[PATCH v2 2/2] S5PV210: Add MIPI-DSI Driver.
InKi Dae
inki.dae at samsung.com
Wed Jul 7 02:42:41 EDT 2010
this patch addes MIPI-DSI Driver.
to use this driver, some structures below should be added to machine
specific file.
struct dsim_config
- define clock info, data lane count and video mode info for MIPI-DSI
Controller.
struct dsim_lcd_config
- define interface mode, channel ID, Pixel format and so on.
struct s5p_platform_dsim
- define callbacks for initializing D-PHY, MIPI reset and trigger
releated interfaces of s3c-fb.c file.
struct mipi_ddi_platform_data
- define following callbacks.
- a function for transferring and receiving command data to mipi based
lcd panel.
- a function for getting framedone status of mipi-dsi controller.
- a function for clearing framedone interrupt of mipi-dsi controller.
- a function for checking i80 framedone status of display controller.(fimd)
- a function for triggering to display controller.(fimd)
Signed-off-by: InKi Dae <inki.dae at samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
---
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
index 2a25ab4..f716678 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h
@@ -162,6 +162,7 @@
/* MIPI */
#define S5P_MIPI_DPHY_EN (3)
+#define S5P_MIPI_M_RESETN (1 << 1)
/* S5P_DAC_CONTROL */
#define S5P_DAC_ENABLE (1)
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index c9abae5..2f164dc 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -50,6 +50,9 @@ obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
+# Device setup - MIPI-DSI
+obj-$(CONFIG_S5P_MIPI_DSI) += setup-dsim.o
+
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
diff --git a/arch/arm/plat-samsung/include/plat/dsim.h b/arch/arm/plat-samsung/include/plat/dsim.h
new file mode 100644
index 0000000..9c1d6a3
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/dsim.h
@@ -0,0 +1,447 @@
+/* linux/arm/arch/mach-s5pc110/include/mach/dsim.h
+ *
+ * Platform data header for Samsung MIPI-DSIM.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _DSIM_H
+#define _DSIM_H
+
+#include <linux/device.h>
+
+/* h/w configuration */
+#define MIPI_FIN 24000000
+#define DSIM_TIMEOUT_MS 5000
+#define DSIM_NO_OF_INTERRUPT 26
+
+#define DSIM_TRUE 1
+#define DSIM_FALSE 0
+
+#define DSIM_HEADER_FIFO_SZ 16
+
+enum dsim_interface_type {
+ DSIM_COMMAND = 0,
+ DSIM_VIDEO = 1,
+};
+
+enum dsim_state {
+ DSIM_STATE_RESET = 0,
+ DSIM_STATE_INIT = 1,
+ DSIM_STATE_STOP = 2,
+ DSIM_STATE_HSCLKEN = 3,
+ DSIM_STATE_ULPS = 4,
+};
+
+enum dsim_virtual_ch_no {
+ DSIM_VIRTUAL_CH_0 = 0,
+ DSIM_VIRTUAL_CH_1 = 1,
+ DSIM_VIRTUAL_CH_2 = 2,
+ DSIM_VIRTUAL_CH_3 = 3,
+};
+
+enum dsim_video_mode_type {
+ DSIM_NON_BURST_SYNC_EVENT = 0,
+ DSIM_NON_BURST_SYNC_PULSE = 2,
+ DSIM_BURST = 3,
+ DSIM_NON_VIDEO_MODE = 4,
+};
+
+enum dsim_fifo_state {
+ DSIM_RX_DATA_FULL = (1 << 25),
+ DSIM_RX_DATA_EMPTY = (1 << 24),
+ SFR_HEADER_FULL = (1 << 23),
+ SFR_HEADER_EMPTY = (1 << 22),
+ SFR_PAYLOAD_FULL = (1 << 21),
+ SFR_PAYLOAD_EMPTY = (1 << 20),
+ I80_HEADER_FULL = (1 << 19),
+ I80_HEADER_EMPTY = (1 << 18),
+ I80_PALOAD_FULL = (1 << 17),
+ I80_PALOAD_EMPTY = (1 << 16),
+ SUB_DISP_HEADER_FULL = (1 << 15),
+ SUB_DISP_HEADER_EMPTY = (1 << 14),
+ SUB_DISP_PAYLOAD_FULL = (1 << 13),
+ SUB_DISP_PAYLOAD_EMPTY = (1 << 12),
+ MAIN_DISP_HEADER_FULL = (1 << 11),
+ MAIN_DISP_HEADER_EMPTY = (1 << 10),
+ MAIN_DISP_PAYLOAD_FULL = (1 << 9),
+ MAIN_DISP_PAYLOAD_EMPTY = (1 << 8),
+};
+
+enum dsim_no_of_data_lane {
+ DSIM_DATA_LANE_1 = 0,
+ DSIM_DATA_LANE_2 = 1,
+ DSIM_DATA_LANE_3 = 2,
+ DSIM_DATA_LANE_4 = 3,
+};
+
+enum dsim_byte_clk_src {
+ DSIM_PLL_OUT_DIV8 = 0,
+ DSIM_EXT_CLK_DIV8 = 1,
+ DSIM_EXT_CLK_BYPASS = 2,
+};
+
+enum dsim_lane {
+ DSIM_LANE_DATA0 = (1 << 0),
+ DSIM_LANE_DATA1 = (1 << 1),
+ DSIM_LANE_DATA2 = (1 << 2),
+ DSIM_LANE_DATA3 = (1 << 3),
+ DSIM_LANE_DATA_ALL = 0xf,
+ DSIM_LANE_CLOCK = (1 << 4),
+ DSIM_LANE_ALL = DSIM_LANE_CLOCK | DSIM_LANE_DATA_ALL,
+};
+
+enum dsim_pixel_format {
+ DSIM_CMD_3BPP = 0,
+ DSIM_CMD_8BPP = 1,
+ DSIM_CMD_12BPP = 2,
+ DSIM_CMD_16BPP = 3,
+ DSIM_VID_16BPP_565 = 4,
+ DSIM_VID_18BPP_666PACKED = 5,
+ DSIM_18BPP_666LOOSELYPACKED = 6,
+ DSIM_24BPP_888 = 7,
+};
+
+enum dsim_lane_state {
+ DSIM_LANE_STATE_HS_READY,
+ DSIM_LANE_STATE_ULPS,
+ DSIM_LANE_STATE_STOP,
+ DSIM_LANE_STATE_LPDT,
+};
+
+enum dsim_transfer {
+ DSIM_TRANSFER_NEITHER = 0,
+ DSIM_TRANSFER_BYCPU = (1 << 7),
+ DSIM_TRANSFER_BYLCDC = (1 << 6),
+ DSIM_TRANSFER_BOTH = (0x3 << 6)
+};
+
+enum dsim_lane_change {
+ DSIM_NO_CHANGE = 0,
+ DSIM_DATA_LANE_CHANGE = 1,
+ DSIM_CLOCK_NALE_CHANGE = 2,
+ DSIM_ALL_LANE_CHANGE = 3,
+};
+
+enum dsim_int_src {
+ DSIM_ALL_OF_INTR = 0xffffffff,
+ DSIM_PLL_STABLE = (1 << 31),
+};
+
+/**
+ * struct dsim_config - interface for configuring mipi-dsi controller.
+ *
+ * @auto_flush: enable or disable Auto flush of MD FIFO using VSYNC pulse.
+ * @eot_disable: enable or disable EoT packet in HS mode.
+ * @auto_vertical_cnt: specifies auto vertical count mode.
+ * in Video mode, the vertical line transition uses line counter
+ * configured by VSA, VBP, and Vertical resolution.
+ * If this bit is set to '1', the line counter does not use VSA and VBP
+ * registers.(in command mode, this variable is ignored)
+ * @hse: set horizontal sync event mode.
+ * In VSYNC pulse and Vporch area, MIPI DSI master transfers only HSYNC
+ * start packet to MIPI DSI slave at MIPI DSI spec1.1r02.
+ * this bit transfers HSYNC end packet in VSYNC pulse and Vporch area
+ * (in mommand mode, this variable is ignored)
+ * @hfp: specifies HFP disable mode.
+ * if this variable is set, DSI master ignores HFP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hbp: specifies HBP disable mode.
+ * if this variable is set, DSI master ignores HBP area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @hsa: specifies HSA disable mode.
+ * if this variable is set, DSI master ignores HSA area in VIDEO mode.
+ * (in command mode, this variable is ignored)
+ * @e_no_data_lane: specifies data lane count to be used by Master.
+ * @e_byte_clk: select byte clock source. (it must be DSIM_PLL_OUT_DIV8)
+ * DSIM_EXT_CLK_DIV8 and DSIM_EXT_CLK_BYPASSS are not supported.
+ * @pll_stable_time: specifies the PLL Timer for stability of the ganerated
+ * clock(System clock cycle base)
+ * if the timer value goes to 0x00000000, the clock stable bit of status
+ * and interrupt register is set.
+ * @esc_clk: specifies escape clock frequency for getting the escape clock
+ * prescaler value.
+ * @stop_holding_cnt: specifies the interval value between transmitting
+ * read packet(or write "set_tear_on" command) and BTA request.
+ * after transmitting read packet or write "set_tear_on" command,
+ * BTA requests to D-PHY automatically. this counter value specifies
+ * the interval between them.
+ * @bta_timeout: specifies the timer for BTA.
+ * this register specifies time out from BTA request to change
+ * the direction with respect to Tx escape clock.
+ * @rx_timeout: specifies the timer for LP Rx mode timeout.
+ * this register specifies time out on how long RxValid deasserts,
+ * after RxLpdt asserts with respect to Tx escape clock.
+ * - RxValid specifies Rx data valid indicator.
+ * - RxLpdt specifies an indicator that D-PHY is under RxLpdt mode.
+ * - RxValid and RxLpdt specifies signal from D-PHY.
+ * @e_lane_swap: swaps Dp/Dn channel of Clock lane or Data lane.
+ * if this bit is set, Dp and Dn channel would be swapped each other.
+ */
+struct dsim_config {
+ unsigned char auto_flush;
+ unsigned char eot_disable;
+
+ unsigned char auto_vertical_cnt;
+ unsigned char hse;
+ unsigned char hfp;
+ unsigned char hbp;
+ unsigned char hsa;
+
+ enum dsim_no_of_data_lane e_no_data_lane;
+ enum dsim_byte_clk_src e_byte_clk;
+
+ /*
+ * ===========================================
+ * | P | M | S | MHz |
+ * -------------------------------------------
+ * | 3 | 100 | 3 | 100 |
+ * | 3 | 100 | 2 | 200 |
+ * | 3 | 63 | 1 | 252 |
+ * | 4 | 100 | 1 | 300 |
+ * | 4 | 110 | 1 | 330 |
+ * | 12 | 350 | 1 | 350 |
+ * | 3 | 100 | 1 | 400 |
+ * | 4 | 150 | 1 | 450 |
+ * | 3 | 118 | 1 | 472 |
+ * | 12 | 250 | 0 | 500 |
+ * | 4 | 100 | 0 | 600 |
+ * | 3 | 81 | 0 | 648 |
+ * | 3 | 88 | 0 | 704 |
+ * | 3 | 90 | 0 | 720 |
+ * | 3 | 100 | 0 | 800 |
+ * | 12 | 425 | 0 | 850 |
+ * | 4 | 150 | 0 | 900 |
+ * | 12 | 475 | 0 | 950 |
+ * | 6 | 250 | 0 | 1000 |
+ * -------------------------------------------
+ */
+ unsigned char p;
+ unsigned short m;
+ unsigned char s;
+
+ unsigned int pll_stable_time;
+ unsigned long esc_clk;
+
+ unsigned short stop_holding_cnt;
+ unsigned char bta_timeout;
+ unsigned short rx_timeout;
+ enum dsim_video_mode_type e_lane_swap;
+};
+
+/**
+ * struct dsim_lcd_config - interface for configuring mipi-dsi based lcd panel.
+ *
+ * @e_interface: specifies interface to be used.(CPU or RGB interface)
+ * @parameter[0]: specifies virtual channel number
+ * that main or sub diaplsy uses.
+ * @parameter[1]: specifies pixel stream format for main or sub display.
+ * @parameter[2]: selects Burst mode in Video mode.
+ * in Non-burst mode, RGB data area is filled with RGB data and NULL
+ * packets, according to input bandwidth of RGB interface.
+ * In Burst mode, RGB data area is filled with RGB data only.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ * @mipi_ddi_pd: pointer for lcd panel platform data.
+ */
+struct dsim_lcd_config {
+ enum dsim_interface_type e_interface;
+ unsigned int parameter[3];
+
+ void *lcd_panel_info;
+ void *mipi_ddi_pd;
+};
+
+struct dsim_global;
+struct fb_info;
+struct regulator;
+
+/**
+ * struct s5p_platform_dsim - interface to platform data for mipi-dsi driver.
+ *
+ * @clk_name: specifies clock name for mipi-dsi.
+ * @lcd_panel_name: specifies lcd panel name registered to mipi-dsi driver.
+ * lcd panel driver searched would be actived.
+ * @mipi_1_1v_name: specifies mipi 1.1v regulator name.
+ * @mipi_1_8v_name: specifies mipi 1.8v regulator name.
+ * @platfrom_rev: specifies platform revision number.
+ * revision number should become 1.
+ * @dsim_config: pointer of structure for configuring mipi-dsi controller.
+ * @dsim_lcd_info: pointer to structure for configuring
+ * mipi-dsi based lcd panel.
+ * @mipi_power: callback pointer for enabling or disabling mipi power.
+ * @part_reset: callback pointer for reseting mipi phy.
+ * @init_d_phy: callback pointer for enabing d_phy of dsi master.
+ * @get_fb_frame_done: callback pointer for getting frame done status of the
+ * display controller(FIMD).
+ * @trigger: callback pointer for triggering display controller(FIMD)
+ * in case of CPU mode.
+ * @delay_for_stabilization: specifies stable time.
+ * this delay needs when writing data on SFR
+ * after mipi mode became LP mode.
+ */
+struct s5p_platform_dsim {
+ char *clk_name;
+ char *mipi_1_1v_name;
+ char *mipi_1_8v_name;
+ char lcd_panel_name[64];
+ unsigned int platform_rev;
+
+ struct dsim_config *dsim_info;
+ struct dsim_lcd_config *dsim_lcd_info;
+
+ unsigned int delay_for_stabilization;
+
+ int (*mipi_power) (struct dsim_global *dsim,
+ struct regulator *p_mipi_1_1v,
+ struct regulator *p_mipi_1_8v, unsigned int enable);
+ int (*part_reset) (struct dsim_global *dsim);
+ int (*init_d_phy) (struct dsim_global *dsim);
+ int (*get_fb_frame_done) (struct fb_info *info);
+ void (*trigger) (struct fb_info *info);
+};
+
+/**
+ * struct dsim_global - global interface for mipi-dsi driver.
+ *
+ * @dev: driver model representation of the device.
+ * @clock: pointer to MIPI-DSI clock of clock framework.
+ * @irq: interrupt number to MIPI-DSI controller.
+ * @reg_base: base address to memory mapped SRF of MIPI-DSI controller.
+ * (virtual address)
+ * @r_mipi_1_1v: pointer to regulator for MIPI 1.1v power.
+ * @r_mipi_1_8v: pointer to regulator for MIPI 1.8v power.
+ * @pd: pointer to MIPI-DSI driver platform data.
+ * @dsim_lcd_info: pointer to structure for configuring
+ * mipi-dsi based lcd panel.
+ * @lcd_panel_info: pointer for lcd panel specific structure.
+ * this structure specifies width, height, timing and polarity and so on.
+ * @mipi_ddi_pd: pointer for lcd panel platform data.
+ * @mipi_drv: pointer to driver structure for mipi-dsi based lcd panel.
+ * @s3cfb_notif: kernel notifier structure to be registered
+ * by device specific framebuffer driver.
+ * this notifier could be used by fb_blank of device specifiec
+ * framebuffer driver.
+ * @state: specifies status of MIPI-DSI controller.
+ * the status could be RESET, INIT, STOP, HSCLKEN and ULPS.
+ * @data_lane: specifiec enabled data lane number.
+ * this variable would be set by driver according to e_no_data_lane
+ * automatically.
+ * @e_clk_src: select byte clock source.
+ * this variable would be set by driver according to e_byte_clock
+ * automatically.
+ * @hs_clk: HS clock rate.
+ * this variable would be set by driver automatically.
+ * @byte_clk: Byte clock rate.
+ * this variable would be set by driver automatically.
+ * @escape_clk: ESCAPE clock rate.
+ * this variable would be set by driver automatically.
+ * @freq_band: indicates Bitclk frequency band for D-PHY global timing.
+ * Serial Clock(=ByteClk X 8) FreqBand[3:0]
+ * ~ 99.99 MHz 0000
+ * 100 ~ 119.99 MHz 0001
+ * 120 ~ 159.99 MHz 0010
+ * 160 ~ 199.99 MHz 0011
+ * 200 ~ 239.99 MHz 0100
+ * 140 ~ 319.99 MHz 0101
+ * 320 ~ 389.99 MHz 0110
+ * 390 ~ 449.99 MHz 0111
+ * 450 ~ 509.99 MHz 1000
+ * 510 ~ 559.99 MHz 1001
+ * 560 ~ 639.99 MHz 1010
+ * 640 ~ 689.99 MHz 1011
+ * 690 ~ 769.99 MHz 1100
+ * 770 ~ 869.99 MHz 1101
+ * 870 ~ 949.99 MHz 1110
+ * 950 ~ 1000 MHz 1111
+ * this variable would be calculated by driver automatically.
+ *
+ * @header_fifo_index: specifies header fifo index.
+ * this variable is not used yet.
+ */
+struct dsim_global {
+ struct device *dev;
+ struct clk *clock;
+ unsigned int irq;
+ void __iomem *reg_base;
+
+ struct regulator *r_mipi_1_1v;
+ struct regulator *r_mipi_1_8v;
+
+ struct s5p_platform_dsim *pd;
+ struct dsim_config *dsim_info;
+ struct dsim_lcd_config *dsim_lcd_info;
+ struct fb_videomode *lcd_panel_info;
+ struct mipi_ddi_platform_data *mipi_ddi_pd;
+ struct mipi_lcd_driver *mipi_drv;
+ struct notifier_block s3cfb_notif;
+
+ unsigned char state;
+ unsigned int data_lane;
+ enum dsim_byte_clk_src e_clk_src;
+ unsigned long hs_clk;
+ unsigned long byte_clk;
+ unsigned long escape_clk;
+ unsigned char freq_band;
+
+ char header_fifo_index[DSIM_HEADER_FIFO_SZ];
+};
+
+/*
+ * driver structure for mipi-dsi based lcd panel.
+ *
+ * this structure should be registered by lcd panel driver.
+ * mipi-dsi driver seeks lcd panel registered through name field
+ * and calls these callback functions in appropriate time.
+ */
+struct mipi_lcd_driver {
+ s8 *name;
+
+ s32 (*init)(struct device *dev);
+ void (*display_on)(struct device *dev);
+ s32 (*set_link)(struct mipi_ddi_platform_data *pd);
+ s32 (*probe)(struct device *dev);
+ s32 (*remove)(struct device *dev);
+ void (*shutdown)(struct device *dev);
+ s32 (*suspend)(struct device *dev);
+ s32 (*resume)(struct device *dev);
+};
+
+/*
+ * register mipi_lcd_driver object defined by lcd panel driver
+ * to mipi-dsi driver.
+ */
+extern int s5p_dsim_register_lcd_driver(struct mipi_lcd_driver *lcd_drv);
+
+/* reset MIPI PHY through MIPI PHY CONTROL REGISTER. */
+extern int s5p_dsim_part_reset(struct dsim_global *dsim);
+
+/* enable MIPI D-PHY and DSI Master block. */
+extern int s5p_dsim_init_d_phy(struct dsim_global *dsim);
+
+struct regulator;
+
+/* enable regulators to MIPI-DSI power. */
+extern int s5p_dsim_mipi_power(struct dsim_global *dsim,
+ struct regulator *p_mipi_1_1v, struct regulator *p_mipi_1_8v,
+ unsigned int enable);
+
+/* send commands to mipi based lcd panel. */
+extern int s5p_dsim_wr_data(void *dsim_data, unsigned int data_id,
+ unsigned int data0, unsigned int data1);
+
+/* get framedone status of mipi-dsi controller. */
+extern int s5p_dsim_get_frame_done_status(void *dsim_data);
+
+/* clear framedone interrupt of mipi-dsi controller. */
+extern int s5p_dsim_clear_frame_done(void *dsim_data);
+
+/* wrapper function for changing transfer mode. */
+extern int s5p_dsim_change_transfer_mode(unsigned int mode);
+
+#endif /* _DSIM_H */
diff --git a/arch/arm/plat-samsung/include/plat/mipi_ddi.h b/arch/arm/plat-samsung/include/plat/mipi_ddi.h
new file mode 100644
index 0000000..d9a82b7
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/mipi_ddi.h
@@ -0,0 +1,98 @@
+/* linux/arm/arch/mach-s5pc110/include/mach/mipi_ddi.h
+ *
+ * definitions for DDI based MIPI-DSI.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _MIPI_DDI_H
+#define _MIPI_DDI_H
+
+enum mipi_ddi_interface {
+ RGB_IF = 0x4000,
+ I80_IF = 0x8000,
+ YUV_601 = 0x10000,
+ YUV_656 = 0x20000,
+ MIPI_VIDEO = 0x1000,
+ MIPI_COMMAND = 0x2000,
+};
+
+enum mipi_ddi_panel_select {
+ DDI_MAIN_LCD = 0,
+ DDI_SUB_LCD = 1,
+};
+
+enum mipi_ddi_model {
+ S6DR117 = 0,
+};
+
+enum mipi_ddi_parameter {
+ /* DSIM video interface parameter */
+ DSI_VIRTUAL_CH_ID = 0,
+ DSI_FORMAT = 1,
+ DSI_VIDEO_MODE_SEL = 2,
+};
+
+struct lcd_device;
+struct fb_info;
+
+struct mipi_ddi_platform_data {
+ void *dsim_data;
+ /*
+ * it is used for command mode lcd panel and
+ * when all contents of framebuffer in panel module are transfered
+ * to lcd panel it occurs te signal.
+ *
+ * note:
+ * - in case of command mode(cpu mode), it should be triggered only
+ * when TE signal of lcd panel and frame done interrupt of display
+ * controller or mipi controller occurs.
+ */
+ unsigned int te_irq;
+
+ /*
+ * it is used for PM stable time at te interrupt handler and
+ * could be used according to lcd panel characteristic or not.
+ */
+ unsigned int resume_complete;
+
+ int (*lcd_reset) (struct lcd_device *ld);
+ int (*lcd_power_on) (struct lcd_device *ld, int enable);
+ int (*backlight_on) (int enable);
+
+ /* transfer command to lcd panel at LP mode. */
+ int (*cmd_write) (void *dsim_data, unsigned int data_id,
+ unsigned int data0, unsigned int data1);
+ int (*cmd_read) (void *dsim_data, unsigned int data_id,
+ unsigned int data0, unsigned int data1);
+ /*
+ * get the status that all screen data have been transferred
+ * to mipi-dsi.
+ */
+ int (*get_dsim_frame_done) (void *dsim_data);
+ int (*clear_dsim_frame_done) (void *dsim_data);
+
+ /*
+ * changes mipi transfer mode to LP or HS mode.
+ *
+ * LP mode needs when some commands like gamma values transfers
+ * to lcd panel.
+ */
+ int (*change_dsim_transfer_mode) (unsigned int mode);
+
+ /* get frame done status of display controller. */
+ int (*get_fb_frame_done) (struct fb_info *info);
+ /* trigger display controller in case of cpu mode. */
+ void (*trigger) (struct fb_info *info);
+
+ unsigned int reset_delay;
+ unsigned int power_on_delay;
+ unsigned int power_off_delay;
+};
+
+#endif /* _MIPI_DDI_H */
diff --git a/arch/arm/plat-samsung/include/plat/regs-dsim.h b/arch/arm/plat-samsung/include/plat/regs-dsim.h
new file mode 100644
index 0000000..dc83089
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/regs-dsim.h
@@ -0,0 +1,281 @@
+/* linux/arch/arm/plat-s5pc11x/include/plat/regs-dsim.h
+ *
+ * Register definition file for Samsung MIPI-DSIM driver
+ *
+ * InKi Dae <inki.dae at samsung.com>, Copyright (c) 2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _REGS_DSIM_H
+#define _REGS_DSIM_H
+
+#define S5P_DSIM_STATUS (0x0) /* Status register */
+#define S5P_DSIM_SWRST (0x4) /* Software reset register */
+#define S5P_DSIM_CLKCTRL (0x8) /* Clock control register */
+#define S5P_DSIM_TIMEOUT (0xc) /* Time out register */
+#define S5P_DSIM_CONFIG (0x10) /* Configuration register */
+#define S5P_DSIM_ESCMODE (0x14) /* Escape mode register */
+
+/* Main display image resolution register */
+#define S5P_DSIM_MDRESOL (0x18)
+#define S5P_DSIM_MVPORCH (0x1c) /* Main display Vporch register */
+#define S5P_DSIM_MHPORCH (0x20) /* Main display Hporch register */
+#define S5P_DSIM_MSYNC (0x24) /* Main display sync area register */
+
+/* Sub display image resolution register */
+#define S5P_DSIM_SDRESOL (0x28)
+#define S5P_DSIM_INTSRC (0x2c) /* Interrupt source register */
+#define S5P_DSIM_INTMSK (0x30) /* Interrupt mask register */
+#define S5P_DSIM_PKTHDR (0x34) /* Packet Header FIFO register */
+#define S5P_DSIM_PAYLOAD (0x38) /* Payload FIFO register */
+#define S5P_DSIM_RXFIFO (0x3c) /* Read FIFO register */
+#define S5P_DSIM_FIFOTHLD (0x40) /* FIFO threshold level register */
+#define S5P_DSIM_FIFOCTRL (0x44) /* FIFO status and control register */
+
+/* FIFO memory AC characteristic register */
+#define S5P_DSIM_MEMACCHR (0x48)
+#define S5P_DSIM_PLLCTRL (0x4c) /* PLL control register */
+#define S5P_DSIM_PLLTMR (0x50) /* PLL timer register */
+#define S5P_DSIM_PHYACCHR (0x54) /* D-PHY AC characteristic register */
+#define S5P_DSIM_PHYACCHR1 (0x58) /* D-PHY AC characteristic register1 */
+
+/* DSIM_SWRST */
+#define DSIM_FUNCRST (1 << 16)
+#define DSIM_SWRST (1 << 0)
+
+/* S5P_DSIM_TIMEOUT */
+#define DSIM_LPDR_TOUT_SHIFT (0)
+#define DSIM_BTA_TOUT_SHIFT (16)
+#define DSIM_LPDR_TOUT(x) (((x) & 0xffff) << DSIM_LPDR_TOUT_SHIFT)
+#define DSIM_BTA_TOUT(x) (((x) & 0xff) << DSIM_BTA_TOUT_SHIFT)
+
+/* S5P_DSIM_CLKCTRL */
+#define DSIM_ESC_PRESCALER_SHIFT (0)
+#define DSIM_LANE_ESC_CLKEN_SHIFT (19)
+#define DSIM_BYTE_CLKEN_SHIFT (24)
+#define DSIM_BYTE_CLK_SRC_SHIFT (25)
+#define DSIM_PLL_BYPASS_SHIFT (27)
+#define DSIM_ESC_CLKEN_SHIFT (28)
+#define DSIM_TX_REQUEST_HSCLK_SHIFT (31)
+#define DSIM_ESC_PRESCALER(x) (((x) & 0xffff) << \
+ DSIM_ESC_PRESCALER_SHIFT)
+#define DSIM_LANE_ESC_CLKEN(x) (((x) & 0x1f) << \
+ DSIM_LANE_ESC_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_ENABLE (1 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLK_DISABLE (0 << DSIM_BYTE_CLKEN_SHIFT)
+#define DSIM_BYTE_CLKSRC(x) (((x) & 0x3) << DSIM_BYTE_CLK_SRC_SHIFT)
+#define DSIM_PLL_BYPASS_PLL (0 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_PLL_BYPASS_EXTERNAL (1 << DSIM_PLL_BYPASS_SHIFT)
+#define DSIM_ESC_CLKEN_ENABLE (1 << DSIM_ESC_CLKEN_SHIFT)
+#define DSIM_ESC_CLKEN_DISABLE (0 << DSIM_ESC_CLKEN_SHIFT)
+
+/* S5P_DSIM_CONFIG */
+#define DSIM_LANE_EN_SHIFT (0)
+#define DSIM_NUM_OF_DATALANE_SHIFT (5)
+#define DSIM_SUB_PIX_FORMAT_SHIFT (8)
+#define DSIM_MAIN_PIX_FORMAT_SHIFT (12)
+#define DSIM_SUB_VC_SHIFT (16)
+#define DSIM_MAIN_VC_SHIFT (18)
+#define DSIM_HSA_MODE_SHIFT (20)
+#define DSIM_HBP_MODE_SHIFT (21)
+#define DSIM_HFP_MODE_SHIFT (22)
+#define DSIM_HSE_MODE_SHIFT (23)
+#define DSIM_AUTO_MODE_SHIFT (24)
+#define DSIM_VIDEO_MODE_SHIFT (25)
+#define DSIM_BURST_MODE_SHIFT (26)
+#define DSIM_SYNC_INFORM_SHIFT (27)
+#define DSIM_EOT_R03_SHIFT (28)
+#define DSIM_LANE_ENx(x) ((1) << x)
+
+/* in case of Gemunus, it should be 0x1. */
+#define DSIM_NUM_OF_DATA_LANE(x) ((x) << 5)
+#define DSIM_SUB_PIX_FORMAT_3BPP (0 << 8) /* command mode only */
+#define DSIM_SUB_PIX_FORMAT_8BPP (1 << 8) /* command mode only */
+#define DSIM_SUB_PIX_FORMAT_12BPP (2 << 8) /* command mode only */
+#define DSIM_SUB_PIX_FORMAT_16BPP (3 << 8) /* command mode only */
+#define DSIM_SUB_PIX_FORMAT_16BPP_RGB (4 << 8) /* video mode only */
+#define DSIM_SUB_PIX_FORMAT_18BPP_PRGB (5 << 8) /* video mode only */
+#define DSIM_SUB_PIX_FORMAT_18BPP_LRGB (6 << 8) /* common */
+#define DSIM_SUB_PIX_FORMAT_24BPP_RGB (7 << 8) /* common */
+#define DSIM_MAIN_PIX_FORMAT_3BPP (0 << 12) /* command mode only */
+#define DSIM_MAIN_PIX_FORMAT_8BPP (1 << 12) /* command mode only */
+#define DSIM_MAIN_PIX_FORMAT_12BPP (2 << 12) /* command mode only */
+#define DSIM_MAIN_PIX_FORMAT_16BPP (3 << 12) /* command mode only */
+#define DSIM_MAIN_PIX_FORMAT_16BPP_RGB (4 << 12) /* video mode only */
+#define DSIM_MAIN_PIX_FORMAT_18BPP_PRGB (5 << 12) /* video mode only */
+#define DSIM_MAIN_PIX_FORMAT_18BPP_LRGB (6 << 12) /* common */
+#define DSIM_MAIN_PIX_FORMAT_24BPP_RGB (7 << 12) /* common */
+
+/* Virtual channel number for sub display */
+#define DSIM_SUB_VC(x) (((x) & 0x3) << 16)
+/* Virtual channel number for main display */
+#define DSIM_MAIN_VC(x) (((x) & 0x3) << 18)
+#define DSIM_HSA_MODE_ENABLE (1 << 20)
+#define DSIM_HSA_MODE_DISABLE (0 << 20)
+#define DSIM_HBP_MODE_ENABLE (1 << 21)
+#define DSIM_HBP_MODE_DISABLE (0 << 21)
+#define DSIM_HFP_MODE_ENABLE (1 << 22)
+#define DSIM_HFP_MODE_DISABLE (0 << 22)
+#define DSIM_HSE_MODE_ENABLE (1 << 23)
+#define DSIM_HSE_MODE_DISABLE (0 << 23)
+#define DSIM_AUTO_MODE (1 << 24)
+#define DSIM_CONFIGURATION_MODE (0 << 24)
+#define DSIM_VIDEO_MODE (1 << 25)
+#define DSIM_COMMAND_MODE (0 << 25)
+#define DSIM_BURST_MODE (1 << 26)
+#define DSIM_NON_BURST_MODE (0 << 26)
+#define DSIM_SYNC_INFORM_PULSE (1 << 27)
+#define DSIM_SYNC_INFORM_EVENT (0 << 27)
+/* enable EoT packet generation for V1.01r11 */
+#define DSIM_EOT_R03_ENABLE (0 << 28)
+/* disable EoT packet generation for V1.01r03 */
+#define DSIM_EOT_R03_DISABLE (1 << 28)
+
+/* S5P_DSIM_ESCMODE */
+#define DSIM_STOP_STATE_CNT_SHIFT (21)
+#define DSIM_STOP_STATE_CNT(x) (((x) & 0x3ff) << \
+ DSIM_STOP_STATE_CNT_SHIFT)
+#define DSIM_FORCE_STOP_STATE_SHIFT (20)
+#define DSIM_FORCE_BTA_SHIFT (16)
+#define DSIM_CMD_LPDT_HS_MODE (0 << 7)
+#define DSIM_CMD_LPDT_LP_MODE (1 << 7)
+#define DSIM_TX_LPDT_HS_MODE (0 << 6)
+#define DSIM_TX_LPDT_LP_MODE (1 << 6)
+#define DSIM_TX_TRIGGER_RST_SHIFT (4)
+#define DSIM_TX_UIPS_DAT_SHIFT (3)
+#define DSIM_TX_UIPS_EXIT_SHIFT (2)
+#define DSIM_TX_UIPS_CLK_SHIFT (1)
+#define DSIM_TX_UIPS_CLK_EXIT_SHIFT (0)
+
+/* S5P_DSIM_MDRESOL */
+#define DSIM_MAIN_STAND_BY (1 << 31)
+#define DSIM_MAIN_NOT_READY (0 << 31)
+#define DSIM_MAIN_VRESOL(x) (((x) & 0x7ff) << 16)
+#define DSIM_MAIN_HRESOL(x) (((x) & 0X7ff) << 0)
+
+/* S5P_DSIM_MVPORCH */
+#define DSIM_CMD_ALLOW_SHIFT (28)
+#define DSIM_STABLE_VFP_SHIFT (16)
+#define DSIM_MAIN_VBP_SHIFT (0)
+#define DSIM_CMD_ALLOW_MASK (0xf << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP_MASK (0x7ff << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP_MASK (0x7ff << DSIM_MAIN_VBP_SHIFT)
+#define DSIM_CMD_ALLOW(x) (((x) & 0xf) << DSIM_CMD_ALLOW_SHIFT)
+#define DSIM_STABLE_VFP(x) (((x) & 0x7ff) << DSIM_STABLE_VFP_SHIFT)
+#define DSIM_MAIN_VBP(x) (((x) & 0x7ff) << DSIM_MAIN_VBP_SHIFT)
+
+/* S5P_DSIM_MHPORCH */
+#define DSIM_MAIN_HFP_SHIFT (16)
+#define DSIM_MAIN_HBP_SHIFT (0)
+#define DSIM_MAIN_HFP_MASK ((0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP_MASK ((0xffff) << DSIM_MAIN_HBP_SHIFT)
+#define DSIM_MAIN_HFP(x) (((x) & 0xffff) << DSIM_MAIN_HFP_SHIFT)
+#define DSIM_MAIN_HBP(x) (((x) & 0xffff) << DSIM_MAIN_HBP_SHIFT)
+
+/* S5P_DSIM_MSYNC */
+#define DSIM_MAIN_VSA_SHIFT (22)
+#define DSIM_MAIN_HSA_SHIFT (0)
+#define DSIM_MAIN_VSA_MASK ((0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA_MASK ((0xffff) << DSIM_MAIN_HSA_SHIFT)
+#define DSIM_MAIN_VSA(x) (((x) & 0x3ff) << DSIM_MAIN_VSA_SHIFT)
+#define DSIM_MAIN_HSA(x) (((x) & 0xffff) << DSIM_MAIN_HSA_SHIFT)
+
+/* S5P_DSIM_SDRESOL */
+#define DSIM_SUB_STANDY_SHIFT (31)
+#define DSIM_SUB_VRESOL_SHIFT (16)
+#define DSIM_SUB_HRESOL_SHIFT (0)
+#define DSIM_SUB_STANDY_MASK ((0x1) << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL_MASK ((0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL_MASK ((0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+#define DSIM_SUB_STANDY (1 << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_NOT_READY (0 << DSIM_SUB_STANDY_SHIFT)
+#define DSIM_SUB_VRESOL(x) (((x) & 0x7ff) << DSIM_SUB_VRESOL_SHIFT)
+#define DSIM_SUB_HRESOL(x) (((x) & 0x7ff) << DSIM_SUB_HRESOL_SHIFT)
+
+/* S5P_DSIM_INTSRC */
+#define INTSRC_ERR_CONTENT_LP1 (1 << 0)
+#define INTSRC_ERR_CONTENT_LP0 (1 << 1)
+#define INTSRC_ERR_CONTROL0 (1 << 2)
+#define INTSRC_ERR_CONTROL1 (1 << 3)
+#define INTSRC_ERR_CONTROL2 (1 << 4)
+#define INTSRC_ERR_CONTROL3 (1 << 5)
+#define INTSRC_ERR_SYNC0 (1 << 6)
+#define INTSRC_ERR_SYNC1 (1 << 7)
+#define INTSRC_ERR_SYNC2 (1 << 8)
+#define INTSRC_ERR_SYNC3 (1 << 9)
+#define INTSRC_ERR_ESC0 (1 << 10)
+#define INTSRC_ERR_ESC1 (1 << 11)
+#define INTSRC_ERR_ESC2 (1 << 12)
+#define INTSRC_ERR_ESC3 (1 << 13)
+#define INTSRC_ERR_RX_CRC (1 << 14)
+#define INTSRC_ERR_RX_ECC (1 << 15)
+#define INTSRC_RX_ACK (1 << 16)
+#define INTSRC_RX_TE (1 << 17)
+#define INTSRC_RX_DAT_DONE (1 << 18)
+#define INTSRC_TA_TOUT (1 << 20)
+#define INTSRC_LPDR_TOUT (1 << 21)
+#define INTSRC_FRAME_DONE (1 << 24)
+#define INTSRC_BUS_TURN_OVER (1 << 25)
+#define INTSRC_SYNC_OVERRIDE (1 << 28)
+#define INTSRC_SFR_FIFO_EMPTY (1 << 29)
+#define INTSRC_SW_RST_RELEASE (1 << 30)
+#define INTSRC_PLL_STABLE (1 << 31)
+
+/* S5P_DSIM_INTMSK */
+#define INTMSK_ERR_CONTENT_LP1 (1 << 0)
+#define INTMSK_ERR_CONTENT_LP0 (1 << 1)
+#define INTMSK_ERR_CONTROL0 (1 << 2)
+#define INTMSK_ERR_CONTROL1 (1 << 3)
+#define INTMSK_ERR_CONTROL2 (1 << 4)
+#define INTMSK_ERR_CONTROL3 (1 << 5)
+#define INTMSK_ERR_SYNC0 (1 << 6)
+#define INTMSK_ERR_SYNC1 (1 << 7)
+#define INTMSK_ERR_SYNC2 (1 << 8)
+#define INTMSK_ERR_SYNC3 (1 << 9)
+#define INTMSK_ERR_ESC0 (1 << 10)
+#define INTMSK_ERR_ESC1 (1 << 11)
+#define INTMSK_ERR_ESC2 (1 << 12)
+#define INTMSK_ERR_ESC3 (1 << 13)
+#define INTMSK_ERR_RX_CRC (1 << 14)
+#define INTMSK_ERR_RX_ECC (1 << 15)
+#define INTMSK_RX_ACK (1 << 16)
+#define INTMSK_RX_TE (1 << 17)
+#define INTMSK_RX_DAT_DONE (1 << 18)
+#define INTMSK_TA_TOUT (1 << 20)
+#define INTMSK_LPDR_TOUT (1 << 21)
+#define INTMSK_FRAME_DONE (1 << 24)
+#define INTMSK_BUS_TURN_OVER (1 << 25)
+#define INTMSK_SFR_FIFO_EMPTY (1 << 29)
+#define INTMSK_SW_RST_RELEASE (1 << 30)
+#define INTMSK_PLL_STABLE (1 << 31)
+
+/* S5P_DSIM_PKTHDR */
+#define DSIM_PACKET_HEADER_DI(x) (((x) & 0xff) << 0)
+/* Word count lower byte for long packet */
+#define DSIM_PACKET_HEADER_DAT0(x) (((x) & 0xff) << 8)
+/* Word count upper byte for long packet */
+#define DSIM_PACKET_HEADER_DAT1(x) (((x) & 0xff) << 16)
+
+/* S5P_DSIM_FIFOCTRL */
+#define DSIM_RX_FIFO (1 << 4)
+#define DSIM_TX_SFR_FIFO (1 << 3)
+#define DSIM_I80_FIFO (1 << 2)
+#define DSIM_SUB_DISP_FIFO (1 << 1)
+#define DSIM_MAIN_DISP_FIFO (1 << 0)
+
+/* S5P_DSIM_PHYACCHR */
+#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
+#define DSIM_AFC_ENABLE (1 << 14)
+#define DSIM_AFC_DISABLE (0 << 14)
+
+/* S5P_DSIM_PLLCTRL */
+#define DSIM_PMS_SHIFT (1)
+#define DSIM_PLL_EN_SHIFT (23)
+#define DSIM_FREQ_BAND_SHIFT (24)
+#define DSIM_PMS(x) (((x) & 0x7ffff) << DSIM_PMS_SHIFT)
+#define DSIM_FREQ_BAND(x) (((x) & 0xf) << DSIM_FREQ_BAND_SHIFT)
+
+#endif /* _REGS_DSIM_H */
diff --git a/arch/arm/plat-samsung/setup-dsim.c b/arch/arm/plat-samsung/setup-dsim.c
new file mode 100644
index 0000000..874efa0
--- /dev/null
+++ b/arch/arm/plat-samsung/setup-dsim.c
@@ -0,0 +1,144 @@
+/*
+ * S5PC110 MIPI-DSIM driver.
+ *
+ * Author: InKi Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+#include <plat/dsim.h>
+#include <plat/clock.h>
+#include <plat/regs-dsim.h>
+
+static int s5p_dsim_enable_d_phy(struct dsim_global *dsim, unsigned int enable)
+{
+ unsigned int reg;
+
+ WARN_ON(dsim == NULL);
+
+ reg = readl(S5P_MIPI_CONTROL) & ~(1 << 0);
+ reg |= (enable << 0);
+ writel(reg, S5P_MIPI_CONTROL);
+
+ dev_dbg(dsim->dev, "%s : %x\n", __func__, reg);
+
+ return 0;
+}
+
+static int s5p_dsim_enable_dsi_master(struct dsim_global *dsim,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ WARN_ON(dsim == NULL);
+
+ reg = readl(S5P_MIPI_CONTROL) & ~(1 << 2);
+ reg |= (enable << 2);
+ writel(reg, S5P_MIPI_CONTROL);
+
+ dev_dbg(dsim->dev, "%s : %x\n", __func__, reg);
+
+ return 0;
+}
+
+int s5p_dsim_part_reset(struct dsim_global *dsim)
+{
+ WARN_ON(dsim == NULL);
+
+ writel(S5P_MIPI_M_RESETN, S5P_MIPI_PHY_CON0);
+
+ dev_dbg(dsim->dev, "%s\n", __func__);
+
+ return 0;
+}
+
+int s5p_dsim_init_d_phy(struct dsim_global *dsim)
+{
+ WARN_ON(dsim == NULL);
+
+ /**
+ * DPHY and Master block must be enabled at the system initialization
+ * step before data access from/to DPHY begins.
+ */
+ s5p_dsim_enable_d_phy(dsim, 1);
+
+ s5p_dsim_enable_dsi_master(dsim, 1);
+
+ dev_dbg(dsim->dev, "%s\n", __func__);
+
+ return 0;
+}
+
+int s5p_dsim_mipi_power(struct dsim_global *dsim, struct regulator *p_mipi_1_1v,
+ struct regulator *p_mipi_1_8v, unsigned int enable)
+{
+ int ret = -1;
+
+ WARN_ON(dsim == NULL);
+
+ if (IS_ERR(p_mipi_1_1v) || IS_ERR(p_mipi_1_8v)) {
+ dev_err(dsim->dev, "p_mipi_1_1v or p_mipi_1_8v is NULL.\n");
+ return -EINVAL;
+ }
+
+ if (enable) {
+ if (p_mipi_1_1v)
+ ret = regulator_enable(p_mipi_1_1v);
+
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "failed to enable regulator mipi_1_1v.\n");
+ return ret;
+ }
+
+ if (p_mipi_1_8v)
+ ret = regulator_enable(p_mipi_1_8v);
+
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "failed to enable regulator mipi_1_8v.\n");
+ return ret;
+ }
+ } else {
+ if (p_mipi_1_1v)
+ ret = regulator_force_disable(p_mipi_1_1v);
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "failed to disable regulator mipi_1_1v.\n");
+ return ret;
+ }
+
+ if (p_mipi_1_8v)
+ ret = regulator_force_disable(p_mipi_1_8v);
+ if (ret < 0) {
+ dev_err(dsim->dev,
+ "failed to disable regulator mipi_1_8v.\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index a9f9e5e..17f00da 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1938,7 +1938,7 @@ config FB_TMIO_ACCELL
config FB_S3C
tristate "Samsung S3C framebuffer support"
- depends on FB && ARCH_S3C64XX
+ depends on FB && (ARCH_S3C64XX || ARCH_S5PV210)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
@@ -1983,6 +1983,13 @@ config FB_S3C2410_DEBUG
Turn on debugging messages. Note that you can set/unset at run time
through sysfs
+config S5P_MIPI_DSI
+ tristate "Samsung SoC MIPI-DSI support."
+ depends on FB_S3C && ARCH_S5PV210
+ default n
+ ---help---
+ This enables support for MIPI-DSI device.
+
config FB_NUC900
bool "NUC900 LCD framebuffer support"
depends on FB && ARCH_W90X900
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 3c3bf86..d552d28 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -115,6 +115,8 @@ obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
+obj-$(CONFIG_S5P_MIPI_DSI) += s5p-dsim.o s5p_dsim_common.o \
+ s5p_dsim_lowlevel.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_PNX4008_DUM) += pnx4008/
diff --git a/drivers/video/s5p-dsim.c b/drivers/video/s5p-dsim.c
new file mode 100644
index 0000000..1ffc1e0
--- /dev/null
+++ b/drivers/video/s5p-dsim.c
@@ -0,0 +1,471 @@
+/* linux/drivers/video/samsung/s5p-dsim.c
+ *
+ * Samsung MIPI-DSIM driver.
+ *
+ * InKi Dae, <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kthread.h>
+#include <linux/regulator/consumer.h>
+#include <linux/notifier.h>
+
+#include <plat/fb.h>
+#include <plat/regs-dsim.h>
+#include <plat/dsim.h>
+#include <plat/mipi_ddi.h>
+
+#include <mach/map.h>
+
+#include "s5p_dsim_common.h"
+
+struct mipi_lcd_info {
+ struct list_head list;
+ struct mipi_lcd_driver *mipi_drv;
+};
+
+static LIST_HEAD(lcd_info_list);
+static DEFINE_MUTEX(mipi_lock);
+
+struct dsim_global dsim;
+
+struct s5p_platform_dsim *to_dsim_plat(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+
+ return (struct s5p_platform_dsim *)pdev->dev.platform_data;
+}
+
+/*
+ * notifier callback function for fb_blank
+ * - this function would be called by device specific fb_blank.
+ */
+static int s5p_dsim_notifier_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ switch (event) {
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ if (dsim.pd->mipi_power)
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v,
+ dsim.r_mipi_1_8v, 1);
+
+ clk_enable(dsim.clock);
+
+ if (dsim.mipi_drv->resume)
+ dsim.mipi_drv->resume(dsim.dev);
+
+ s5p_dsim_init_dsim(&dsim);
+ s5p_dsim_init_link(&dsim);
+
+ s5p_dsim_set_hs_enable(&dsim);
+ s5p_dsim_set_data_transfer_mode(&dsim,
+ DSIM_TRANSFER_BYCPU, 1);
+
+ /* it needs delay for stabilization */
+ mdelay(dsim.pd->delay_for_stabilization);
+
+ if (dsim.mipi_drv->init)
+ dsim.mipi_drv->init(dsim.dev);
+ else
+ dev_warn(dsim.dev, "init func is null.\n");
+
+ s5p_dsim_set_display_mode(&dsim, dsim.dsim_lcd_info, NULL);
+
+ s5p_dsim_set_data_transfer_mode(&dsim, DSIM_TRANSFER_BYLCDC, 1);
+ dsim.mipi_ddi_pd->resume_complete = 1;
+
+ dev_dbg(dsim.dev, "FB_BLANK_NORMAL or UNBLANK.\n");
+
+ break;
+ case FB_BLANK_POWERDOWN:
+ dsim.mipi_ddi_pd->resume_complete = 0;
+
+ if (dsim.mipi_drv->suspend)
+ dsim.mipi_drv->suspend(dsim.dev);
+
+ clk_disable(dsim.clock);
+
+ if (dsim.pd->mipi_power)
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v,
+ dsim.r_mipi_1_8v, 0);
+
+ dev_dbg(dsim.dev, "FB_BLANK_POWERDOWN.\n");
+ break;
+ default:
+ dev_warn(dsim.dev, "unknown FB_BLANK command.\n");
+ break;
+ }
+
+ return 0;
+}
+
+static int s5p_dsim_register_notif(struct device *dev)
+{
+ memset(&dsim.s3cfb_notif, 0, sizeof(struct notifier_block));
+ dsim.s3cfb_notif.notifier_call = s5p_dsim_notifier_callback;
+
+ return 0/*s3cfb_register_client(&dsim.s3cfb_notif)*/;
+}
+
+static irqreturn_t s5p_dsim_interrupt_handler(int irq, void *dev_id)
+{
+ disable_irq(irq);
+
+ /* additional work. */
+
+ enable_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+int s5p_dsim_register_lcd_driver(struct mipi_lcd_driver *lcd_drv)
+{
+ struct mipi_lcd_info *lcd_info = NULL;
+
+ lcd_info = kmalloc(sizeof(struct mipi_lcd_info), GFP_KERNEL);
+ if (lcd_info == NULL)
+ return -ENOMEM;
+
+ lcd_info->mipi_drv = kmalloc(sizeof(struct mipi_lcd_driver),
+ GFP_KERNEL);
+ if (lcd_info->mipi_drv == NULL)
+ return -ENOMEM;
+
+
+ memcpy(lcd_info->mipi_drv, lcd_drv, sizeof(struct mipi_lcd_driver));
+
+ mutex_lock(&mipi_lock);
+ list_add_tail(&lcd_info->list, &lcd_info_list);
+ mutex_unlock(&mipi_lock);
+
+ dev_dbg(dsim.dev, "registered panel driver(%s) to mipi-dsi driver.\n",
+ lcd_drv->name);
+
+ return 0;
+}
+
+/*
+ * This function is wrapper for changing transfer mode.
+ * It is used to in panel driver before and after changing gamma value.
+ */
+int s5p_dsim_change_transfer_mode(unsigned int mode)
+{
+ if (mode < 0 || mode > 1) {
+ dev_err(dsim.dev, "mode range should be 0 or 1.\n");
+ return -EFAULT;
+ }
+
+ if (mode == 0)
+ s5p_dsim_set_data_transfer_mode(&dsim,
+ DSIM_TRANSFER_BYCPU, mode);
+ else
+ s5p_dsim_set_data_transfer_mode(&dsim,
+ DSIM_TRANSFER_BYLCDC, mode);
+
+ return 0;
+}
+
+struct mipi_lcd_driver *scan_mipi_driver(const char *name)
+{
+ struct mipi_lcd_info *lcd_info;
+ struct mipi_lcd_driver *mipi_drv = NULL;
+
+ mutex_lock(&mipi_lock);
+
+ dev_dbg(dsim.dev, "find lcd panel driver(%s).\n",
+ name);
+
+ list_for_each_entry(lcd_info, &lcd_info_list, list) {
+ mipi_drv = lcd_info->mipi_drv;
+
+ if ((strcmp(mipi_drv->name, name)) == 0) {
+ mutex_unlock(&mipi_lock);
+ dev_dbg(dsim.dev, "found!!!(%s).\n", mipi_drv->name);
+ return mipi_drv;
+ }
+ }
+
+ dev_warn(dsim.dev, "failed to find lcd panel driver(%s).\n",
+ name);
+
+ mutex_unlock(&mipi_lock);
+
+ return NULL;
+}
+
+static int s5p_dsim_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret = -1;
+
+ dsim.pd = to_dsim_plat(&pdev->dev);
+ dsim.dev = &pdev->dev;
+
+ /* set dsim config data, dsim lcd config data and lcd panel data. */
+ dsim.dsim_info = dsim.pd->dsim_info;
+ dsim.dsim_lcd_info = dsim.pd->dsim_lcd_info;
+ dsim.lcd_panel_info =
+ (struct fb_videomode *) dsim.dsim_lcd_info->lcd_panel_info;
+ dsim.mipi_ddi_pd =
+ (struct mipi_ddi_platform_data *)
+ dsim.dsim_lcd_info->mipi_ddi_pd;
+
+ dsim.mipi_ddi_pd->resume_complete = 0;
+
+ WARN_ON(dsim.pd->mipi_1_1v_name == NULL);
+
+ dsim.r_mipi_1_1v = regulator_get(&pdev->dev, dsim.pd->mipi_1_1v_name);
+ if (IS_ERR(dsim.r_mipi_1_1v)) {
+ dev_err(&pdev->dev, "failed to get regulator %s.\n",
+ dsim.pd->mipi_1_1v_name);
+ goto regulator_get_err;
+ }
+
+ WARN_ON(dsim.pd->mipi_1_8v_name == NULL);
+
+ dsim.r_mipi_1_8v = regulator_get(&pdev->dev, dsim.pd->mipi_1_8v_name);
+ if (IS_ERR(dsim.r_mipi_1_8v)) {
+ dev_err(&pdev->dev, "failed to get regulator %s.\n",
+ dsim.pd->mipi_1_8v_name);
+ goto regulator_get_err;
+ }
+
+ /* clock */
+ dsim.clock = clk_get(&pdev->dev, dsim.pd->clk_name);
+ if (IS_ERR(dsim.clock)) {
+ dev_err(&pdev->dev, "failed to get dsim clock source\n");
+ return -EINVAL;
+ }
+
+ clk_enable(dsim.clock);
+
+ /* io memory */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to get io memory region\n");
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* request mem region */
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request io memory region\n");
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* ioremap for register block */
+ dsim.reg_base = ioremap(res->start, resource_size(res));
+ if (!dsim.reg_base) {
+ dev_err(&pdev->dev, "failed to remap io region\n");
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ /* it is used for MIPI-DSI based lcd panel driver. */
+ dsim.mipi_ddi_pd->dsim_data = (void *)&dsim;
+
+ /*
+ * it uses frame done interrupt handler
+ * only in case of MIPI Video mode.
+ */
+ if (dsim.dsim_lcd_info->e_interface == DSIM_VIDEO) {
+ dsim.irq = platform_get_irq(pdev, 0);
+ if (request_irq(dsim.irq, s5p_dsim_interrupt_handler,
+ IRQF_DISABLED, "mipi-dsi", &dsim)) {
+ dev_err(&pdev->dev, "request_irq failed.\n");
+ goto err_trigger_irq;
+ }
+ }
+
+ if (dsim.pd->mipi_power)
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v,
+ dsim.r_mipi_1_8v, 1);
+ else {
+ dev_err(&pdev->dev, "mipi_power is NULL.\n");
+ goto mipi_power_err;
+ }
+
+ /* find lcd panel driver registered to mipi-dsi driver. */
+ dsim.mipi_drv = scan_mipi_driver(dsim.pd->lcd_panel_name);
+ if (dsim.mipi_drv == NULL) {
+ dev_err(&pdev->dev, "mipi_drv is NULL.\n");
+ goto mipi_drv_err;
+ }
+
+ /* set lcd panel driver link */
+ ret = dsim.mipi_drv->set_link(dsim.mipi_ddi_pd);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to set link.\n");
+ goto mipi_drv_err;
+ }
+
+ dsim.mipi_drv->probe(&pdev->dev);
+
+ s5p_dsim_init_dsim(&dsim);
+ s5p_dsim_init_link(&dsim);
+
+ s5p_dsim_set_hs_enable(&dsim);
+ s5p_dsim_set_data_transfer_mode(&dsim, DSIM_TRANSFER_BYCPU, 1);
+
+ /* it needs delay for stabilization */
+ mdelay(dsim.pd->delay_for_stabilization);
+
+ /* initialize lcd panel */
+ if (dsim.mipi_drv->init)
+ dsim.mipi_drv->init(&pdev->dev);
+ else
+ dev_warn(&pdev->dev, "init func is null.\n");
+
+ if (dsim.mipi_drv->display_on)
+ dsim.mipi_drv->display_on(&pdev->dev);
+ else
+ dev_warn(&pdev->dev, "display_on func is null.\n");
+
+ s5p_dsim_set_display_mode(&dsim, dsim.dsim_lcd_info, NULL);
+
+ s5p_dsim_set_data_transfer_mode(&dsim, DSIM_TRANSFER_BYLCDC, 1);
+
+ s5p_dsim_register_notif(&pdev->dev);
+
+ /* in case of command mode, trigger. */
+ if (dsim.dsim_lcd_info->e_interface == DSIM_COMMAND) {
+ if (dsim.pd->trigger)
+ dsim.pd->trigger(registered_fb[0]);
+ else
+ dev_warn(&pdev->dev, "trigger is null.\n");
+ }
+
+ dev_info(&pdev->dev, "mipi-dsi driver(%s mode) has been probed.\n",
+ (dsim.dsim_lcd_info->e_interface == DSIM_COMMAND) ?
+ "CPU" : "RGB");
+
+ return 0;
+
+err_trigger_irq:
+mipi_drv_err:
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v, dsim.r_mipi_1_8v, 0);
+
+mipi_power_err:
+ iounmap((void __iomem *) dsim.reg_base);
+
+err_clk_disable:
+ clk_disable(dsim.clock);
+
+regulator_get_err:
+
+ return ret;
+
+}
+
+static int s5p_dsim_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+#ifdef CONFIG_PM
+int s5p_dsim_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ dsim.mipi_ddi_pd->resume_complete = 0;
+
+ if (dsim.mipi_drv->suspend)
+ dsim.mipi_drv->suspend(&pdev->dev);
+
+ clk_disable(dsim.clock);
+
+ if (dsim.pd->mipi_power)
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v,
+ dsim.r_mipi_1_8v, 0);
+
+ return 0;
+}
+
+int s5p_dsim_resume(struct platform_device *pdev)
+{
+ if (dsim.pd->mipi_power)
+ dsim.pd->mipi_power(&dsim, dsim.r_mipi_1_1v,
+ dsim.r_mipi_1_8v, 1);
+
+ clk_enable(dsim.clock);
+
+ if (dsim.mipi_drv->resume)
+ dsim.mipi_drv->resume(&pdev->dev);
+
+ s5p_dsim_init_dsim(&dsim);
+ s5p_dsim_init_link(&dsim);
+
+ s5p_dsim_set_hs_enable(&dsim);
+ s5p_dsim_set_data_transfer_mode(&dsim, DSIM_TRANSFER_BYCPU, 1);
+
+ /* it needs delay for stabilization */
+ mdelay(dsim.pd->delay_for_stabilization);
+
+ /* initialize lcd panel */
+ if (dsim.mipi_drv->init)
+ dsim.mipi_drv->init(&pdev->dev);
+ else
+ dev_warn(&pdev->dev, "init func is null.\n");
+
+ s5p_dsim_set_display_mode(&dsim, dsim.dsim_lcd_info, NULL);
+
+ s5p_dsim_set_data_transfer_mode(&dsim, DSIM_TRANSFER_BYLCDC, 1);
+
+ dsim.mipi_ddi_pd->resume_complete = 1;
+
+ return 0;
+}
+#else
+#define s5p_dsim_suspend NULL
+#define s5p_dsim_resume NULL
+#endif
+
+static struct platform_driver s5p_dsim_driver = {
+ .probe = s5p_dsim_probe,
+ .remove = s5p_dsim_remove,
+ .suspend = s5p_dsim_suspend,
+ .resume = s5p_dsim_resume,
+ .driver = {
+ .name = "s5p-dsim",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int s5p_dsim_register(void)
+{
+ platform_driver_register(&s5p_dsim_driver);
+
+ return 0;
+}
+
+static void s5p_dsim_unregister(void)
+{
+ platform_driver_unregister(&s5p_dsim_driver);
+}
+
+module_init(s5p_dsim_register);
+module_exit(s5p_dsim_unregister);
+
+MODULE_AUTHOR("InKi Dae <inki.dae at samsung.com>");
+MODULE_DESCRIPTION("Samusung MIPI-DSIM driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_dsim_common.c b/drivers/video/s5p_dsim_common.c
new file mode 100644
index 0000000..696faf3
--- /dev/null
+++ b/drivers/video/s5p_dsim_common.c
@@ -0,0 +1,691 @@
+/* linux/drivers/video/samsung/s5p_dsim_common.c
+ *
+ * Samsung MIPI-DSIM common driver.
+ *
+ * InKi Dae, <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/ctype.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/memory.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+#include <video/mipi_display.h>
+
+#include <plat/fb.h>
+#include <plat/regs-dsim.h>
+
+#include <mach/map.h>
+#include <plat/dsim.h>
+#include <plat/mipi_ddi.h>
+
+#include "s5p_dsim_lowlevel.h"
+
+static unsigned int dpll_table[15] = {
+ 100, 120, 170, 220, 270,
+ 320, 390, 450, 510, 560,
+ 640, 690, 770, 870, 950 };
+
+static void s5p_dsim_long_data_wr(struct dsim_global *dsim, unsigned int data0,
+ unsigned int data1)
+{
+ unsigned int data_cnt = 0, payload = 0;
+
+ WARN_ON(dsim == NULL);
+
+ /* in case that data count is more then 4 */
+ for (data_cnt = 0; data_cnt < data1; data_cnt += 4) {
+ /*
+ * after sending 4bytes per one time,
+ * send remainder data less then 4.
+ */
+ if ((data1 - data_cnt) < 4) {
+ if ((data1 - data_cnt) == 3) {
+ payload = *(u8 *)(data0 + data_cnt) |
+ (*(u8 *)(data0 + (data_cnt + 1))) << 8 |
+ (*(u8 *)(data0 + (data_cnt + 2))) << 16;
+ dev_dbg(dsim->dev, "count = 3 payload = %x, %x %x %x\n",
+ payload, *(u8 *)(data0 + data_cnt),
+ *(u8 *)(data0 + (data_cnt + 1)),
+ *(u8 *)(data0 + (data_cnt + 2)));
+ } else if ((data1 - data_cnt) == 2) {
+ payload = *(u8 *)(data0 + data_cnt) |
+ (*(u8 *)(data0 + (data_cnt + 1))) << 8;
+ dev_dbg(dsim->dev,
+ "count = 2 payload = %x, %x %x\n", payload,
+ *(u8 *)(data0 + data_cnt),
+ *(u8 *)(data0 + (data_cnt + 1)));
+ } else if ((data1 - data_cnt) == 1) {
+ payload = *(u8 *)(data0 + data_cnt);
+ }
+
+ s5p_dsim_wr_tx_data(dsim, payload);
+ /* send 4bytes per one time. */
+ } else {
+ payload = *(u8 *)(data0 + data_cnt) |
+ (*(u8 *)(data0 + (data_cnt + 1))) << 8 |
+ (*(u8 *)(data0 + (data_cnt + 2))) << 16 |
+ (*(u8 *)(data0 + (data_cnt + 3))) << 24;
+
+ dev_dbg(dsim->dev,
+ "count = 4 payload = %x, %x %x %x %x\n",
+ payload, *(u8 *)(data0 + data_cnt),
+ *(u8 *)(data0 + (data_cnt + 1)),
+ *(u8 *)(data0 + (data_cnt + 2)),
+ *(u8 *)(data0 + (data_cnt + 3)));
+
+ s5p_dsim_wr_tx_data(dsim, payload);
+ }
+ }
+}
+
+int s5p_dsim_wr_data(void *dsim_data, unsigned int data_id,
+ unsigned int data0, unsigned int data1)
+{
+ struct dsim_global *dsim = NULL;
+ unsigned int timeout = 5000 * 2;
+ unsigned long delay_val, udelay;
+ unsigned int check_rx_ack = 0;
+
+ dsim = (struct dsim_global *)dsim_data;
+
+ WARN_ON(dsim == NULL);
+
+ if (dsim->state == DSIM_STATE_ULPS) {
+ dev_err(dsim->dev, "state is ULPS.\n");
+
+ return -EINVAL;
+ }
+
+ delay_val = 1000000 / dsim->dsim_info->esc_clk;
+ udelay = 10 * delay_val;
+
+ mdelay(udelay);
+
+ /* only if transfer mode is LPDT, wait SFR becomes empty. */
+ if (dsim->state == DSIM_STATE_STOP) {
+ while (!(s5p_dsim_get_fifo_state(dsim) &
+ SFR_HEADER_EMPTY)) {
+ if ((timeout--) > 0)
+ mdelay(1);
+ else {
+ dev_err(dsim->dev,
+ "SRF header fifo is not empty.\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ switch (data_id) {
+ /* short packet types of packet types for command. */
+ case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
+ case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
+ case MIPI_DSI_DCS_SHORT_WRITE:
+ case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
+ case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
+ s5p_dsim_wr_tx_header(dsim, data_id, data0, data1);
+ if (check_rx_ack)
+ /* process response func should be implemented */
+ return 0;
+ else
+ return -EINVAL;
+
+ /* general command */
+ case MIPI_DSI_COLOR_MODE_OFF:
+ case MIPI_DSI_COLOR_MODE_ON:
+ case MIPI_DSI_SHUTDOWN_PERIPHERAL:
+ case MIPI_DSI_TURN_ON_PERIPHERAL:
+ s5p_dsim_wr_tx_header(dsim, data_id, data0, data1);
+ if (check_rx_ack)
+ /* process response func should be implemented. */
+ return 0;
+ else
+ return -EINVAL;
+
+ /* packet types for video data */
+ case MIPI_DSI_V_SYNC_START:
+ case MIPI_DSI_V_SYNC_END:
+ case MIPI_DSI_H_SYNC_START:
+ case MIPI_DSI_H_SYNC_END:
+ case MIPI_DSI_END_OF_TRANSMISSION:
+ return 0;
+
+ /* short and response packet types for command */
+ case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
+ case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
+ case MIPI_DSI_DCS_READ:
+ s5p_dsim_clear_interrupt(dsim, 0xffffffff);
+ s5p_dsim_wr_tx_header(dsim, data_id, data0, data1);
+ /* process response func should be implemented. */
+ return 0;
+
+ /* long packet type and null packet */
+ case MIPI_DSI_NULL_PACKET:
+ case MIPI_DSI_BLANKING_PACKET:
+ return 0;
+ case MIPI_DSI_GENERIC_LONG_WRITE:
+ case MIPI_DSI_DCS_LONG_WRITE:
+ {
+ unsigned int size, data_cnt = 0, payload = 0;
+
+ size = data1 * 4;
+
+ /* if data count is less then 4, then send 3bytes data. */
+ if (data1 < 4) {
+ payload = *(u8 *)(data0) |
+ *(u8 *)(data0 + 1) << 8 |
+ *(u8 *)(data0 + 2) << 16;
+
+ s5p_dsim_wr_tx_data(dsim, payload);
+
+ dev_dbg(dsim->dev, "count = %d payload = %x,%x %x %x\n",
+ data1, payload,
+ *(u8 *)(data0 + data_cnt),
+ *(u8 *)(data0 + (data_cnt + 1)),
+ *(u8 *)(data0 + (data_cnt + 2)));
+ /* in case that data count is more then 4 */
+ } else
+ s5p_dsim_long_data_wr(dsim, data0, data1);
+
+ /* put data into header fifo */
+ s5p_dsim_wr_tx_header(dsim, data_id, data1 & 0xff,
+ (data1 & 0xff00) >> 8);
+
+ }
+ if (check_rx_ack)
+ /* process response func should be implemented. */
+ return 0;
+ else
+ return -EINVAL;
+
+ /* packet typo for video data */
+ case MIPI_DSI_PACKED_PIXEL_STREAM_16:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_18:
+ case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
+ case MIPI_DSI_PACKED_PIXEL_STREAM_24:
+ if (check_rx_ack)
+ /* process response func should be implemented. */
+ return 0;
+ else
+ return -EINVAL;
+ default:
+ dev_warn(dsim->dev,
+ "data id %x is not supported current DSI spec.\n",
+ data_id);
+
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+int s5p_dsim_init_header_fifo(struct dsim_global *dsim)
+{
+ unsigned int cnt;
+
+ WARN_ON(dsim == NULL);
+
+ for (cnt = 0; cnt < DSIM_HEADER_FIFO_SZ; cnt++)
+ dsim->header_fifo_index[cnt] = -1;
+
+ return 0;
+}
+
+int s5p_dsim_pll_on(struct dsim_global *dsim, unsigned int enable)
+{
+ WARN_ON(dsim == NULL);
+
+ if (enable) {
+ int sw_timeout = 1000;
+ s5p_dsim_clear_interrupt(dsim, DSIM_PLL_STABLE);
+ s5p_dsim_enable_pll(dsim, 1);
+ while (1) {
+ sw_timeout--;
+ if (s5p_dsim_is_pll_stable(dsim))
+ return 0;
+ if (sw_timeout == 0)
+ return -EINVAL;
+ }
+ } else
+ s5p_dsim_enable_pll(dsim, 0);
+
+ return 0;
+}
+
+unsigned long s5p_dsim_change_pll(struct dsim_global *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler)
+{
+ unsigned long dfin_pll, dfvco, dpll_out;
+ unsigned int i, freq_band = 0xf;
+
+ WARN_ON(dsim == NULL);
+
+ dfin_pll = (MIPI_FIN / pre_divider);
+
+ if (dfin_pll < 6 * 1000 * 1000 || dfin_pll > 12 * 1000 * 1000) {
+ dev_warn(dsim->dev, "warning!!\n");
+ dev_warn(dsim->dev, "fin_pll range is 6MHz ~ 12MHz\n");
+ dev_warn(dsim->dev, "fin_pll of mipi dphy pll is %luMHz\n",
+ (dfin_pll / 1000000));
+
+ s5p_dsim_enable_afc(dsim, 0, 0);
+ } else {
+ if (dfin_pll < 7 * 1000000)
+ s5p_dsim_enable_afc(dsim, 1, 0x1);
+ else if (dfin_pll < 8 * 1000000)
+ s5p_dsim_enable_afc(dsim, 1, 0x0);
+ else if (dfin_pll < 9 * 1000000)
+ s5p_dsim_enable_afc(dsim, 1, 0x3);
+ else if (dfin_pll < 10 * 1000000)
+ s5p_dsim_enable_afc(dsim, 1, 0x2);
+ else if (dfin_pll < 11 * 1000000)
+ s5p_dsim_enable_afc(dsim, 1, 0x5);
+ else
+ s5p_dsim_enable_afc(dsim, 1, 0x4);
+ }
+
+ dfvco = dfin_pll * main_divider;
+ dev_dbg(dsim->dev, "dfvco = %lu, dfin_pll = %lu, main_divider = %d\n",
+ dfvco, dfin_pll, main_divider);
+ if (dfvco < 500000000 || dfvco > 1000000000) {
+ dev_warn(dsim->dev, "Caution!!\n");
+ dev_warn(dsim->dev, "fvco range is 500MHz ~ 1000MHz\n");
+ dev_warn(dsim->dev, "fvco of mipi dphy pll is %luMHz\n",
+ (dfvco / 1000000));
+ }
+
+ dpll_out = dfvco / (1 << scaler);
+ dev_dbg(dsim->dev, "dpll_out = %lu, dfvco = %lu, scaler = %d\n",
+ dpll_out, dfvco, scaler);
+
+ for (i = 0; i < ARRAY_SIZE(dpll_table); i++) {
+ if (dpll_out < dpll_table[i] * 1000000) {
+ freq_band = i;
+ break;
+ }
+ }
+
+ dev_dbg(dsim->dev, "freq_band = %d\n", freq_band);
+
+ s5p_dsim_pll_freq(dsim, pre_divider, main_divider, scaler);
+
+ s5p_dsim_hs_zero_ctrl(dsim, 0);
+ s5p_dsim_prep_ctrl(dsim, 0);
+
+ /* Freq Band */
+ s5p_dsim_pll_freq_band(dsim, freq_band);
+
+ /* Stable time */
+ s5p_dsim_pll_stable_time(dsim,
+ dsim->dsim_info->pll_stable_time);
+
+ /* Enable PLL */
+ dev_dbg(dsim->dev, "FOUT of mipi dphy pll is %luMHz\n",
+ (dpll_out / 1000000));
+
+ return dpll_out;
+}
+
+int s5p_dsim_set_clock(struct dsim_global *dsim,
+ unsigned int byte_clk_sel, unsigned int enable)
+{
+ unsigned int esc_div;
+ unsigned long esc_clk_error_rate;
+
+ WARN_ON(dsim == NULL);
+
+ if (enable) {
+ dsim->e_clk_src = byte_clk_sel;
+
+ /* Escape mode clock and byte clock source */
+ s5p_dsim_set_byte_clock_src(dsim, byte_clk_sel);
+
+ /* DPHY, DSIM Link : D-PHY clock out */
+ if (byte_clk_sel == DSIM_PLL_OUT_DIV8) {
+ dsim->hs_clk = s5p_dsim_change_pll(dsim,
+ dsim->dsim_info->p, dsim->dsim_info->m,
+ dsim->dsim_info->s);
+ if (dsim->hs_clk == 0) {
+ dev_err(dsim->dev,
+ "failed to get hs clock.\n");
+ return -EINVAL;
+ }
+
+ dsim->byte_clk = dsim->hs_clk / 8;
+ s5p_dsim_enable_pll_bypass(dsim, 0);
+ s5p_dsim_pll_on(dsim, 1);
+ /* DPHY : D-PHY clock out, DSIM link : external clock out */
+ } else if (byte_clk_sel == DSIM_EXT_CLK_DIV8)
+ dev_warn(dsim->dev,
+ "this project is not support \
+ external clock source for MIPI DSIM\n");
+ else if (byte_clk_sel == DSIM_EXT_CLK_BYPASS)
+ dev_warn(dsim->dev,
+ "this project is not support \
+ external clock source for MIPI DSIM\n");
+
+ /* escape clock divider */
+ esc_div = dsim->byte_clk / (dsim->dsim_info->esc_clk);
+ dev_dbg(dsim->dev,
+ "esc_div = %d, byte_clk = %lu, esc_clk = %lu\n",
+ esc_div, dsim->byte_clk, dsim->dsim_info->esc_clk);
+ if ((dsim->byte_clk / esc_div) >= 20000000 ||
+ (dsim->byte_clk / esc_div) > dsim->dsim_info->esc_clk)
+ esc_div += 1;
+
+ dsim->escape_clk = dsim->byte_clk / esc_div;
+ dev_dbg(dsim->dev,
+ "escape_clk = %lu, byte_clk = %lu, esc_div = %d\n",
+ dsim->escape_clk, dsim->byte_clk, esc_div);
+
+ /*
+ * enable escclk on lane
+ *
+ * in case of evt0, DSIM_TRUE is enable and
+ * DSIM_FALSE is enable for evt1.
+ */
+ if (dsim->pd->platform_rev == 1)
+ s5p_dsim_enable_byte_clock(dsim, DSIM_FALSE);
+ else
+ s5p_dsim_enable_byte_clock(dsim, DSIM_TRUE);
+
+ /* enable byte clk and escape clock */
+ s5p_dsim_set_esc_clk_prs(dsim, 1, esc_div);
+ /* escape clock on lane */
+ s5p_dsim_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 1);
+
+ dev_dbg(dsim->dev, "byte clock is %luMHz\n",
+ (dsim->byte_clk / 1000000));
+ dev_dbg(dsim->dev, "escape clock that user's need is %lu\n",
+ (dsim->dsim_info->esc_clk / 1000000));
+ dev_dbg(dsim->dev, "escape clock divider is %x\n", esc_div);
+ dev_dbg(dsim->dev, "escape clock is %luMHz\n",
+ ((dsim->byte_clk / esc_div) / 1000000));
+
+ if ((dsim->byte_clk / esc_div) > dsim->escape_clk) {
+ esc_clk_error_rate = dsim->escape_clk /
+ (dsim->byte_clk / esc_div);
+ dev_warn(dsim->dev, "error rate is %lu over.\n",
+ (esc_clk_error_rate / 100));
+ } else if ((dsim->byte_clk / esc_div) < (dsim->escape_clk)) {
+ esc_clk_error_rate = (dsim->byte_clk / esc_div) /
+ dsim->escape_clk;
+ dev_warn(dsim->dev, "error rate is %lu under.\n",
+ (esc_clk_error_rate / 100));
+ }
+ } else {
+ s5p_dsim_enable_esc_clk_on_lane(dsim,
+ (DSIM_LANE_CLOCK | dsim->data_lane), 0);
+ s5p_dsim_set_esc_clk_prs(dsim, 0, 0);
+
+ /*
+ * in case of evt0, DSIM_FALSE is disable and
+ * DSIM_TRUE is disable for evt1.
+ */
+ if (dsim->pd->platform_rev == 1)
+ s5p_dsim_enable_byte_clock(dsim, DSIM_TRUE);
+ else
+ s5p_dsim_enable_byte_clock(dsim, DSIM_FALSE);
+
+ if (byte_clk_sel == DSIM_PLL_OUT_DIV8)
+ s5p_dsim_pll_on(dsim, 0);
+ }
+
+ return 0;
+}
+
+int s5p_dsim_init_dsim(struct dsim_global *dsim)
+{
+ WARN_ON(dsim == NULL);
+
+ if (dsim->pd->init_d_phy)
+ dsim->pd->init_d_phy(dsim);
+
+ dsim->state = DSIM_STATE_RESET;
+
+ switch (dsim->dsim_info->e_no_data_lane) {
+ case DSIM_DATA_LANE_1:
+ dsim->data_lane = DSIM_LANE_DATA0;
+ break;
+ case DSIM_DATA_LANE_2:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1;
+ break;
+ case DSIM_DATA_LANE_3:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2;
+ break;
+ case DSIM_DATA_LANE_4:
+ dsim->data_lane = DSIM_LANE_DATA0 | DSIM_LANE_DATA1 |
+ DSIM_LANE_DATA2 | DSIM_LANE_DATA3;
+ break;
+ default:
+ dev_info(dsim->dev, "data lane is invalid.\n");
+ return -EINVAL;
+ };
+
+ s5p_dsim_init_header_fifo(dsim);
+ s5p_dsim_sw_reset(dsim);
+ s5p_dsim_dp_dn_swap(dsim, dsim->dsim_info->e_lane_swap);
+
+ return 0;
+}
+
+int s5p_dsim_enable_frame_done_int(struct dsim_global *dsim,
+ unsigned int enable)
+{
+ /* enable only frame done interrupt */
+ s5p_dsim_set_interrupt_mask(dsim, INTMSK_FRAME_DONE, enable);
+
+ return 0;
+}
+
+int s5p_dsim_set_display_mode(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd, struct dsim_lcd_config *sub_lcd)
+{
+ struct fb_videomode *mlcd_video = NULL;
+ struct fb_cmdmode *mlcd_command = NULL;
+ struct s3c_fb_pd_win *pd;
+ unsigned int width = 0, height = 0;
+
+ WARN_ON(dsim == NULL);
+
+ pd = (struct s3c_fb_pd_win *)main_lcd->lcd_panel_info;
+
+ /* in case of VIDEO MODE (RGB INTERFACE) */
+ if (dsim->dsim_lcd_info->e_interface == (u32) DSIM_VIDEO) {
+ mlcd_video = (struct fb_videomode *)&pd->win_mode;
+ width = mlcd_video->xres;
+ height = mlcd_video->yres;
+
+ if (dsim->dsim_info->auto_vertical_cnt == DSIM_FALSE) {
+ s5p_dsim_set_main_disp_vporch(dsim,
+ mlcd_video->upper_margin,
+ mlcd_video->lower_margin, 0);
+ s5p_dsim_set_main_disp_hporch(dsim,
+ mlcd_video->left_margin,
+ mlcd_video->right_margin);
+ s5p_dsim_set_main_disp_sync_area(dsim,
+ mlcd_video->vsync_len,
+ mlcd_video->hsync_len);
+ }
+ } else { /* in case of COMMAND MODE (CPU or I80 INTERFACE) */
+ mlcd_command = (struct fb_cmdmode *)&pd->cmd_mode;
+ width = mlcd_command->xres;
+ height = mlcd_command->yres;
+ }
+
+ s5p_dsim_set_main_disp_resol(dsim, height, width);
+
+ if (sub_lcd != NULL)
+ dev_warn(dsim->dev, "sub lcd isn't supported yet.\n");
+
+ s5p_dsim_display_config(dsim, dsim->dsim_lcd_info, NULL);
+
+ return 0;
+}
+
+int s5p_dsim_init_link(struct dsim_global *dsim)
+{
+ unsigned int time_out = 100;
+
+ WARN_ON(dsim == NULL);
+
+ switch (dsim->state) {
+ case DSIM_STATE_RESET:
+ s5p_dsim_sw_reset(dsim);
+ case DSIM_STATE_INIT:
+ s5p_dsim_init_fifo_pointer(dsim, 0x1f);
+
+ /* dsi configuration */
+ s5p_dsim_init_config(dsim, dsim->dsim_lcd_info,
+ NULL, dsim->dsim_info);
+ s5p_dsim_enable_lane(dsim, DSIM_LANE_CLOCK, 1);
+ s5p_dsim_enable_lane(dsim, dsim->data_lane, 1);
+
+ /* set clock configuration */
+ s5p_dsim_set_clock(dsim, dsim->dsim_info->e_byte_clk,
+ 1);
+
+ /* check clock and data lane state is stop state */
+ while (!(s5p_dsim_is_lane_state(dsim, DSIM_LANE_CLOCK)
+ == DSIM_LANE_STATE_STOP) &&
+ !(s5p_dsim_is_lane_state(dsim,
+ dsim->data_lane) == DSIM_LANE_STATE_STOP)) {
+ time_out--;
+ if (time_out == 0) {
+ dev_info(dsim->dev,
+ "DSI Master is not stop state.\n");
+ dev_info(dsim->dev,
+ "Check initialization process\n");
+
+ return -EINVAL;
+ }
+ }
+
+ if (time_out != 0) {
+ dev_info(dsim->dev,
+ "initialization of DSI Master is successful\n");
+ dev_info(dsim->dev, "DSI Master state is stop state\n");
+ }
+
+ dsim->state = DSIM_STATE_STOP;
+
+ /* BTA sequence counters */
+ s5p_dsim_set_stop_state_counter(dsim,
+ dsim->dsim_info->stop_holding_cnt);
+ s5p_dsim_set_bta_timeout(dsim,
+ dsim->dsim_info->bta_timeout);
+ s5p_dsim_set_lpdr_timeout(dsim,
+ dsim->dsim_info->rx_timeout);
+
+ /* default LPDT by both cpu and lcd controller */
+ s5p_dsim_set_data_mode(dsim, DSIM_TRANSFER_BOTH,
+ DSIM_STATE_STOP);
+
+ return 0;
+ default:
+ dev_info(dsim->dev, "DSI Master is already init.\n");
+ return 0;
+ }
+
+ return 0;
+}
+
+int s5p_dsim_set_hs_enable(struct dsim_global *dsim)
+{
+ WARN_ON(dsim == NULL);
+
+ if (dsim->state == DSIM_STATE_STOP) {
+ if (dsim->e_clk_src != DSIM_EXT_CLK_BYPASS) {
+ dsim->state = DSIM_STATE_HSCLKEN;
+ s5p_dsim_set_data_mode(dsim,
+ DSIM_TRANSFER_BOTH, DSIM_STATE_HSCLKEN);
+ s5p_dsim_enable_hs_clock(dsim, 1);
+
+ return 0;
+ } else
+ dev_warn(dsim->dev,
+ "clock source is external bypass.\n");
+ } else
+ dev_warn(dsim->dev, "DSIM is not stop state.\n");
+
+ return 0;
+}
+
+int s5p_dsim_set_data_transfer_mode(struct dsim_global *dsim,
+ unsigned int data_path, unsigned int hs_enable)
+{
+ int ret = -1;
+
+ WARN_ON(dsim == NULL);
+
+ if (hs_enable) {
+ if (dsim->state == DSIM_STATE_HSCLKEN) {
+ s5p_dsim_set_data_mode(dsim, data_path,
+ DSIM_STATE_HSCLKEN);
+ ret = 0;
+ } else {
+ dev_err(dsim->dev, "HS Clock lane is not enabled.\n");
+ ret = -EINVAL;
+ }
+ } else {
+ if (dsim->state == DSIM_STATE_INIT || dsim->state ==
+ DSIM_STATE_ULPS) {
+ dev_err(dsim->dev,
+ "DSI Master is not STOP or HSDT state.\n");
+ ret = -EINVAL;
+ } else {
+ s5p_dsim_set_data_mode(dsim, data_path,
+ DSIM_STATE_STOP);
+ ret = 0;
+ }
+ }
+
+ return ret;
+}
+
+int s5p_dsim_get_frame_done_status(void *dsim_data)
+{
+ struct dsim_global *dsim = NULL;
+
+ dsim = (struct dsim_global *)dsim_data;
+
+ WARN_ON(dsim == NULL);
+
+ return _s5p_dsim_get_frame_done_status(dsim);
+}
+
+int s5p_dsim_clear_frame_done(void *dsim_data)
+{
+ struct dsim_global *dsim = NULL;
+
+ dsim = (struct dsim_global *)dsim_data;
+
+ WARN_ON(dsim == NULL);
+
+ _s5p_dsim_clear_frame_done(dsim);
+
+ return 0;
+}
+
+MODULE_AUTHOR("InKi Dae <inki.dae at samsung.com>");
+MODULE_DESCRIPTION("Samusung MIPI-DSIM common driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/s5p_dsim_common.h b/drivers/video/s5p_dsim_common.h
new file mode 100644
index 0000000..95f51bc
--- /dev/null
+++ b/drivers/video/s5p_dsim_common.h
@@ -0,0 +1,35 @@
+/* linux/drivers/video/samsung/s5p_dsim_common.h
+ *
+ * Header file for Samsung MIPI-DSI common driver.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_DSIM_COMMON_H
+#define _S5P_DSIM_COMMON_H
+
+extern int s5p_dsim_init_header_fifo(struct dsim_global *dsim);
+extern int s5p_dsim_pll_on(struct dsim_global *dsim, unsigned int enable);
+extern unsigned long s5p_dsim_change_pll(struct dsim_global *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler);
+extern int s5p_dsim_set_clock(struct dsim_global *dsim,
+ unsigned int byte_clk_sel, unsigned int enable);
+extern int s5p_dsim_init_dsim(struct dsim_global *dsim);
+extern int s5p_dsim_set_display_mode(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd, struct dsim_lcd_config *sub_lcd);
+extern int s5p_dsim_init_link(struct dsim_global *dsim);
+extern int s5p_dsim_set_hs_enable(struct dsim_global *dsim);
+extern int s5p_dsim_set_data_transfer_mode(struct dsim_global *dsim,
+ unsigned int data_path, unsigned int hs_enable);
+extern int s5p_dsim_enable_frame_done_int(struct dsim_global *dsim,
+ unsigned int enable);
+
+extern struct fb_info *registered_fb[FB_MAX] __read_mostly;
+
+#endif /* _S5P_DSIM_COMMON_H */
diff --git a/drivers/video/s5p_dsim_lowlevel.c b/drivers/video/s5p_dsim_lowlevel.c
new file mode 100644
index 0000000..b2fc249
--- /dev/null
+++ b/drivers/video/s5p_dsim_lowlevel.c
@@ -0,0 +1,569 @@
+/* linux/drivers/video/samsung/s5p-dsim.c
+ *
+ * Samsung MIPI-DSIM lowlevel driver.
+ *
+ * InKi Dae, <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/ctype.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/dsim.h>
+#include <plat/mipi_ddi.h>
+#include <plat/regs-dsim.h>
+
+void s5p_dsim_func_reset(struct dsim_global *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_FUNCRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_dsim_sw_reset(struct dsim_global *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_SWRST);
+
+ reg |= DSIM_SWRST;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SWRST);
+}
+
+void s5p_dsim_set_interrupt_mask(struct dsim_global *dsim, unsigned int mode,
+ unsigned int mask)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTMSK);
+
+ if (mask)
+ reg |= mode;
+ else
+ reg &= ~mode;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTMSK);
+}
+
+void s5p_dsim_init_fifo_pointer(struct dsim_global *dsim, unsigned int cfg)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL);
+
+ writel(reg & ~(cfg), dsim->reg_base + S5P_DSIM_FIFOCTRL);
+ mdelay(10);
+ reg |= cfg;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_FIFOCTRL);
+}
+
+/*
+ * this function set PLL P, M and S value in D-PHY
+ */
+void s5p_dsim_set_phy_tunning(struct dsim_global *dsim, unsigned int value)
+{
+ writel(DSIM_AFC_CTL(value), dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_dsim_set_main_disp_resol(struct dsim_global *dsim,
+ unsigned int vert_resol, unsigned int hori_resol)
+{
+ unsigned int reg;
+
+ /* standby should be set after configuration so set to not ready*/
+ reg = (readl(dsim->reg_base + S5P_DSIM_MDRESOL)) &
+ ~(DSIM_MAIN_STAND_BY);
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+
+ reg &= ~(0x7ff << 16) & ~(0x7ff << 0);
+ reg |= DSIM_MAIN_VRESOL(vert_resol) | DSIM_MAIN_HRESOL(hori_resol);
+
+ reg |= DSIM_MAIN_STAND_BY;
+ writel(reg, dsim->reg_base + S5P_DSIM_MDRESOL);
+}
+
+void s5p_dsim_set_main_disp_vporch(struct dsim_global *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MVPORCH)) &
+ ~(DSIM_CMD_ALLOW_MASK) & ~(DSIM_STABLE_VFP_MASK) &
+ ~(DSIM_MAIN_VBP_MASK);
+
+ reg |= ((cmd_allow & 0xf) << DSIM_CMD_ALLOW_SHIFT) |
+ ((vfront & 0x7ff) << DSIM_STABLE_VFP_SHIFT) |
+ ((vback & 0x7ff) << DSIM_MAIN_VBP_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MVPORCH);
+}
+
+void s5p_dsim_set_main_disp_hporch(struct dsim_global *dsim,
+ unsigned int front, unsigned int back)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MHPORCH)) &
+ ~(DSIM_MAIN_HFP_MASK) & ~(DSIM_MAIN_HBP_MASK);
+
+ reg |= (front << DSIM_MAIN_HFP_SHIFT) | (back << DSIM_MAIN_HBP_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MHPORCH);
+}
+
+void s5p_dsim_set_main_disp_sync_area(struct dsim_global *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_MSYNC)) &
+ ~(DSIM_MAIN_VSA_MASK) & ~(DSIM_MAIN_HSA_MASK);
+
+ reg |= ((vert & 0x3ff) << DSIM_MAIN_VSA_SHIFT) |
+ (hori << DSIM_MAIN_HSA_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_MSYNC);
+}
+
+void s5p_dsim_set_sub_disp_resol(struct dsim_global *dsim,
+ unsigned int vert, unsigned int hori)
+{
+ unsigned int reg;
+
+ reg = (readl(dsim->reg_base + S5P_DSIM_SDRESOL)) &
+ ~(DSIM_SUB_STANDY_MASK);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg &= ~(DSIM_SUB_VRESOL_MASK) | ~(DSIM_SUB_HRESOL_MASK);
+ reg |= ((vert & 0x7ff) << DSIM_SUB_VRESOL_SHIFT) |
+ ((hori & 0x7ff) << DSIM_SUB_HRESOL_SHIFT);
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+
+ reg |= (1 << DSIM_SUB_STANDY_SHIFT);
+ writel(reg, dsim->reg_base + S5P_DSIM_SDRESOL);
+}
+
+void s5p_dsim_init_config(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd_info,
+ struct dsim_lcd_config *sub_lcd_info, struct dsim_config *dsim_info)
+{
+ unsigned int cfg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~(1 << 28) & ~(0x1f << 20) & ~(0x3 << 5);
+
+ cfg = (dsim_info->auto_flush << 29) |
+ (dsim_info->eot_disable << 28) |
+ (dsim_info->auto_vertical_cnt << DSIM_AUTO_MODE_SHIFT) |
+ (dsim_info->hse << DSIM_HSE_MODE_SHIFT) |
+ (dsim_info->hfp << DSIM_HFP_MODE_SHIFT) |
+ (dsim_info->hbp << DSIM_HBP_MODE_SHIFT) |
+ (dsim_info->hsa << DSIM_HSA_MODE_SHIFT) |
+ (dsim_info->e_no_data_lane << DSIM_NUM_OF_DATALANE_SHIFT);
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_dsim_display_config(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd, struct dsim_lcd_config *sub_lcd)
+{
+ u32 reg = (readl(dsim->reg_base + S5P_DSIM_CONFIG)) &
+ ~(0x3 << 26) & ~(1 << 25) & ~(0x3 << 18) & ~(0x7 << 12) &
+ ~(0x3 << 16) & ~(0x7 << 8);
+
+ if (main_lcd->e_interface == DSIM_VIDEO)
+ reg |= (1 << 25);
+ else if (main_lcd->e_interface == DSIM_COMMAND)
+ reg &= ~(1 << 25);
+ else {
+ dev_err(dsim->dev, "this ddi is not MIPI interface.\n");
+ return;
+ }
+
+ /* main lcd */
+ reg |= ((u8) (main_lcd->parameter[DSI_VIDEO_MODE_SEL]) & 0x3) << 26 |
+ ((u8) (main_lcd->parameter[DSI_VIRTUAL_CH_ID]) & 0x3) << 18 |
+ ((u8) (main_lcd->parameter[DSI_FORMAT]) & 0x7) << 12;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_dsim_enable_lane(struct dsim_global *dsim, unsigned int lane,
+ unsigned int enable)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_CONFIG);
+
+ if (lane == DSIM_LANE_CLOCK) {
+ if (enable)
+ reg |= (1 << 0);
+ else
+ reg &= ~(1 << 0);
+ } else {
+ if (enable)
+ reg |= (lane << 1);
+ else
+ reg &= ~(lane << 1);
+ }
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+
+void s5p_dsim_set_data_lane_number(struct dsim_global *dsim,
+ unsigned int count)
+{
+ unsigned int cfg;
+
+ /* get the data lane number. */
+ cfg = DSIM_NUM_OF_DATA_LANE(count);
+
+ writel(cfg, dsim->reg_base + S5P_DSIM_CONFIG);
+}
+
+void s5p_dsim_enable_afc(struct dsim_global *dsim, unsigned int enable,
+ unsigned int afc_code)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR);
+
+ if (enable) {
+ reg |= (1 << 14);
+ reg &= ~(0x7 << 5);
+ reg |= (afc_code & 0x7) << 5;
+ } else
+ reg &= ~(1 << 14);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR);
+}
+
+void s5p_dsim_enable_pll_bypass(struct dsim_global *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(DSIM_PLL_BYPASS_EXTERNAL);
+
+ reg |= enable << DSIM_PLL_BYPASS_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_set_pll_pms(struct dsim_global *dsim, unsigned int p,
+ unsigned int m, unsigned int s)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PLLCTRL);
+
+ reg |= ((p & 0x3f) << 13) | ((m & 0x1ff) << 4) | ((s & 0x7) << 1);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_pll_freq_band(struct dsim_global *dsim, unsigned int freq_band)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x1f << DSIM_FREQ_BAND_SHIFT);
+
+ reg |= ((freq_band & 0x1f) << DSIM_FREQ_BAND_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_pll_freq(struct dsim_global *dsim, unsigned int pre_divider,
+ unsigned int main_divider, unsigned int scaler)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7ffff << 1);
+
+ reg |= (pre_divider & 0x3f) << 13 | (main_divider & 0x1ff) << 4 |
+ (scaler & 0x7) << 1;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_pll_stable_time(struct dsim_global *dsim,
+ unsigned int lock_time)
+{
+ writel(lock_time, dsim->reg_base + S5P_DSIM_PLLTMR);
+}
+
+void s5p_dsim_enable_pll(struct dsim_global *dsim, unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x1 << DSIM_PLL_EN_SHIFT);
+
+ reg |= ((enable & 0x1) << DSIM_PLL_EN_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_set_byte_clock_src(struct dsim_global *dsim, unsigned int src)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(0x3 << DSIM_BYTE_CLK_SRC_SHIFT);
+
+ reg |= ((unsigned int) src) << DSIM_BYTE_CLK_SRC_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_enable_byte_clock(struct dsim_global *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(1 << DSIM_BYTE_CLKEN_SHIFT);
+
+ reg |= enable << DSIM_BYTE_CLKEN_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_set_esc_clk_prs(struct dsim_global *dsim, unsigned int enable,
+ unsigned int prs_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(1 << DSIM_ESC_CLKEN_SHIFT) & ~(0xffff);
+
+ reg |= enable << DSIM_ESC_CLKEN_SHIFT;
+ if (enable)
+ reg |= prs_val;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_enable_esc_clk_on_lane(struct dsim_global *dsim,
+ unsigned int lane_sel, unsigned int enable)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_CLKCTRL);
+
+ if (enable) {
+ if (lane_sel & DSIM_LANE_CLOCK)
+ reg |= 1 << DSIM_LANE_ESC_CLKEN_SHIFT;
+ if (lane_sel & DSIM_LANE_DATA0)
+ reg |= 1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 1);
+ if (lane_sel & DSIM_LANE_DATA1)
+ reg |= 1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 2);
+ if (lane_sel & DSIM_LANE_DATA2)
+ reg |= 1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 3);
+ if (lane_sel & DSIM_LANE_DATA2)
+ reg |= 1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 4);
+ } else {
+ if (lane_sel & DSIM_LANE_CLOCK)
+ reg &= ~(1 << DSIM_LANE_ESC_CLKEN_SHIFT);
+ if (lane_sel & DSIM_LANE_DATA0)
+ reg &= ~(1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 1));
+ if (lane_sel & DSIM_LANE_DATA1)
+ reg &= ~(1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 2));
+ if (lane_sel & DSIM_LANE_DATA2)
+ reg &= ~(1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 3));
+ if (lane_sel & DSIM_LANE_DATA2)
+ reg &= ~(1 << (DSIM_LANE_ESC_CLKEN_SHIFT + 4));
+ }
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_force_dphy_stop_state(struct dsim_global *dsim,
+ unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(0x1 << DSIM_FORCE_STOP_STATE_SHIFT);
+
+ reg |= ((enable & 0x1) << DSIM_FORCE_STOP_STATE_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+unsigned int s5p_dsim_is_lane_state(struct dsim_global *dsim,
+ unsigned int lane)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ if ((lane & DSIM_LANE_ALL) > DSIM_LANE_CLOCK) { /* all lane state */
+ if ((reg & 0x7ff) ^ (((lane & 0xf) << 4) | (1 << 9)))
+ return DSIM_LANE_STATE_ULPS;
+ else if ((reg & 0x7ff) ^ (((lane & 0xf) << 0) | (1 << 8)))
+ return DSIM_LANE_STATE_STOP;
+ else {
+ dev_err(dsim->dev, "land state is unknown.\n");
+ return -1;
+ }
+ } else if (lane & DSIM_LANE_DATA_ALL) { /* data lane */
+ if (reg & (lane << 4))
+ return DSIM_LANE_STATE_ULPS;
+ else if (reg & (lane << 0))
+ return DSIM_LANE_STATE_STOP;
+ else {
+ dev_err(dsim->dev, "data lane state is unknown.\n");
+ return -1;
+ }
+ } else if (lane & DSIM_LANE_CLOCK) { /* clock lane */
+ if (reg & (1 << 9))
+ return DSIM_LANE_STATE_ULPS;
+ else if (reg & (1 << 8))
+ return DSIM_LANE_STATE_STOP;
+ else if (reg & (1 << 10))
+ return DSIM_LANE_STATE_HS_READY;
+ else {
+ dev_err(dsim->dev, "data lane state is unknown.\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+void s5p_dsim_set_stop_state_counter(struct dsim_global *dsim,
+ unsigned int cnt_val)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_ESCMODE)) &
+ ~(0x7ff << DSIM_STOP_STATE_CNT_SHIFT);
+
+ reg |= ((cnt_val & 0x7ff) << DSIM_STOP_STATE_CNT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_dsim_set_bta_timeout(struct dsim_global *dsim, unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(0xff << DSIM_BTA_TOUT_SHIFT);
+
+ reg |= (timeout << DSIM_BTA_TOUT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_dsim_set_lpdr_timeout(struct dsim_global *dsim,
+ unsigned int timeout)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_TIMEOUT)) &
+ ~(0xffff << DSIM_LPDR_TOUT_SHIFT);
+
+ reg |= (timeout << DSIM_LPDR_TOUT_SHIFT);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_TIMEOUT);
+}
+
+void s5p_dsim_set_data_mode(struct dsim_global *dsim, unsigned int data,
+ unsigned int state)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_ESCMODE);
+
+ if (state == DSIM_STATE_HSCLKEN)
+ reg &= ~data;
+ else
+ reg |= data;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_ESCMODE);
+}
+
+void s5p_dsim_enable_hs_clock(struct dsim_global *dsim, unsigned int enable)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_CLKCTRL)) &
+ ~(1 << DSIM_TX_REQUEST_HSCLK_SHIFT);
+
+ reg |= enable << DSIM_TX_REQUEST_HSCLK_SHIFT;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_CLKCTRL);
+}
+
+void s5p_dsim_dp_dn_swap(struct dsim_global *dsim, unsigned int swap_en)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_PHYACCHR1);
+
+ reg &= ~(0x3 << 0);
+ reg |= (swap_en & 0x3) << 0;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PHYACCHR1);
+}
+
+void s5p_dsim_hs_zero_ctrl(struct dsim_global *dsim, unsigned int hs_zero)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0xf << 28);
+
+ reg |= ((hs_zero & 0xf) << 28);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_prep_ctrl(struct dsim_global *dsim, unsigned int prep)
+{
+ unsigned int reg = (readl(dsim->reg_base + S5P_DSIM_PLLCTRL)) &
+ ~(0x7 << 20);
+
+ reg |= ((prep & 0x7) << 20);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PLLCTRL);
+}
+
+void s5p_dsim_clear_interrupt(struct dsim_global *dsim, unsigned int int_src)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ reg |= int_src;
+
+ writel(reg, dsim->reg_base + S5P_DSIM_INTSRC);
+}
+
+unsigned int s5p_dsim_is_pll_stable(struct dsim_global *dsim)
+{
+ unsigned int reg;
+
+ reg = readl(dsim->reg_base + S5P_DSIM_STATUS);
+
+ return reg & (1 << 31) ? 1 : 0;
+}
+
+unsigned int s5p_dsim_get_fifo_state(struct dsim_global *dsim)
+{
+ unsigned int ret;
+
+ ret = readl(dsim->reg_base + S5P_DSIM_FIFOCTRL) & ~(0x1f);
+
+ return ret;
+}
+
+void s5p_dsim_wr_tx_header(struct dsim_global *dsim,
+ unsigned int di, unsigned int data0, unsigned int data1)
+{
+ unsigned int reg = (data1 << 16) | (data0 << 8) | ((di & 0x3f) << 0);
+
+ writel(reg, dsim->reg_base + S5P_DSIM_PKTHDR);
+}
+
+unsigned int _s5p_dsim_get_frame_done_status(struct dsim_global *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ return (reg & INTSRC_FRAME_DONE) ? 1 : 0;
+}
+
+void _s5p_dsim_clear_frame_done(struct dsim_global *dsim)
+{
+ unsigned int reg = readl(dsim->reg_base + S5P_DSIM_INTSRC);
+
+ writel(reg | INTSRC_FRAME_DONE, dsim->reg_base +
+ S5P_DSIM_INTSRC);
+}
+
+void s5p_dsim_wr_tx_data(struct dsim_global *dsim, unsigned int tx_data)
+{
+ writel(tx_data, dsim->reg_base + S5P_DSIM_PAYLOAD);
+}
diff --git a/drivers/video/s5p_dsim_lowlevel.h b/drivers/video/s5p_dsim_lowlevel.h
new file mode 100644
index 0000000..22f7529
--- /dev/null
+++ b/drivers/video/s5p_dsim_lowlevel.h
@@ -0,0 +1,101 @@
+/* linux/drivers/video/samsung/s5p_dsim_lowlevel.h
+ *
+ * Header file for Samsung MIPI-DSIM lowlevel driver.
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * InKi Dae <inki.dae at samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef _S5P_DSIM_LOWLEVEL_H
+#define _S5P_DSIM_LOWLEVEL_H
+
+struct dsim_global;
+
+extern void s5p_dsim_func_reset(struct dsim_global *dsim);
+extern void s5p_dsim_sw_reset(struct dsim_global *dsim);
+extern void s5p_dsim_set_interrupt_mask(struct dsim_global *dsim,
+ unsigned int mode, unsigned int mask);
+extern void s5p_dsim_set_data_lane_number(struct dsim_global *dsim,
+ unsigned int count);
+extern void s5p_dsim_init_fifo_pointer(struct dsim_global *dsim,
+ unsigned int cfg);
+extern void s5p_dsim_set_phy_tunning(struct dsim_global *dsim,
+ unsigned int value);
+extern void s5p_dsim_set_phy_tunning(struct dsim_global *dsim,
+ unsigned int value);
+extern void s5p_dsim_set_main_disp_resol(struct dsim_global *dsim,
+ unsigned int vert_resol, unsigned int hori_resol);
+extern void s5p_dsim_set_main_disp_vporch(struct dsim_global *dsim,
+ unsigned int cmd_allow, unsigned int vfront, unsigned int vback);
+extern void s5p_dsim_set_main_disp_hporch(struct dsim_global *dsim,
+ unsigned int front, unsigned int back);
+extern void s5p_dsim_set_main_disp_sync_area(struct dsim_global *dsim,
+ unsigned int vert, unsigned int hori);
+extern void s5p_dsim_set_sub_disp_resol(struct dsim_global *dsim,
+ unsigned int vert, unsigned int hori);
+extern void s5p_dsim_init_config(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd_info,
+ struct dsim_lcd_config *sub_lcd_info, struct dsim_config *dsim_info);
+extern void s5p_dsim_display_config(struct dsim_global *dsim,
+ struct dsim_lcd_config *main_lcd, struct dsim_lcd_config *sub_lcd);
+extern void s5p_dsim_set_data_lane_number(struct dsim_global *dsim,
+ unsigned int count);
+extern void s5p_dsim_enable_lane(struct dsim_global *dsim, unsigned int lane,
+ unsigned int enable);
+extern void s5p_dsim_enable_afc(struct dsim_global *dsim, unsigned int enable,
+ unsigned int afc_code);
+extern void s5p_dsim_enable_pll_bypass(struct dsim_global *dsim,
+ unsigned int enable);
+extern void s5p_dsim_set_pll_pms(struct dsim_global *dsim, unsigned int p,
+ unsigned int m, unsigned int s);
+extern void s5p_dsim_pll_freq_band(struct dsim_global *dsim,
+ unsigned int freq_band);
+extern void s5p_dsim_pll_freq(struct dsim_global *dsim,
+ unsigned int pre_divider, unsigned int main_divider,
+ unsigned int scaler);
+extern void s5p_dsim_pll_stable_time(struct dsim_global *dsim,
+ unsigned int lock_time);
+extern void s5p_dsim_enable_pll(struct dsim_global *dsim,
+ unsigned int enable);
+extern void s5p_dsim_set_byte_clock_src(struct dsim_global *dsim,
+ unsigned int src);
+extern void s5p_dsim_enable_byte_clock(struct dsim_global *dsim,
+ unsigned int enable);
+extern void s5p_dsim_set_esc_clk_prs(struct dsim_global *dsim,
+ unsigned int enable, unsigned int prs_val);
+extern void s5p_dsim_enable_esc_clk_on_lane(struct dsim_global *dsim,
+ unsigned int lane_sel, unsigned int enable);
+extern void s5p_dsim_force_dphy_stop_state(struct dsim_global *dsim,
+ unsigned int enable);
+extern unsigned int s5p_dsim_is_lane_state(struct dsim_global *dsim,
+ unsigned int lane);
+extern void s5p_dsim_set_stop_state_counter(struct dsim_global *dsim,
+ unsigned int cnt_val);
+extern void s5p_dsim_set_bta_timeout(struct dsim_global *dsim,
+ unsigned int timeout);
+extern void s5p_dsim_set_lpdr_timeout(struct dsim_global *dsim,
+ unsigned int timeout);
+extern void s5p_dsim_set_data_mode(struct dsim_global *dsim,
+ unsigned int data, unsigned int state);
+extern void s5p_dsim_enable_hs_clock(struct dsim_global *dsim,
+ unsigned int enable);
+extern void s5p_dsim_dp_dn_swap(struct dsim_global *dsim,
+ unsigned int swap_en);
+extern void s5p_dsim_hs_zero_ctrl(struct dsim_global *dsim,
+ unsigned int hs_zero);
+extern void s5p_dsim_prep_ctrl(struct dsim_global *dsim, unsigned int prep);
+extern void s5p_dsim_clear_interrupt(struct dsim_global *dsim,
+ unsigned int int_src);
+extern unsigned int s5p_dsim_is_pll_stable(struct dsim_global *dsim);
+extern unsigned int s5p_dsim_get_fifo_state(struct dsim_global *dsim);
+extern unsigned int _s5p_dsim_get_frame_done_status(struct dsim_global *dsim);
+extern void _s5p_dsim_clear_frame_done(struct dsim_global *dsim);
+extern void s5p_dsim_wr_tx_header(struct dsim_global *dsim,
+ unsigned int di, unsigned int data0, unsigned int data1);
+extern void s5p_dsim_wr_tx_data(struct dsim_global *dsim, unsigned int tx_data);
+
+#endif /* _S5P_DSIM_LOWLEVEL_H */
More information about the linux-arm-kernel
mailing list