[PATCH v3 06/12] s3c-fb: Add wait for VSYNC ioctl
Ben Dooks
ben at simtec.co.uk
Fri Jul 2 07:37:00 EDT 2010
On 28/06/10 09:08, Pawel Osciak wrote:
> Add VSYNC interrupt support and an ioctl that allows waiting for it.
> Interrupts are turned on only when needed.
>
> Signed-off-by: Pawel Osciak <p.osciak at samsung.com>
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> arch/arm/plat-samsung/include/plat/regs-fb.h | 1 +
> drivers/video/s3c-fb.c | 167 +++++++++++++++++++++++++-
> 2 files changed, 167 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/plat-samsung/include/plat/regs-fb.h b/arch/arm/plat-samsung/include/plat/regs-fb.h
> index f454e32..5bcdd09 100644
> --- a/arch/arm/plat-samsung/include/plat/regs-fb.h
> +++ b/arch/arm/plat-samsung/include/plat/regs-fb.h
> @@ -298,6 +298,7 @@
> #define VIDINTCON0_FRAMESEL0_FRONTPORCH (0x3 << 15)
>
> #define VIDINTCON0_FRAMESEL1 (1 << 13)
> +#define VIDINTCON0_FRAMESEL1_MASK (0x3 << 13)
> #define VIDINTCON0_FRAMESEL1_NONE (0x0 << 13)
> #define VIDINTCON0_FRAMESEL1_BACKPORCH (0x1 << 13)
> #define VIDINTCON0_FRAMESEL1_VSYNC (0x2 << 13)
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
> index 4f3680d..6131ebb 100644
> --- a/drivers/video/s3c-fb.c
> +++ b/drivers/video/s3c-fb.c
> @@ -21,6 +21,8 @@
> #include <linux/clk.h>
> #include <linux/fb.h>
> #include <linux/io.h>
> +#include <linux/uaccess.h>
> +#include <linux/interrupt.h>
>
> #include <mach/map.h>
> #include <plat/regs-fb-v4.h>
> @@ -48,6 +50,11 @@
> __raw_writel(v, r); } while(0)
> #endif /* FB_S3C_DEBUG_REGWRITE */
>
> +/* irq_flags bits */
> +#define S3C_FB_VSYNC_IRQ_EN 0
> +
> +#define VSYNC_TIMEOUT_MSEC 50
> +
> struct s3c_fb;
>
> #define VALID_BPP(x) (1 << ((x) - 1))
> @@ -156,6 +163,16 @@ struct s3c_fb_win {
> };
>
> /**
> + * struct s3c_fb_vsync - vsync information
> + * @wait: a queue for processes waiting for vsync
> + * @count: vsync interrupt count
> + */
> +struct s3c_fb_vsync {
> + wait_queue_head_t wait;
> + unsigned int count;
> +};
> +
> +/**
> * struct s3c_fb - overall hardware state of the hardware
> * @dev: The device that we bound to, for printing, etc.
> * @regs_res: The resource we claimed for the IO registers.
> @@ -165,6 +182,9 @@ struct s3c_fb_win {
> * @enabled: A bitmask of enabled hardware windows.
> * @pdata: The platform configuration data passed with the device.
> * @windows: The hardware windows that have been claimed.
> + * @irq_no: IRQ line number
> + * @irq_flags: irq flags
> + * @vsync_info: VSYNC-related information (count, queues...)
> */
> struct s3c_fb {
> struct device *dev;
> @@ -177,6 +197,10 @@ struct s3c_fb {
>
> struct s3c_fb_platdata *pdata;
> struct s3c_fb_win *windows[S3C_FB_MAX_WIN];
> +
> + int irq_no;
> + unsigned long irq_flags;
> + struct s3c_fb_vsync vsync_info;
> };
>
> /**
> @@ -801,6 +825,124 @@ static int s3c_fb_pan_display(struct fb_var_screeninfo *var,
> return 0;
> }
>
> +/**
> + * s3c_fb_enable_irq() - enable framebuffer interrupts
> + * @sfb: main hardware state
> + */
> +static void s3c_fb_enable_irq(struct s3c_fb *sfb)
> +{
> + void __iomem *regs = sfb->regs;
> + u32 irq_ctrl_reg;
> +
> + if (!test_and_set_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
> + /* IRQ disabled, enable it */
> + irq_ctrl_reg = readl(regs + VIDINTCON0);
> +
> + irq_ctrl_reg |= VIDINTCON0_INT_ENABLE;
> + irq_ctrl_reg |= VIDINTCON0_INT_FRAME;
> +
> + irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL0_MASK;
> + irq_ctrl_reg |= VIDINTCON0_FRAMESEL0_VSYNC;
> + irq_ctrl_reg &= ~VIDINTCON0_FRAMESEL1_MASK;
> + irq_ctrl_reg |= VIDINTCON0_FRAMESEL1_NONE;
> +
> + writel(irq_ctrl_reg, regs + VIDINTCON0);
> + }
> +}
there should probably be some form of locking so that an irq
doesn't come through and disable this. possibly in the call
that queues the request to reduce the likelyhood of any races.
> +
> +/**
> + * s3c_fb_disable_irq() - disable framebuffer interrupts
> + * @sfb: main hardware state
> + */
> +static void s3c_fb_disable_irq(struct s3c_fb *sfb)
> +{
> + void __iomem *regs = sfb->regs;
> + u32 irq_ctrl_reg;
> +
> + if (test_and_clear_bit(S3C_FB_VSYNC_IRQ_EN, &sfb->irq_flags)) {
> + /* IRQ enabled, disable it */
> + irq_ctrl_reg = readl(regs + VIDINTCON0);
> +
> + irq_ctrl_reg &= ~VIDINTCON0_INT_FRAME;
> + irq_ctrl_reg &= ~VIDINTCON0_INT_ENABLE;
> +
> + writel(irq_ctrl_reg, regs + VIDINTCON0);
> + }
> +}
> +
> +static irqreturn_t s3c_fb_irq(int irq, void *dev_id)
> +{
> + struct s3c_fb *sfb = dev_id;
> + void __iomem *regs = sfb->regs;
> + u32 irq_sts_reg;
> +
> + irq_sts_reg = readl(regs + VIDINTCON1);
> +
> + if (irq_sts_reg & VIDINTCON1_INT_FRAME) {
> +
> + /* VSYNC interrupt, accept it */
> + writel(VIDINTCON1_INT_FRAME, regs + VIDINTCON1);
> +
> + sfb->vsync_info.count++;
> + wake_up_interruptible(&sfb->vsync_info.wait);
> + }
> +
> + /* We only support waiting for VSYNC for now, so it's safe
> + * to always disable irqs here.
> + */
> + s3c_fb_disable_irq(sfb);
> +
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * s3c_fb_wait_for_vsync() - sleep until next VSYNC interrupt or timeout
> + * @sfb: main hardware state
> + * @crtc: head index.
> + */
> +static int s3c_fb_wait_for_vsync(struct s3c_fb *sfb, u32 crtc)
> +{
> + unsigned long count;
> + int ret;
> +
> + if (crtc != 0)
> + return -ENODEV;
> +
> + s3c_fb_enable_irq(sfb);
> + count = sfb->vsync_info.count;
possibly doing count before enabling the irq.
> + ret = wait_event_interruptible_timeout(sfb->vsync_info.wait,
> + count != sfb->vsync_info.count,
> + msecs_to_jiffies(VSYNC_TIMEOUT_MSEC));
> + if (ret == 0)
> + return -ETIMEDOUT;
> +
> + return 0;
> +}
> +
> +static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
> + unsigned long arg)
> +{
> + struct s3c_fb_win *win = info->par;
> + struct s3c_fb *sfb = win->parent;
> + int ret;
> + u32 crtc;
> +
> + switch (cmd) {
> + case FBIO_WAITFORVSYNC:
> + if (get_user(crtc, (u32 __user *)arg)) {
> + ret = -EFAULT;
> + break;
> + }
can't find any info on what the argument is meant to be.
> +
> + ret = s3c_fb_wait_for_vsync(sfb, crtc);
> + break;
> + default:
> + ret = -ENOTTY;
Can someone else confirm this is the correct err?
> + }
> +
> + return ret;
> +}
> +
> static struct fb_ops s3c_fb_ops = {
> .owner = THIS_MODULE,
> .fb_check_var = s3c_fb_check_var,
> @@ -811,6 +953,7 @@ static struct fb_ops s3c_fb_ops = {
> .fb_copyarea = cfb_copyarea,
> .fb_imageblit = cfb_imageblit,
> .fb_pan_display = s3c_fb_pan_display,
> + .fb_ioctl = s3c_fb_ioctl,
> };
>
> /**
> @@ -917,6 +1060,8 @@ static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
>
> dev_dbg(sfb->dev, "probing window %d, variant %p\n", win_no, variant);
>
> + init_waitqueue_head(&sfb->vsync_info.wait);
> +
> palette_size = variant->palette_sz * 4;
>
> fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
> @@ -1096,6 +1241,20 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
> goto err_req_region;
> }
>
> + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
> + if (!res) {
> + dev_err(dev, "failed to acquire irq resource\n");
> + ret = -ENOENT;
> + goto err_ioremap;
> + }
> + sfb->irq_no = res->start;
> + ret = request_irq(sfb->irq_no, s3c_fb_irq,
> + 0, "s3c_fb", sfb);
> + if (ret) {
> + dev_err(dev, "irq request failed\n");
> + goto err_ioremap;
> + }
> +
> dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
>
> /* setup gpio and output polarity controls */
> @@ -1130,7 +1289,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
> dev_err(dev, "failed to create window %d\n", win);
> for (; win >= 0; win--)
> s3c_fb_release_win(sfb, sfb->windows[win]);
> - goto err_ioremap;
> + goto err_irq;
> }
> }
>
> @@ -1138,6 +1297,9 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
>
> return 0;
>
> +err_irq:
> + free_irq(sfb->irq_no, sfb);
> +
> err_ioremap:
> iounmap(sfb->regs);
>
> @@ -1170,6 +1332,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
> if (sfb->windows[win])
> s3c_fb_release_win(sfb, sfb->windows[win]);
>
> + free_irq(sfb->irq_no, sfb);
> +
> iounmap(sfb->regs);
>
> clk_disable(sfb->bus_clk);
> @@ -1370,6 +1534,7 @@ static struct s3c_fb_driverdata s3c_fb_data_s5pv210 __devinitdata = {
> [3] = 0x3000,
> [4] = 0x3400,
> },
> +
> },
oops, added whitespace.
> .win[0] = &s3c_fb_data_64xx_wins[0],
> .win[1] = &s3c_fb_data_64xx_wins[1],
More information about the linux-arm-kernel
mailing list