[PATCH 11/15] wireless: wl1271: introduce platform device support

[Roger Quadros]

Hi Ohad,

On 07/08/2010 11:10 PM, ext Ohad Ben-Cohen wrote:
> Hi Nicolas and Roger,
>
> On Tue, Jul 6, 2010 at 8:42 PM, Nicolas Pitre<nico at fluxnic.net>  wrote:
>> On Tue, 6 Jul 2010, Roger Quadros wrote:
>>> If the Power enable GPIO can be treated as SDIO slot supply (i.e. vmmc), then
>>> the SDIO/MMC core should tackle it, just like it deals with supply for slots
>>> with removable cards.
>>
> ...
>> Another function pair would be needed instead, which would do almost
>> like the suspend/resume code is already doing.  Something like:
>
> Thanks a lot for your review and comments, and for taking the time to
> present your approach.

you're welcome :)
>
> I like it !
>
> It'd allow us to lose the software (or fake if you want ;) card detect
> mechanism, which is something that should have been added to each
> platform we wanted to support.
>
> We would only need to make it possible to deliver board-specific data
> to the function driver (e.g., in the case of the wl1271, we need irq
> and board_ref_clock data).  That would require some board-level
> platform-data configuration, which will be specific to the controller
> to which the device is hardwired to. This data should propagate
> through the host controller to the SDIO core so it would eventually be

why should platform data go through the host controller? You are already 
creating a new platform device for wl1271_sdio just to pass platform_data so the 
platform data for that can be passed directly from board files to this platform 
device. It doesn't need to go via host controller.

I think this case is specific to wl1271. Ideally wl1271 should have used the 
SDIO's in-band interrupt delivery mechanism and SDIO Configuration space to 
provide this information to make it truly plug n play.

br,
-roger