[PATCH v1 2/2] S5PV210: Add MIPI-DSI Driver.

[Guennadi Liakhovetski]

On Mon, 5 Jul 2010, In-Ki Dae wrote:

> Hi, Guennadi,
> 
> You mean is that it uses include/video/mipi_display.h file instead of plat/dsim.h?
> I cann't find mipi_display.h in mainline kernel.

Sorry for not mentioning straight away - it is in linux-next:

http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=include/video/mipi_display.h;h=ddcc8ca7316b51695bd827d9370d9027173e3576;hb=HEAD

Thanks
Guennadi

> otherwise, it creates generic parts of my dsim.h header file as mipi_display.h and
> use that header file?
> 
> Please, give me more detailed.
> 
> Thank you.
> 
> ------- Original Message -------
> Sender : Guennadi Liakhovetski<g.liakhovetski at gmx.de> 
> Date   : 2010-07-05 04:33 (GMT+09:00)
> Title  : Re: [PATCH v1 2/2] S5PV210: Add MIPI-DSI Driver.
> 
> On Sat, 3 Jul 2010, InKi Dae wrote:
> 
> > this patch addes MIPI-DSI Driver.
> > 
> > to use this driver, some structures below should be added to machine
> > specific file.
> > 
> > struct dsim_config
> > - define clock info, data lane count and video mode info for MIPI-DSI
> > Controller.
> > 
> > struct dsim_lcd_config
> > - define interface mode, channel ID, Pixel format and so on.
> > 
> > struct s5p_platform_dsim
> > - define callbacks for initializing D-PHY, MIPI reset and trigger
> > releated interfaces of s3c-fb.c file.
> > 
> > struct mipi_ddi_platform_data
> > - define following callbacks.
> > - a function for transferring and receiving command data to mipi based
> > lcd panel.
> > - a function for getting framedone status of mipi-dsi controller.
> > - a function for clearing framedone interrupt of mipi-dsi controller.
> > - a function for checking i80 framedone status of display controller.(fimd)
> > - a function for triggering to display controller.(fimd)
> > 
> > Signed-off-by: InKi Dae <inki.dae at samsung.com <mailto:p.osciak at samsung.com>>
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com
> > <mailto:kyungmin.park at samsung.com>>
> > ---
> > 
> > diff --git a/arch/arm/plat-samsung/include/plat/dsim.h b/arch/arm/plat-samsung/include/plat/dsim.h
> > new file mode 100644
> > index 0000000..49d8946
> > --- /dev/null
> > +++ b/arch/arm/plat-samsung/include/plat/dsim.h
> > @@ -0,0 +1,493 @@
> 
> [snip]
> 
> > +enum dsim_fifo_state {
> > +	DSIM_RX_DATA_FULL = (1 << 25),
> > +	DSIM_RX_DATA_EMPTY = (1 << 24),
> > +	SFR_HEADER_FULL = (1 << 23),
> > +	SFR_HEADER_EMPTY = (1 << 22),
> > +	SFR_PAYLOAD_FULL = (1 << 21),
> > +	SFR_PAYLOAD_EMPTY = (1 << 20),
> > +	I80_HEADER_FULL = (1 << 19),
> > +	I80_HEADER_EMPTY = (1 << 18),
> > +	I80_PALOAD_FULL = (1 << 17),
> > +	I80_PALOAD_EMPTY = (1 << 16),
> > +	SUB_DISP_HEADER_FULL = (1 << 15),
> > +	SUB_DISP_HEADER_EMPTY = (1 << 14),
> > +	SUB_DISP_PAYLOAD_FULL = (1 << 13),
> > +	SUB_DISP_PAYLOAD_EMPTY = (1 << 12),
> > +	MAIN_DISP_HEADER_FULL = (1 << 11),
> > +	MAIN_DISP_HEADER_EMPTY = (1 << 10),
> > +	MAIN_DISP_PAYLOAD_FULL = (1 << 9),
> > +	MAIN_DISP_PAYLOAD_EMPTY = (1 << 8),
> > +};
> 
> Please use include/video/mipi_display.h for these transaction types and, 
> possibly, for other generic MIPI DSI defines.
> 
> Thanks
> Guennadi
> ---
> Guennadi Liakhovetski, Ph.D.
> Freelance Open-Source Software Developer
> http://www.open-technology.de/
> 
> 
> 
> 

---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/