER");
> >        if (ret)
> >                goto err;
> > -       ret = gpio_direction_output(GPIO_NR_PALMTX_BL_POWER, 0);
> > +       ret = gpio_direction_output(GPIO84_PALMTX_BL_POWER, 0);
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
> > +       ret = gpio_request(GPIO96_PALMTX_LCD_POWER, "LCD POWER");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMTX_LCD_POWER, 0);
> > +       ret = gpio_direction_output(GPIO96_PALMTX_LCD_POWER, 0);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> >  err3:
> > -       gpio_free(GPIO_NR_PALMTX_LCD_POWER);
> > +       gpio_free(GPIO96_PALMTX_LCD_POWER);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMTX_BL_POWER);
> > +       gpio_free(GPIO84_PALMTX_BL_POWER);
> >  err:
> >        return ret;
> >  }
> > 
> >  static int palmtx_backlight_notify(struct device *dev, int brightness)
> >  {
> > -       gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
> > -       gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
> > +       gpio_set_value(GPIO84_PALMTX_BL_POWER, brightness);
> > +       gpio_set_value(GPIO96_PALMTX_LCD_POWER, brightness);
> >        return brightness;
> >  }
> > 
> >  static void palmtx_backlight_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMTX_BL_POWER);
> > -       gpio_free(GPIO_NR_PALMTX_LCD_POWER);
> > +       gpio_free(GPIO84_PALMTX_BL_POWER);
> > +       gpio_free(GPIO96_PALMTX_LCD_POWER);
> >  }
> > 
> >  static struct platform_pwm_backlight_data palmtx_backlight_data = {
> > @@ -285,7 +285,7 @@ static struct platform_device palmtx_backlight = {
> >  * IrDA
> >  ************************************************************************
> > ******/ static struct pxaficp_platform_data palmtx_ficp_platform_data = {
> > -       .gpio_pwdown            = GPIO_NR_PALMTX_IR_DISABLE,
> > +       .gpio_pwdown            = GPIO40_PALMTX_IR_DISABLE,
> >        .transceiver_cap        = IR_SIRMODE | IR_OFF,
> >  };
> > 
> > @@ -293,9 +293,9 @@ static struct pxaficp_platform_data
> > palmtx_ficp_platform_data = { * UDC
> >  ************************************************************************
> > ******/ static struct gpio_vbus_mach_info palmtx_udc_info = {
> > -       .gpio_vbus              = GPIO_NR_PALMTX_USB_DETECT_N,
> > +       .gpio_vbus              = GPIO13_PALMTX_USB_DETECT_N,
> >        .gpio_vbus_inverted     = 1,
> > -       .gpio_pullup            = GPIO_NR_PALMTX_USB_PULLUP,
> > +       .gpio_pullup            = GPIO93_PALMTX_USB_PULLUP,
> >  };
> > 
> >  static struct platform_device palmtx_gpio_vbus = {
> > @@ -313,29 +313,29 @@ static int power_supply_init(struct device *dev)
> >  {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT,
> > "CABLE_STATE_AC"); +       ret =
> > gpio_request(GPIO12_PALMTX_POWER_DETECT, "CABLE_STATE_AC"); if (ret)
> >                goto err1;
> > -       ret = gpio_direction_input(GPIO_NR_PALMTX_POWER_DETECT);
> > +       ret = gpio_direction_input(GPIO12_PALMTX_POWER_DETECT);
> >        if (ret)
> >                goto err2;
> > 
> >        return 0;
> > 
> >  err2:
> > -       gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
> > +       gpio_free(GPIO12_PALMTX_POWER_DETECT);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static int palmtx_is_ac_online(void)
> >  {
> > -       return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
> > +       return gpio_get_value(GPIO12_PALMTX_POWER_DETECT);
> >  }
> > 
> >  static void power_supply_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
> > +       gpio_free(GPIO12_PALMTX_POWER_DETECT);
> >  }
> > 
> >  static char *palmtx_supplicants[] = {
> > @@ -385,7 +385,7 @@ static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
> >  };
> > 
> >  static struct palm27x_asoc_info palmtx_asoc_pdata = {
> > -       .jack_gpio      = GPIO_NR_PALMTX_EARPHONE_DETECT,
> > +       .jack_gpio      = GPIO107_PALMTX_EARPHONE_DETECT,
> >  };
> > 
> >  static struct platform_device palmtx_asoc = {
> > @@ -542,9 +542,9 @@ static void __init palmtx_map_io(void)
> >  /* setup udc GPIOs initial state */
> >  static void __init palmtx_udc_init(void)
> >  {
> > -       if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
> > -               gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
> > -               gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
> > +       if (!gpio_request(GPIO93_PALMTX_USB_PULLUP, "UDC Vbus")) {
> > +               gpio_direction_output(GPIO93_PALMTX_USB_PULLUP, 1);
> > +               gpio_free(GPIO93_PALMTX_USB_PULLUP);
> >        }
> >  }
> > 
> > diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
> > index b78c6b4..91bc5a3 100644
> > --- a/arch/arm/mach-pxa/palmz72.c
> > +++ b/arch/arm/mach-pxa/palmz72.c
> > @@ -115,9 +115,9 @@ static unsigned long palmz72_pin_config[] __initdata
> > = { * select, i.e. it is inverted */
> >  static struct pxamci_platform_data palmz72_mci_platform_data = {
> >        .ocr_mask               = MMC_VDD_32_33 | MMC_VDD_33_34,
> > -       .gpio_card_detect       = GPIO_NR_PALMZ72_SD_DETECT_N,
> > -       .gpio_card_ro           = GPIO_NR_PALMZ72_SD_RO,
> > -       .gpio_power             = GPIO_NR_PALMZ72_SD_POWER_N,
> > +       .gpio_card_detect       = GPIO14_PALMZ72_SD_DETECT_N,
> > +       .gpio_card_ro           = GPIO115_PALMZ72_SD_RO,
> > +       .gpio_power             = GPIO98_PALMZ72_SD_POWER_N,
> >        .gpio_power_invert      = 1,
> >  };
> > 
> > @@ -156,39 +156,39 @@ static int palmz72_backlight_init(struct device
> > *dev) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
> > +       ret = gpio_request(GPIO20_PALMZ72_BL_POWER, "BL POWER");
> >        if (ret)
> >                goto err;
> > -       ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
> > +       ret = gpio_direction_output(GPIO20_PALMZ72_BL_POWER, 0);
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
> > +       ret = gpio_request(GPIO96_PALMZ72_LCD_POWER, "LCD POWER");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
> > +       ret = gpio_direction_output(GPIO96_PALMZ72_LCD_POWER, 0);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> >  err3:
> > -       gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
> > +       gpio_free(GPIO96_PALMZ72_LCD_POWER);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMZ72_BL_POWER);
> > +       gpio_free(GPIO20_PALMZ72_BL_POWER);
> >  err:
> >        return ret;
> >  }
> > 
> >  static int palmz72_backlight_notify(struct device *dev, int brightness)
> >  {
> > -       gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
> > -       gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
> > +       gpio_set_value(GPIO20_PALMZ72_BL_POWER, brightness);
> > +       gpio_set_value(GPIO96_PALMZ72_LCD_POWER, brightness);
> >        return brightness;
> >  }
> > 
> >  static void palmz72_backlight_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMZ72_BL_POWER);
> > -       gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
> > +       gpio_free(GPIO20_PALMZ72_BL_POWER);
> > +       gpio_free(GPIO96_PALMZ72_LCD_POWER);
> >  }
> > 
> >  static struct platform_pwm_backlight_data palmz72_backlight_data = {
> > @@ -213,7 +213,7 @@ static struct platform_device palmz72_backlight = {
> >  * IrDA
> >  ************************************************************************
> > ******/ static struct pxaficp_platform_data palmz72_ficp_platform_data =
> > { -       .gpio_pwdown            = GPIO_NR_PALMZ72_IR_DISABLE,
> > +       .gpio_pwdown            = GPIO49_PALMZ72_IR_DISABLE,
> >        .transceiver_cap        = IR_SIRMODE | IR_OFF,
> >  };
> > 
> > @@ -224,7 +224,7 @@ static struct gpio_led gpio_leds[] = {
> >        {
> >                .name                   = "palmz72:green:led",
> >                .default_trigger        = "none",
> > -               .gpio                   = GPIO_NR_PALMZ72_LED_GREEN,
> > +               .gpio                   = GPIO88_PALMZ72_LED_GREEN,
> >        },
> >  };
> > 
> > @@ -245,8 +245,8 @@ static struct platform_device palmz72_leds = {
> >  * UDC
> >  ************************************************************************
> > ******/ static struct gpio_vbus_mach_info palmz72_udc_info = {
> > -       .gpio_vbus              = GPIO_NR_PALMZ72_USB_DETECT_N,
> > -       .gpio_pullup            = GPIO_NR_PALMZ72_USB_PULLUP,
> > +       .gpio_vbus              = GPIO15_PALMZ72_USB_DETECT_N,
> > +       .gpio_pullup            = GPIO95_PALMZ72_USB_PULLUP,
> >  };
> > 
> >  static struct platform_device palmz72_gpio_vbus = {
> > @@ -264,43 +264,43 @@ static int power_supply_init(struct device *dev)
> >  {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT,
> > "CABLE_STATE_AC"); +       ret =
> > gpio_request(GPIO0_PALMZ72_POWER_DETECT, "CABLE_STATE_AC"); if (ret)
> >                goto err1;
> > -       ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
> > +       ret = gpio_direction_input(GPIO0_PALMZ72_POWER_DETECT);
> >        if (ret)
> >                goto err2;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N,
> > "CABLE_STATE_USB"); +       ret =
> > gpio_request(GPIO15_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB"); if (ret)
> >                goto err2;
> > -       ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
> > +       ret = gpio_direction_input(GPIO15_PALMZ72_USB_DETECT_N);
> >        if (ret)
> >                goto err3;
> > 
> >        return 0;
> >  err3:
> > -       gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
> > +       gpio_free(GPIO15_PALMZ72_USB_DETECT_N);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
> > +       gpio_free(GPIO0_PALMZ72_POWER_DETECT);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static int palmz72_is_ac_online(void)
> >  {
> > -       return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
> > +       return gpio_get_value(GPIO0_PALMZ72_POWER_DETECT);
> >  }
> > 
> >  static int palmz72_is_usb_online(void)
> >  {
> > -       return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
> > +       return !gpio_get_value(GPIO15_PALMZ72_USB_DETECT_N);
> >  }
> > 
> >  static void power_supply_exit(struct device *dev)
> >  {
> > -       gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
> > -       gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
> > +       gpio_free(GPIO15_PALMZ72_USB_DETECT_N);
> > +       gpio_free(GPIO0_PALMZ72_POWER_DETECT);
> >  }
> > 
> >  static char *palmz72_supplicants[] = {
> > @@ -468,9 +468,9 @@ static struct platform_device *devices[] __initdata =
> > { /* setup udc GPIOs initial state */
> >  static void __init palmz72_udc_init(void)
> >  {
> > -       if (!gpio_request(GPIO_NR_PALMZ72_USB_PULLUP, "USB Pullup")) {
> > -               gpio_direction_output(GPIO_NR_PALMZ72_USB_PULLUP, 0);
> > -               gpio_free(GPIO_NR_PALMZ72_USB_PULLUP);
> > +       if (!gpio_request(GPIO95_PALMZ72_USB_PULLUP, "USB Pullup")) {
> > +               gpio_direction_output(GPIO95_PALMZ72_USB_PULLUP, 0);
> > +               gpio_free(GPIO95_PALMZ72_USB_PULLUP);
> >        }
> >  }
> > 
> > diff --git a/configs/config-colibri b/configs/config-colibri
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-income b/configs/config-income
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-littleton b/configs/config-littleton
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-vpac270 b/configs/config-vpac270
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-vpac270-minimal
> > b/configs/config-vpac270-minimal new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-zaurus b/configs/config-zaurus
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/configs/config-zipitz2 b/configs/config-zipitz2
> > new file mode 100644
> > index 0000000..e69de29
> > diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c
> > index 11fb4cc..7ca74d6 100644
> > --- a/drivers/ata/pata_palmld.c
> > +++ b/drivers/ata/pata_palmld.c
> > @@ -61,24 +61,24 @@ static __devinit int palmld_pata_probe(struct
> > platform_device *pdev) return -ENOMEM;
> > 
> >        /* request and activate power GPIO, IRQ GPIO */
> > -       ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
> > +       ret = gpio_request(GPIO115_PALMLD_IDE_PWEN, "HDD PWR");
> >        if (ret)
> >                goto err1;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
> > +       ret = gpio_direction_output(GPIO115_PALMLD_IDE_PWEN, 1);
> >        if (ret)
> >                goto err2;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
> > +       ret = gpio_request(GPIO98_PALMLD_IDE_RESET, "HDD RST");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
> > +       ret = gpio_direction_output(GPIO98_PALMLD_IDE_RESET, 0);
> >        if (ret)
> >                goto err3;
> > 
> >        /* reset the drive */
> > -       gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
> > +       gpio_set_value(GPIO98_PALMLD_IDE_RESET, 0);
> >        msleep(30);
> > -       gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
> > +       gpio_set_value(GPIO98_PALMLD_IDE_RESET, 1);
> >        msleep(30);
> > 
> >        /* setup the ata port */
> > @@ -100,9 +100,9 @@ static __devinit int palmld_pata_probe(struct
> > platform_device *pdev) &palmld_sht);
> > 
> >  err3:
> > -       gpio_free(GPIO_NR_PALMLD_IDE_RESET);
> > +       gpio_free(GPIO98_PALMLD_IDE_RESET);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
> > +       gpio_free(GPIO115_PALMLD_IDE_PWEN);
> >  err1:
> >        return ret;
> >  }
> > @@ -114,10 +114,10 @@ static __devexit int palmld_pata_remove(struct
> > platform_device *dev) ata_host_detach(host);
> > 
> >        /* power down the HDD */
> > -       gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
> > +       gpio_set_value(GPIO115_PALMLD_IDE_PWEN, 0);
> > 
> > -       gpio_free(GPIO_NR_PALMLD_IDE_RESET);
> > -       gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
> > +       gpio_free(GPIO98_PALMLD_IDE_RESET);
> > +       gpio_free(GPIO115_PALMLD_IDE_PWEN);
> > 
> >        return 0;
> >  }
> > diff --git a/drivers/pcmcia/pxa2xx_palmld.c
> > b/drivers/pcmcia/pxa2xx_palmld.c index 6fb6f7f..4317657 100644
> > --- a/drivers/pcmcia/pxa2xx_palmld.c
> > +++ b/drivers/pcmcia/pxa2xx_palmld.c
> > @@ -24,52 +24,52 @@ static int palmld_pcmcia_hw_init(struct
> > soc_pcmcia_socket *skt) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
> > +       ret = gpio_request(GPIO36_PALMLD_PCMCIA_POWER, "PCMCIA PWR");
> >        if (ret)
> >                goto err1;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_POWER, 0);
> > +       ret = gpio_direction_output(GPIO36_PALMLD_PCMCIA_POWER, 0);
> >        if (ret)
> >                goto err2;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_RESET, "PCMCIA RST");
> > +       ret = gpio_request(GPIO81_PALMLD_PCMCIA_RESET, "PCMCIA RST");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMLD_PCMCIA_RESET, 1);
> > +       ret = gpio_direction_output(GPIO81_PALMLD_PCMCIA_RESET, 1);
> >        if (ret)
> >                goto err3;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMLD_PCMCIA_READY, "PCMCIA RDY");
> > +       ret = gpio_request(GPIO38_PALMLD_PCMCIA_READY, "PCMCIA RDY");
> >        if (ret)
> >                goto err3;
> > -       ret = gpio_direction_input(GPIO_NR_PALMLD_PCMCIA_READY);
> > +       ret = gpio_direction_input(GPIO38_PALMLD_PCMCIA_READY);
> >        if (ret)
> >                goto err4;
> > 
> > -       skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
> > +       skt->socket.pci_irq = IRQ_GPIO(GPIO38_PALMLD_PCMCIA_READY);
> >        return 0;
> > 
> >  err4:
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
> > +       gpio_free(GPIO38_PALMLD_PCMCIA_READY);
> >  err3:
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
> > +       gpio_free(GPIO81_PALMLD_PCMCIA_RESET);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
> > +       gpio_free(GPIO36_PALMLD_PCMCIA_POWER);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
> >  {
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_READY);
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_RESET);
> > -       gpio_free(GPIO_NR_PALMLD_PCMCIA_POWER);
> > +       gpio_free(GPIO38_PALMLD_PCMCIA_READY);
> > +       gpio_free(GPIO81_PALMLD_PCMCIA_RESET);
> > +       gpio_free(GPIO36_PALMLD_PCMCIA_POWER);
> >  }
> > 
> >  static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
> >                                        struct pcmcia_state *state)
> >  {
> >        state->detect = 1; /* always inserted */
> > -       state->ready  = !!gpio_get_value(GPIO_NR_PALMLD_PCMCIA_READY);
> > +       state->ready  = !!gpio_get_value(GPIO38_PALMLD_PCMCIA_READY);
> >        state->bvd1   = 1;
> >        state->bvd2   = 1;
> >        state->wrprot = 0;
> > @@ -80,8 +80,8 @@ static void palmld_pcmcia_socket_state(struct
> > soc_pcmcia_socket *skt, static int palmld_pcmcia_configure_socket(struct
> > soc_pcmcia_socket *skt, const socket_state_t *state) {
> > -       gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1);
> > -       gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET,
> > +       gpio_set_value(GPIO36_PALMLD_PCMCIA_POWER, 1);
> > +       gpio_set_value(GPIO81_PALMLD_PCMCIA_RESET,
> >                        !!(state->flags & SS_RESET));
> > 
> >        return 0;
> > diff --git a/drivers/pcmcia/pxa2xx_palmtx.c
> > b/drivers/pcmcia/pxa2xx_palmtx.c index b07b247..cc80531 100644
> > --- a/drivers/pcmcia/pxa2xx_palmtx.c
> > +++ b/drivers/pcmcia/pxa2xx_palmtx.c
> > @@ -25,62 +25,62 @@ static int palmtx_pcmcia_hw_init(struct
> > soc_pcmcia_socket *skt) {
> >        int ret;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
> > +       ret = gpio_request(GPIO94_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1");
> >        if (ret)
> >                goto err1;
> > -       ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0);
> > +       ret = gpio_direction_output(GPIO94_PALMTX_PCMCIA_POWER1, 0);
> >        if (ret)
> >                goto err2;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
> > +       ret = gpio_request(GPIO108_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2");
> >        if (ret)
> >                goto err2;
> > -       ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0);
> > +       ret = gpio_direction_output(GPIO108_PALMTX_PCMCIA_POWER2, 0);
> >        if (ret)
> >                goto err3;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST");
> > +       ret = gpio_request(GPIO79_PALMTX_PCMCIA_RESET, "PCMCIA RST");
> >        if (ret)
> >                goto err3;
> > -       ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1);
> > +       ret = gpio_direction_output(GPIO79_PALMTX_PCMCIA_RESET, 1);
> >        if (ret)
> >                goto err4;
> > 
> > -       ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY");
> > +       ret = gpio_request(GPIO116_PALMTX_PCMCIA_READY, "PCMCIA RDY");
> >        if (ret)
> >                goto err4;
> > -       ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY);
> > +       ret = gpio_direction_input(GPIO116_PALMTX_PCMCIA_READY);
> >        if (ret)
> >                goto err5;
> > 
> > -       skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY);
> > +       skt->socket.pci_irq = gpio_to_irq(GPIO116_PALMTX_PCMCIA_READY);
> >        return 0;
> > 
> >  err5:
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
> > +       gpio_free(GPIO116_PALMTX_PCMCIA_READY);
> >  err4:
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
> > +       gpio_free(GPIO79_PALMTX_PCMCIA_RESET);
> >  err3:
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
> > +       gpio_free(GPIO108_PALMTX_PCMCIA_POWER2);
> >  err2:
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
> > +       gpio_free(GPIO94_PALMTX_PCMCIA_POWER1);
> >  err1:
> >        return ret;
> >  }
> > 
> >  static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
> >  {
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_READY);
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET);
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2);
> > -       gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1);
> > +       gpio_free(GPIO116_PALMTX_PCMCIA_READY);
> > +       gpio_free(GPIO79_PALMTX_PCMCIA_RESET);
> > +       gpio_free(GPIO108_PALMTX_PCMCIA_POWER2);
> > +       gpio_free(GPIO94_PALMTX_PCMCIA_POWER1);
> >  }
> > 
> >  static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
> >                                        struct pcmcia_state *state)
> >  {
> >        state->detect = 1; /* always inserted */
> > -       state->ready  = !!gpio_get_value(GPIO_NR_PALMTX_PCMCIA_READY);
> > +       state->ready  = !!gpio_get_value(GPIO116_PALMTX_PCMCIA_READY);
> >        state->bvd1   = 1;
> >        state->bvd2   = 1;
> >        state->wrprot = 0;
> > @@ -92,9 +92,9 @@ static int
> >  palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
> >                                const socket_state_t *state)
> >  {
> > -       gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1);
> > -       gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1);
> > -       gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET,
> > +       gpio_set_value(GPIO94_PALMTX_PCMCIA_POWER1, 1);
> > +       gpio_set_value(GPIO108_PALMTX_PCMCIA_POWER2, 1);
> > +       gpio_set_value(GPIO79_PALMTX_PCMCIA_RESET,
> >                        !!(state->flags & SS_RESET));
> > 
> >        return 0;
> > --
> > 1.7.1



More information about the linux-arm-kernel mailing list