[PATCH 04/20] OMAP1: clock: some cleanup
Paul Walmsley
paul at pwsan.com
Fri Jul 2 11:29:17 EDT 2010
Convert most of the magic numbers in mach-omap1/clock_data.c to use
macros. Clean up a few comments to conform with Documentation/CodingStyle.
Mark the current clkops_uart as being OMAP16xx-only, and add some comments
to indicate that it does not belong there, for future cleanup.
This patch should not cause any functional changes.
Signed-off-by: Paul Walmsley <paul at pwsan.com>
---
arch/arm/mach-omap1/clock.c | 22 ++++--
arch/arm/mach-omap1/clock.h | 2 -
arch/arm/mach-omap1/clock_data.c | 129 ++++++++++++++++++++++++++++++--------
3 files changed, 116 insertions(+), 37 deletions(-)
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 6bbb1b8..b8c7fb9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -11,7 +11,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/errno.h>
@@ -34,9 +33,9 @@
__u32 arm_idlect1_mask;
struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
-/*-------------------------------------------------------------------------
+/*
* Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
+ */
unsigned long omap1_uart_recalc(struct clk *clk)
{
@@ -523,7 +522,8 @@ const struct clkops clkops_dspck = {
.disable = omap1_clk_disable_dsp_domain,
};
-static int omap1_clk_enable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static int omap1_clk_enable_uart_functional_16xx(struct clk *clk)
{
int ret;
struct uart_clk *uclk;
@@ -539,7 +539,8 @@ static int omap1_clk_enable_uart_functional(struct clk *clk)
return ret;
}
-static void omap1_clk_disable_uart_functional(struct clk *clk)
+/* XXX SYSC register handling does not belong in the clock framework */
+static void omap1_clk_disable_uart_functional_16xx(struct clk *clk)
{
struct uart_clk *uclk;
@@ -550,9 +551,10 @@ static void omap1_clk_disable_uart_functional(struct clk *clk)
omap1_clk_disable_generic(clk);
}
-const struct clkops clkops_uart = {
- .enable = omap1_clk_enable_uart_functional,
- .disable = omap1_clk_disable_uart_functional,
+/* XXX SYSC register handling does not belong in the clock framework */
+const struct clkops clkops_uart_16xx = {
+ .enable = omap1_clk_enable_uart_functional_16xx,
+ .disable = omap1_clk_disable_uart_functional_16xx,
};
long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
@@ -572,9 +574,9 @@ int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
return ret;
}
-/*-------------------------------------------------------------------------
+/*
* Omap1 clock reset and init functions
- *-------------------------------------------------------------------------*/
+ */
#ifdef CONFIG_OMAP_RESET_CLOCKS
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 75d0d7d..eaf09ef 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -107,7 +107,7 @@ extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
extern const struct clkops clkops_dspck;
extern const struct clkops clkops_dummy;
-extern const struct clkops clkops_uart;
+extern const struct clkops clkops_uart_16xx;
extern const struct clkops clkops_generic;
#endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index aa8558a..ca4bd86 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -8,6 +8,10 @@
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * To do:
+ * - Clocks that are only available on some chips should be marked with the
+ * chips that they are present on.
*/
#include <linux/kernel.h>
@@ -23,9 +27,49 @@
#include "clock.h"
-/*------------------------------------------------------------------------
+/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
+#define IDL_CLKOUT_ARM_SHIFT 12
+#define IDLTIM_ARM_SHIFT 9
+#define IDLAPI_ARM_SHIFT 8
+#define IDLIF_ARM_SHIFT 6
+#define IDLLB_ARM_SHIFT 4 /* undocumented? */
+#define OMAP1510_IDLLCD_ARM_SHIFT 3 /* undocumented? */
+#define IDLPER_ARM_SHIFT 2
+#define IDLXORP_ARM_SHIFT 1
+#define IDLWDT_ARM_SHIFT 0
+
+/* Some MOD_CONF_CTRL_0 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_UART3_CLK_MODE_R 31
+#define CONF_MOD_UART2_CLK_MODE_R 30
+#define CONF_MOD_UART1_CLK_MODE_R 29
+#define CONF_MOD_MMC_SD_CLK_REQ_R 23
+#define CONF_MOD_MCBSP3_AUXON 20
+
+/* Some MOD_CONF_CTRL_1 bit shifts - used in struct clk.enable_bit */
+#define CONF_MOD_SOSSI_CLK_EN_R 16
+
+/* Some OTG_SYSCON_2-specific bit fields */
+#define OTG_SYSCON_2_UHOST_EN_SHIFT 8
+
+/* Some SOFT_REQ_REG bit fields - used in struct clk.enable_bit */
+#define SOFT_MMC2_DPLL_REQ_SHIFT 13
+#define SOFT_MMC_DPLL_REQ_SHIFT 12
+#define SOFT_UART3_DPLL_REQ_SHIFT 11
+#define SOFT_UART2_DPLL_REQ_SHIFT 10
+#define SOFT_UART1_DPLL_REQ_SHIFT 9
+#define SOFT_USB_OTG_DPLL_REQ_SHIFT 8
+#define SOFT_CAM_DPLL_REQ_SHIFT 7
+#define SOFT_COM_MCKO_REQ_SHIFT 6
+#define SOFT_PERIPH_REQ_SHIFT 5 /* sys_ck gate for UART2 ? */
+#define USB_REQ_EN_SHIFT 4
+#define SOFT_USB_REQ_SHIFT 3 /* sys_ck gate for USB host? */
+#define SOFT_SDW_REQ_SHIFT 2 /* sys_ck gate for Bluetooth? */
+#define SOFT_COM_REQ_SHIFT 1 /* sys_ck gate for com proc? */
+#define SOFT_DPLL_REQ_SHIFT 0
+
+/*
* Omap1 clocks
- *-------------------------------------------------------------------------*/
+ */
static struct clk ck_ref = {
.name = "ck_ref",
@@ -54,7 +98,7 @@ static struct arm_idlect1_clk ck_dpll1out = {
.enable_bit = EN_CKOUT_ARM,
.recalc = &followparent_recalc,
},
- .idlect_shift = 12,
+ .idlect_shift = IDL_CLKOUT_ARM_SHIFT,
};
static struct clk sossi_ck = {
@@ -63,7 +107,7 @@ static struct clk sossi_ck = {
.parent = &ck_dpll1out.clk,
.flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
- .enable_bit = 16,
+ .enable_bit = CONF_MOD_SOSSI_CLK_EN_R,
.recalc = &omap1_sossi_recalc,
.set_rate = &omap1_set_sossi_rate,
};
@@ -91,7 +135,7 @@ static struct arm_idlect1_clk armper_ck = {
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
- .idlect_shift = 2,
+ .idlect_shift = IDLPER_ARM_SHIFT,
};
/*
@@ -118,7 +162,7 @@ static struct arm_idlect1_clk armxor_ck = {
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
},
- .idlect_shift = 1,
+ .idlect_shift = IDLXORP_ARM_SHIFT,
};
static struct arm_idlect1_clk armtim_ck = {
@@ -131,7 +175,7 @@ static struct arm_idlect1_clk armtim_ck = {
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
},
- .idlect_shift = 9,
+ .idlect_shift = IDLTIM_ARM_SHIFT,
};
static struct arm_idlect1_clk armwdt_ck = {
@@ -145,7 +189,7 @@ static struct arm_idlect1_clk armwdt_ck = {
.fixed_div = 14,
.recalc = &omap_fixed_divisor_recalc,
},
- .idlect_shift = 0,
+ .idlect_shift = IDLWDT_ARM_SHIFT,
};
static struct clk arminth_ck16xx = {
@@ -212,7 +256,6 @@ static struct clk dsptim_ck = {
.recalc = &followparent_recalc,
};
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
static struct arm_idlect1_clk tc_ck = {
.clk = {
.name = "tc_ck",
@@ -224,7 +267,7 @@ static struct arm_idlect1_clk tc_ck = {
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
- .idlect_shift = 6,
+ .idlect_shift = IDLIF_ARM_SHIFT,
};
static struct clk arminth_ck1510 = {
@@ -304,7 +347,7 @@ static struct arm_idlect1_clk api_ck = {
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
},
- .idlect_shift = 8,
+ .idlect_shift = IDLAPI_ARM_SHIFT,
};
static struct arm_idlect1_clk lb_ck = {
@@ -317,7 +360,7 @@ static struct arm_idlect1_clk lb_ck = {
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
},
- .idlect_shift = 4,
+ .idlect_shift = IDLLB_ARM_SHIFT,
};
static struct clk rhea1_ck = {
@@ -359,9 +402,15 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
.round_rate = omap1_clk_round_rate_ckctl_arm,
.set_rate = omap1_clk_set_rate_ckctl_arm,
},
- .idlect_shift = 3,
+ .idlect_shift = OMAP1510_IDLLCD_ARM_SHIFT,
};
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz. Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
static struct clk uart1_1510 = {
.name = "uart1_ck",
.ops = &clkops_null,
@@ -370,25 +419,37 @@ static struct clk uart1_1510 = {
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 29, /* Chooses between 12MHz and 48MHz */
+ .enable_bit = CONF_MOD_UART1_CLK_MODE_R,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz. Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
static struct uart_clk uart1_16xx = {
.clk = {
.name = "uart1_ck",
- .ops = &clkops_uart,
+ .ops = &clkops_uart_16xx,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 29,
+ .enable_bit = CONF_MOD_UART1_CLK_MODE_R,
},
.sysc_addr = 0xfffb0054,
};
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz. Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
static struct clk uart2_ck = {
.name = "uart2_ck",
.ops = &clkops_null,
@@ -397,11 +458,17 @@ static struct clk uart2_ck = {
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 30, /* Chooses between 12MHz and 48MHz */
+ .enable_bit = CONF_MOD_UART2_CLK_MODE_R,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz. Reimplement with clksel.
+ *
+ * XXX does this need SYSC register handling?
+ */
static struct clk uart3_1510 = {
.name = "uart3_ck",
.ops = &clkops_null,
@@ -410,21 +477,27 @@ static struct clk uart3_1510 = {
.rate = 12000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 31, /* Chooses between 12MHz and 48MHz */
+ .enable_bit = CONF_MOD_UART3_CLK_MODE_R,
.set_rate = &omap1_set_uart_rate,
.recalc = &omap1_uart_recalc,
};
+/*
+ * XXX The enable_bit here is misused - it simply switches between 12MHz
+ * and 48MHz. Reimplement with clksel.
+ *
+ * XXX SYSC register handling does not belong in the clock framework
+ */
static struct uart_clk uart3_16xx = {
.clk = {
.name = "uart3_ck",
- .ops = &clkops_uart,
+ .ops = &clkops_uart_16xx,
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 31,
+ .enable_bit = CONF_MOD_UART3_CLK_MODE_R,
},
.sysc_addr = 0xfffb9854,
};
@@ -457,7 +530,7 @@ static struct clk usb_hhc_ck16xx = {
/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
.flags = ENABLE_REG_32BIT,
.enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
- .enable_bit = 8 /* UHOST_EN */,
+ .enable_bit = OTG_SYSCON_2_UHOST_EN_SHIFT
};
static struct clk usb_dc_ck = {
@@ -466,7 +539,7 @@ static struct clk usb_dc_ck = {
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = 4,
+ .enable_bit = USB_REQ_EN_SHIFT,
};
static struct clk usb_dc_ck7xx = {
@@ -475,7 +548,7 @@ static struct clk usb_dc_ck7xx = {
/* Direct from ULPD, no parent */
.rate = 48000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = 8,
+ .enable_bit = SOFT_USB_OTG_DPLL_REQ_SHIFT,
};
static struct clk mclk_1510 = {
@@ -484,7 +557,7 @@ static struct clk mclk_1510 = {
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = 6,
+ .enable_bit = SOFT_COM_MCKO_REQ_SHIFT,
};
static struct clk mclk_16xx = {
@@ -524,9 +597,13 @@ static struct clk mmc1_ck = {
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
- .enable_bit = 23,
+ .enable_bit = CONF_MOD_MMC_SD_CLK_REQ_R,
};
+/*
+ * XXX MOD_CONF_CTRL_0 bit 20 is defined in the 1510 TRM as
+ * CONF_MOD_MCBSP3_AUXON ??
+ */
static struct clk mmc2_ck = {
.name = "mmc2_ck",
.ops = &clkops_generic,
@@ -546,7 +623,7 @@ static struct clk mmc3_ck = {
.rate = 48000000,
.flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
.enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
- .enable_bit = 12,
+ .enable_bit = SOFT_MMC_DPLL_REQ_SHIFT,
};
static struct clk virtual_ck_mpu = {
More information about the linux-arm-kernel
mailing list