[PATCH 07/13] omap3: introduce omap3_map_io
Tony Lindgren
tony at atomide.com
Thu Jul 8 09:54:51 EDT 2010
From: Mike Rapoport <mike at compulab.co.il>
Most OMAP3-based boards use exactly the same code for .map_io method in
the machine_desc structure.
This patch introduces omap3_map_io and updates board-* files to use it
as .map_io method.
Signed-off-by: Mike Rapoport <mike at compulab.co.il>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 8 +-------
arch/arm/mach-omap2/board-3630sdp.c | 8 +-------
arch/arm/mach-omap2/board-am3517evm.c | 8 +-------
arch/arm/mach-omap2/board-cm-t35.c | 8 +-------
arch/arm/mach-omap2/board-devkit8000.c | 8 +-------
arch/arm/mach-omap2/board-igep0020.c | 8 +-------
arch/arm/mach-omap2/board-ldp.c | 8 +-------
arch/arm/mach-omap2/board-omap3beagle.c | 8 +-------
arch/arm/mach-omap2/board-omap3evm.c | 8 +-------
arch/arm/mach-omap2/board-omap3pandora.c | 8 +-------
arch/arm/mach-omap2/board-omap3stalker.c | 8 +-------
arch/arm/mach-omap2/board-omap3touchbook.c | 8 +-------
arch/arm/mach-omap2/board-overo.c | 8 +-------
arch/arm/mach-omap2/board-zoom2.c | 8 +-------
arch/arm/mach-omap2/board-zoom3.c | 8 +-------
arch/arm/plat-omap/common.c | 6 ++++++
arch/arm/plat-omap/include/plat/common.h | 2 ++
17 files changed, 23 insertions(+), 105 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index e3c2ffd..e51f8e3 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -803,18 +803,12 @@ static void __init omap_3430sdp_init(void)
usb_ehci_init(&ehci_pdata);
}
-static void __init omap_3430sdp_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap_3430sdp_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap_3430sdp_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 1942951..8b7c2f9 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -65,12 +65,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.reset_gpio_port[2] = -EINVAL
};
-static void __init omap_sdp_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static struct omap_board_config_kernel sdp_config[] __initdata = {
};
@@ -106,7 +100,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap_sdp_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap_sdp_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f326d59..bbfdc6e 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -461,17 +461,11 @@ static void __init am3517_evm_init(void)
am3517_evm_ethernet_init(&am3517_evm_emac_pdata);
}
-static void __init am3517_evm_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = am3517_evm_map_io,
+ .map_io = omap3_map_io,
.init_irq = am3517_evm_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 6692ba0..79d6b15 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -708,12 +708,6 @@ static void __init cm_t35_init_irq(void)
omap_gpio_init();
}
-static void __init cm_t35_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static struct omap_board_mux board_mux[] __initdata = {
/* nCS and IRQ for CM-T35 ethernet */
OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
@@ -836,7 +830,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = cm_t35_map_io,
+ .map_io = omap3_map_io,
.init_irq = cm_t35_init_irq,
.init_machine = cm_t35_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 461635b..19da458 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -808,17 +808,11 @@ static void __init devkit8000_init(void)
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
-static void __init devkit8000_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = devkit8000_map_io,
+ .map_io = omap3_map_io,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 7eefbc3..b26319c 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -532,17 +532,11 @@ static void __init igep2_init(void)
pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
}
-static void __init igep2_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(IGEP0020, "IGEP v2 board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = igep2_map_io,
+ .map_io = omap3_map_io,
.init_irq = igep2_init_irq,
.init_machine = igep2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f7c0a2a..6e3930e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -406,17 +406,11 @@ static void __init omap_ldp_init(void)
ldp_vmmc1_supply.dev = mmc[0].dev;
}
-static void __init omap_ldp_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP_LDP, "OMAP LDP board")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap_ldp_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap_ldp_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 518a3f7..64aa557 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -507,18 +507,12 @@ static void __init omap3_beagle_init(void)
beagle_display_init();
}
-static void __init omap3_beagle_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap3_beagle_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap3_beagle_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4056b3c..6cde29d 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -715,18 +715,12 @@ static void __init omap3_evm_init(void)
omap3_evm_display_init();
}
-static void __init omap3_evm_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap3_evm_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap3_evm_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 3c9a630..f3b7a8a 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -700,17 +700,11 @@ static void __init omap3pandora_init(void)
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
-static void __init omap3pandora_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap3pandora_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap3pandora_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 497d429..bcd01d2 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -652,18 +652,12 @@ static void __init omap3_stalker_init(void)
omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
}
-static void __init omap3_stalker_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg at ema-tech.com */
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap3_stalker_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap3_stalker_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index d34742e..820eaf1 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -559,18 +559,12 @@ static void __init omap3_touchbook_init(void)
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
-static void __init omap3_touchbook_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
.phys_io = 0x48000000,
.io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap3_touchbook_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 15b87fd..b6bc315 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -522,17 +522,11 @@ static void __init overo_init(void)
"OVERO_GPIO_USBH_CPEN\n");
}
-static void __init overo_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OVERO, "Gumstix Overo")
.phys_io = 0x48000000,
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = overo_map_io,
+ .map_io = omap3_map_io,
.init_irq = overo_init_irq,
.init_machine = overo_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 242b9d5..6fcefe9 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -97,17 +97,11 @@ static void __init omap_zoom2_init(void)
zoom_debugboard_init();
}
-static void __init omap_zoom2_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.phys_io = ZOOM_UART_BASE,
.io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap_zoom2_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap_zoom2_init_irq,
.init_machine = omap_zoom2_init,
.timer = &omap_timer,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
index 171efc1..6319776 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -25,12 +25,6 @@
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
-static void __init omap_zoom_map_io(void)
-{
- omap2_set_globals_3xxx();
- omap34xx_map_common_io();
-}
-
static struct omap_board_config_kernel zoom_config[] __initdata = {
};
@@ -89,7 +83,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.phys_io = ZOOM_UART_BASE,
.io_pg_offst = (ZOOM_UART_VIRT >> 18) & 0xfffc,
.boot_params = 0x80000100,
- .map_io = omap_zoom_map_io,
+ .map_io = omap3_map_io,
.init_irq = omap_zoom_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 5d9b0ca..5083672 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -316,6 +316,12 @@ void __init omap2_set_globals_3xxx(void)
{
__omap2_set_globals(&omap3_globals);
}
+
+void __init omap3_map_io(void)
+{
+ omap2_set_globals_3xxx();
+ omap34xx_map_common_io();
+}
#endif
#if defined(CONFIG_ARCH_OMAP4)
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 13d0cf9..bc8e3e0 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -66,6 +66,8 @@ void omap2_set_globals_control(struct omap_globals *);
void omap2_set_globals_prcm(struct omap_globals *);
void omap2_set_globals_uart(struct omap_globals *);
+void omap3_map_io(void);
+
/**
* omap_test_timeout - busy-loop, testing a condition
* @cond: condition to test until it evaluates to true
More information about the linux-arm-kernel
mailing list