[PATCH 04/19] s3c-fb: only init window colour key controls for windows with blending

Pawel Osciak p.osciak at samsung.com
Fri Jul 9 04:49:52 EDT 2010


From: Ben Dooks <ben-linux at fluff.org>

The driver clears all windows, but also sets the windows' colour key
controls at the same time. However, the last window does not have these
registers as it is always blended into the previous window.

Move the colour key initialisation into the probe, and run it for only
nr_win-1 windows.

Signed-off-by: Ben Dooks <ben-linux at fluff.org>
Signed-off-by: Pawel Osciak <p.osciak at samsung.com>
---
 drivers/video/s3c-fb.c |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index 9c46f95..f9d0170 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -845,9 +845,6 @@ static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
 	void __iomem *regs = sfb->regs;
 
 	writel(0, regs + WINCON(win));
-	writel(0xffffff, regs + WxKEYCONy(win, 0));
-	writel(0xffffff, regs + WxKEYCONy(win, 1));
-
 	writel(0, regs + VIDOSD_A(win));
 	writel(0, regs + VIDOSD_B(win));
 	writel(0, regs + VIDOSD_C(win));
@@ -920,6 +917,12 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 	for (win = 0; win < S3C_FB_MAX_WIN; win++)
 		s3c_fb_clear_win(sfb, win);
 
+	/* initialise colour key controls */
+	for (win = 0; win < (S3C_FB_MAX_WIN - 1); win++) {
+		writel(0xffffff, sfb->regs + WxKEYCONy(win, 0));
+		writel(0xffffff, sfb->regs + WxKEYCONy(win, 1));
+	}
+
 	/* we have the register setup, start allocating framebuffers */
 
 	for (win = 0; win < S3C_FB_MAX_WIN; win++) {
@@ -1020,6 +1023,11 @@ static int s3c_fb_resume(struct platform_device *pdev)
 	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
 		s3c_fb_clear_win(sfb, win_no);
 
+	for (win_no = 0; win_no < S3C_FB_MAX_WIN - 1; win_no++) {
+		writel(0xffffff, sfb->regs + WxKEYCONy(win_no, 1));
+		writel(0xffffff, sfb->regs + WxKEYCONy(win_no, 1));
+	}
+
 	/* restore framebuffers */
 	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
 		win = sfb->windows[win_no];
-- 
1.7.1.569.g6f426




More information about the linux-arm-kernel mailing list