[PATCH 2/3] arm: return both physical and virtual addresses from addruart
Jeremy Kerr
jeremy.kerr at canonical.com
Tue Aug 31 21:07:50 EDT 2010
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.
This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.
Updated with fixes for OMAP from Jason Wang <jason77.wang at gmail.com>
and Tony Lindgren <tony at atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>.
Signed-off-by: Jeremy Kerr <jeremy.kerr at canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
Signed-off-by: Jason Wang <jason77.wang at gmail.com>
Signed-off-by: Tony Lindgren <tony at atomide.com>
Tested-by: Kevin Hilman <khilman at deeprootsystems.com>
---
arch/arm/kernel/debug.S | 22 +-
arch/arm/mach-aaec2000/include/mach/debug-macro.S | 10
arch/arm/mach-at91/include/mach/debug-macro.S | 8
arch/arm/mach-clps711x/include/mach/debug-macro.S | 12 -
arch/arm/mach-cns3xxx/include/mach/debug-macro.S | 10
arch/arm/mach-davinci/include/mach/debug-macro.S | 46 ++--
arch/arm/mach-dove/include/mach/debug-macro.S | 11 -
arch/arm/mach-ebsa110/include/mach/debug-macro.S | 7
arch/arm/mach-ep93xx/include/mach/debug-macro.S | 11 -
arch/arm/mach-footbridge/include/mach/debug-macro.S | 22 --
arch/arm/mach-gemini/include/mach/debug-macro.S | 8
arch/arm/mach-h720x/include/mach/debug-macro.S | 10
arch/arm/mach-integrator/include/mach/debug-macro.S | 10
arch/arm/mach-iop13xx/include/mach/debug-macro.S | 16 -
arch/arm/mach-iop32x/include/mach/debug-macro.S | 7
arch/arm/mach-iop33x/include/mach/debug-macro.S | 12 -
arch/arm/mach-ixp2000/include/mach/debug-macro.S | 14 -
arch/arm/mach-ixp23xx/include/mach/debug-macro.S | 11 -
arch/arm/mach-ixp4xx/include/mach/debug-macro.S | 16 -
arch/arm/mach-kirkwood/include/mach/debug-macro.S | 11 -
arch/arm/mach-ks8695/include/mach/debug-macro.S | 8
arch/arm/mach-l7200/include/mach/debug-macro.S | 38 +++
arch/arm/mach-lh7a40x/include/mach/debug-macro.S | 10
arch/arm/mach-loki/include/mach/debug-macro.S | 11 -
arch/arm/mach-mmp/include/mach/debug-macro.S | 11 -
arch/arm/mach-msm/include/mach/debug-macro.S | 10
arch/arm/mach-mv78xx0/include/mach/debug-macro.S | 11 -
arch/arm/mach-netx/include/mach/debug-macro.S | 10
arch/arm/mach-nomadik/include/mach/debug-macro.S | 12 -
arch/arm/mach-ns9xxx/include/mach/debug-macro.S | 8
arch/arm/mach-omap1/include/mach/debug-macro.S | 68 +++---
arch/arm/mach-omap2/include/mach/debug-macro.S | 127 +++++-------
arch/arm/mach-orion5x/include/mach/debug-macro.S | 11 -
arch/arm/mach-pnx4008/include/mach/debug-macro.S | 10
arch/arm/mach-pxa/include/mach/debug-macro.S | 10
arch/arm/mach-realview/include/mach/debug-macro.S | 10
arch/arm/mach-rpc/include/mach/debug-macro.S | 12 -
arch/arm/mach-s3c2410/include/mach/debug-macro.S | 11 -
arch/arm/mach-s3c24a0/include/mach/debug-macro.S | 11 -
arch/arm/mach-s3c64xx/include/mach/debug-macro.S | 11 -
arch/arm/mach-s5p6440/include/mach/debug-macro.S | 11 -
arch/arm/mach-s5p6442/include/mach/debug-macro.S | 11 -
arch/arm/mach-s5pc100/include/mach/debug-macro.S | 11 -
arch/arm/mach-s5pv210/include/mach/debug-macro.S | 11 -
arch/arm/mach-sa1100/include/mach/debug-macro.S | 36 +--
arch/arm/mach-shark/include/mach/debug-macro.S | 7
arch/arm/mach-tegra/include/mach/debug-macro.S | 26 +-
arch/arm/mach-u300/include/mach/debug-macro.S | 11 -
arch/arm/mach-ux500/include/mach/debug-macro.S | 8
arch/arm/mach-versatile/include/mach/debug-macro.S | 12 -
arch/arm/mach-vexpress/include/mach/debug-macro.S | 10
arch/arm/plat-mxc/include/mach/debug-macro.S | 8
arch/arm/plat-spear/include/plat/debug-macro.S | 8
arch/arm/plat-stmp3xxx/include/mach/debug-macro.S | 11 -
54 files changed, 432 insertions(+), 433 deletions(-)
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index f913952..a0f0752 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
.endm
#if defined(CONFIG_CPU_V6)
@@ -121,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0
#include <mach/debug-macro.S>
#endif /* CONFIG_DEBUG_ICEDCC */
+#ifdef CONFIG_MMU
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \tmp1, \tmp2
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ moveq \rx, \tmp1
+ movne \rx, \tmp2
+ .endm
+
+#else /* !CONFIG_MMU */
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \rx, \tmp1
+ .endm
+
+#endif /* CONFIG_MMU */
+
/*
* Useful debugging routines
*/
@@ -155,7 +171,7 @@ ENDPROC(printhex2)
.ltorg
ENTRY(printascii)
- addruart r3, r1
+ addruart_current r3, r1, r2
b 2f
1: waituart r2, r3
senduart r1, r3
@@ -171,7 +187,7 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
- addruart r3, r1
+ addruart_current r3, r1, r2
mov r1, r0
mov r0, #0
b 1b
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
index a9cac36..bc7ad55 100644
--- a/arch/arm/mach-aaec2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
*/
#include "hardware.h"
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x80000000 @ physical
- movne \rx, #io_p2v(0x80000000) @ virtual
- orr \rx, \rx, #0x00000800
+ .macro addruart, rp, rv
+ mov \rp, 0x00000800
+ orr \rv, \rp, #io_p2v(0x80000000) @ virtual
+ orr \rp, \rp, #0x80000000 @ physical
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index 9e750a1..0f959fa 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
- ldrne \rx, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
+ .macro addruart, rp, rv
+ ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
+ ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 072cc6b..507c687 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,16 +14,14 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #CLPS7111_PHYS_BASE
- movne \rx, #CLPS7111_VIRT_BASE
+ .macro addruart, rp, rv
#ifndef CONFIG_DEBUG_CLPS711X_UART2
- add \rx, \rx, #0x0000 @ UART1
+ mov \rp, #0x0000 @ UART1
#else
- add \rx, \rx, #0x1000 @ UART2
+ mov \rp, #0x1000 @ UART2
#endif
+ orr \rv, \rp, #CLPS7111_VIRT_BASE
+ orr \rp, \rp, #CLPS7111_PHYS_BASE
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index d16ce7e..56d8286 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,12 +10,10 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xf0000000 @ virtual base
- orr \rx, \rx, #0x00009000
+ .macro addruart,rp,rv
+ mov \rp, #0x00009000
+ orr \rv, \rp, #0xf0000000 @ virtual base
+ orr \rp, \rp, #0x10000000
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f761dfd..9f1befc 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -29,35 +29,39 @@ davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
/* Use davinci_uart_phys/virt if already configured */
-10: mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =__virt_to_phys(davinci_uart_phys)
- ldrne \rx, =davinci_uart_virt
- ldr \rx, [\rx]
- cmp \rx, #0 @ is port configured?
+10: mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =__virt_to_phys(davinci_uart_phys)
+ ldrne \rp, =davinci_uart_phys
+ add \rv, \rp, #4 @ davinci_uart_virt
+ ldr \rp, [\rp, #0]
+ ldr \rv, [\rv, #0]
+ cmp \rp, #0 @ is port configured?
+ cmpne \rv, #0
bne 99f @ already configured
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
+ /* Check the debug UART address set in uncompress.h */
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
/* Copy uart phys address from decompressor uart info */
- ldreq \tmp, =__virt_to_phys(davinci_uart_phys)
- ldrne \tmp, =davinci_uart_phys
- ldreq \rx, =DAVINCI_UART_INFO
- ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO)
- ldr \rx, [\rx, #0]
- str \rx, [\tmp]
+ ldreq \rv, =__virt_to_phys(davinci_uart_phys)
+ ldrne \rv, =davinci_uart_phys
+ ldreq \rp, =DAVINCI_UART_INFO
+ ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldr \rp, [\rp, #0]
+ str \rp, [\rv]
/* Copy uart virt address from decompressor uart info */
- ldreq \tmp, =__virt_to_phys(davinci_uart_virt)
- ldrne \tmp, =davinci_uart_virt
- ldreq \rx, =DAVINCI_UART_INFO
- ldrne \rx, =__phys_to_virt(DAVINCI_UART_INFO)
- ldr \rx, [\rx, #4]
- str \rx, [\tmp]
+ ldreq \rv, =__virt_to_phys(davinci_uart_virt)
+ ldrne \rv, =davinci_uart_virt
+ ldreq \rp, =DAVINCI_UART_INFO
+ ldrne \rp, =__phys_to_virt(DAVINCI_UART_INFO)
+ ldr \rp, [\rp, #4]
+ str \rp, [\rv]
b 10b
99:
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index 1521d13..da8bf2b 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
#include <mach/bridge-regs.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
- ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
+ .macro addruart, rp, rv
+ ldr \rp, =DOVE_SB_REGS_PHYS_BASE
+ ldr \rv, =DOVE_SB_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index ebbd89f..7ef5690 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
*
**/
- .macro addruart, rx, tmp
- mov \rx, #0xf0000000
- orr \rx, \rx, #0x00000be0
+ .macro addruart, rp, rv
+ mov \rp, #0xf0000000
+ orr \rp, \rp, #0x00000be0
+ mov \rp, \rv
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index 5cd2244..b25bc90 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =EP93XX_APB_PHYS_BASE @ Physical base
- ldrne \rx, =EP93XX_APB_VIRT_BASE @ virtual base
- orr \rx, \rx, #0x000c0000
+ .macro addruart, rp, rv
+ ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
+ ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
+ orr \rp, \rp, #0x000c0000
+ orr \rv, \rv, #0x000c0000
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 60dda13..3c9e0c4 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,12 +15,10 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x7c000000 @ physical
- movne \rx, #0xff000000 @ virtual
- orr \rx, \rx, #0x000003f8
+ .macro addruart, rp, rv
+ mov \rp, #0x000003f8
+ orr \rv, \rp, #0x7c000000 @ physical
+ orr \rp, \rp, #0xff000000 @ virtual
.endm
#define UART_SHIFT 0
@@ -32,14 +30,14 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x42000000
- movne \rx, #dc21285_high
+ .macro addruart, rp, rv
.if dc21285_low
- orrne \rx, \rx, #dc21285_low
+ mov \rp, #dc21285_low
+ .else
+ mov \rp, #0
.endif
+ orr \rv, \rp, #0x42000000
+ orr \rp, \rp, #dc21285_high
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index ad47704..f40e006 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,11 +11,9 @@
*/
#include <mach/hardware.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =GEMINI_UART_BASE @ physical
- ldrne \rx, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
+ .macro addruart, rp, rv
+ ldr \rp, =GEMINI_UART_BASE @ physical
+ ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index 27cafd1..c2093e8 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,12 +16,10 @@
.equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #io_phys @ physical base address
- movne \rx, #io_virt @ virtual address
- add \rx, \rx, #0x00020000 @ UART1
+ .macro addruart, rp, rv
+ mov \rp, #0x00020000 @ UART1
+ add \rv, \rp, #io_virt @ virtual address
+ add \rp, \rp, #io_phys @ physical base address
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index 87a6888..a1f598f 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x16000000 @ physical base address
- movne \rx, #0xf0000000 @ virtual base
- addne \rx, \rx, #0x16000000 >> 4
+ .macro addruart, rp, rv
+ mov \rp, #0x16000000 @ physical base address
+ mov \rv, #0xf0000000 @ virtual base
+ add \rv, \rv, #0x16000000 >> 4
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index c9d6ba4..e664466 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,15 +11,13 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- moveq \rx, #0xff000000 @ physical
- orreq \rx, \rx, #0x00d80000
- movne \rx, #0xfe000000 @ virtual
- orrne \rx, \rx, #0x00e80000
- orr \rx, \rx, #0x00002300
- orr \rx, \rx, #0x00000040
+ .macro addruart, rp, rv
+ mov \rp, #0x00002300
+ orr \rp, \rp, #0x00000040
+ orr \rv, \rp, #0xfe000000 @ virtual
+ orr \rv, \rv, #0x00e80000
+ orr \rp, \rp, #0xff000000 @ physical
+ orr \rp, \rp, #0x00d80000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index 736afe1..ff9e76c 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx, tmp
- mov \rx, #0xfe000000 @ physical as well as virtual
- orr \rx, \rx, #0x00800000 @ location of the UART
+ .macro addruart, rp, rv
+ mov \rp, #0xfe000000 @ physical as well as virtual
+ orr \rp, \rp, #0x00800000 @ location of the UART
+ mov \rv, \rp
.endm
#define UART_SHIFT 0
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index addb2da..40c500d 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- moveq \rx, #0xff000000 @ physical
- movne \rx, #0xfe000000 @ virtual
- orr \rx, \rx, #0x00ff0000
- orr \rx, \rx, #0x0000f700
+ .macro addruart, rp, rv
+ mov \rp, #0x00ff0000
+ orr \rp, \rp, #0x0000f700
+ orr \rv, #0xfe000000 @ virtual
+ orr \rp, #0xff000000 @ physical
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 6a82768..0ef533b 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,16 +11,14 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xc0000000 @ Physical base
- movne \rx, #0xfe000000 @ virtual base
- orrne \rx, \rx, #0x00f00000
- orr \rx, \rx, #0x00030000
+ .macro addruart, rp, rv
+ mov \rp, #0x00030000
#ifdef __ARMEB__
- orr \rx, \rx, #0x00000003
+ orr \rp, \rp, #0x00000003
#endif
+ orr \rv, \rp, #0xfe000000 @ virtual base
+ orr \rv, \rv, #0x00f00000
+ orr \rp, \rp, #0xc0000000 @ Physical base
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index a82e375..f7c6eef 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,13 +12,12 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ mmu enabled?
- ldreq \rx, =IXP23XX_PERIPHERAL_PHYS @ physical
- ldrne \rx, =IXP23XX_PERIPHERAL_VIRT @ virtual
+ .macro addruart, rp, rv
+ ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
+ ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
- orr \rx, \rx, #0x00000003
+ orr \rp, \rp, #0x00000003
+ orr \rv, \rv, #0x00000003
#endif
.endm
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index 3fc66d6..b974a49 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,16 +10,16 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0xc8000000
- movne \rx, #0xff000000
- orrne \rx, \rx, #0x00b00000
+ .macro addruart, rp, rv
#ifdef __ARMEB__
- add \rx,\rx,#3 @ Uart regs are at off set of 3 if
- @ byte writes used - Big Endian.
+ mov \rp, #3 @ Uart regs are at off set of 3 if
+ @ byte writes used - Big Endian.
+#else
+ mov \rp, #0
#endif
+ orr \rv, \rp, #0xff000000 @ virtual
+ orr \rv, \rv, #0x00b00000
+ orr \rp, \rp, #0xc8000000 @ physical
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index d060677..db06ae4 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
#include <mach/bridge-regs.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =KIRKWOOD_REGS_PHYS_BASE
- ldrne \rx, =KIRKWOOD_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
+ .macro addruart, rp, rv
+ ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
+ ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index cf2095d..bf516ad 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,11 +14,9 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =KS8695_UART_PA @ physical base address
- ldrne \rx, =KS8695_UART_VA @ virtual base address
+ .macro addruart, rp, rv
+ ldr \rp, =KS8695_UART_PA @ physical base address
+ ldr \rv, =KS8695_UART_VA @ virtual base address
.endm
.macro senduart, rd, rx
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 0000000..b0a2db7
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .equ io_virt, IO_BASE
+ .equ io_phys, IO_START
+
+ .macro addruart, rp, rv
+ mov \rp, #0x00044000 @ UART1
+@ mov \rp, #0x00045000 @ UART2
+ add \rv, \rp, #io_virt @ virtual address
+ add \rp, \rp, #io_phys @ physical base address
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x0] @ UARTDR
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 5 @ UARTFLGUTXFF - 1 when full
+ bne 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x18] @ UARTFLG
+ tst \rd, #1 << 3 @ UARTFLGUBUSY - 1 when busy
+ bne 1001b
+ .endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
index c0dcbbb..cff3362 100644
--- a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -14,12 +14,10 @@
@ It is not known if this will be appropriate for every 40x
@ board.
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- mov \rx, #0x00000700 @ offset from base
- orreq \rx, \rx, #0x80000000 @ physical base
- orrne \rx, \rx, #0xf8000000 @ virtual base
+ .macro addruart, rp, rv
+ mov \rp, #0x00000700 @ offset from base
+ orr \rv, \rp, #0xf8000000 @ virtual base
+ orr \rp, \rp, #0x80000000 @ physical base
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
index 3136c91..cc90d99 100644
--- a/arch/arm/mach-loki/include/mach/debug-macro.S
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
#include <mach/loki.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =LOKI_REGS_PHYS_BASE
- ldrne \rx, =LOKI_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
+ .macro addruart, rp, rv
+ ldr \rp, =LOKI_REGS_PHYS_BASE
+ ldr \rv, =LOKI_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 76deff2..7e2ebd3 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,12 +11,11 @@
#include <mach/addr-map.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =APB_PHYS_BASE @ physical
- ldrne \rx, =APB_VIRT_BASE @ virtual
- orr \rx, \rx, #0x00017000
+ .macro addruart, rp, rv
+ ldr \rp, =APB_PHYS_BASE @ physical
+ ldr \rv, =APB_VIRT_BASE @ virtual
+ orr \rp, \rp, #0x00017000
+ orr \rv, \rv, #0x00017000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 528750f..3c35b0d 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,12 +20,10 @@
#include <mach/msm_iomap.h>
#ifdef CONFIG_MSM_DEBUG_UART
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
@ see if the MMU is enabled and select appropriate base address
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, =MSM_DEBUG_UART_PHYS
- ldrne \rx, =MSM_DEBUG_UART_BASE
+ ldr \rp, =MSM_DEBUG_UART_PHYS
+ ldr \rv, =MSM_DEBUG_UART_BASE
.endm
.macro senduart,rd,rx
@@ -40,7 +38,7 @@
beq 1001b
.endm
#else
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index cd81689..0489142 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,12 +8,11 @@
#include <mach/mv78xx0.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =MV78XX0_REGS_PHYS_BASE
- ldrne \rx, =MV78XX0_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
+ .macro addruart, rp, rv
+ ldr \rp, =MV78XX0_REGS_PHYS_BASE
+ ldr \rv, =MV78XX0_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index e96339e..56a9152 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
#include "hardware.h"
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00100000 @ physical
- movne \rx, #io_p2v(0x00100000) @ virtual
- orr \rx, \rx, #0x00000a00
+ .macro addruart, rp, rv
+ mov \rp, #0x00000a00
+ orr \rv, \rp, #io_p2v(0x00100000) @ virtual
+ orr \rp, \rp, #0x00100000 @ physical
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index 4f92acf..e7151b4 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,13 +10,11 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000 @ physical base address
- movne \rx, #0xf0000000 @ virtual base
- add \rx, \rx, #0x00100000
- add \rx, \rx, #0x000fb000
+ .macro addruart, rp, rv
+ mov \rp, #0x00100000
+ add \rp, \rp, #0x000fb000
+ add \rv, \rp, #0xf0000000 @ virtual base
+ add \rp, \rp, #0x10000000 @ physical base address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
index 5c934bd..5a2acbd 100644
--- a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -12,11 +12,9 @@
#include <mach/regs-board-a9m9750dev.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, =NS9XXX_CSxSTAT_PHYS(0)
- ldrne \rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+ .macro addruart, rp, rv
+ ldr \rp, =NS9XXX_CSxSTAT_PHYS(0)
+ ldr \rv, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 671408e..6a0fa04 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -28,56 +28,58 @@ omap_uart_virt: .word 0x0
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
/* Use omap_uart_phys/virt if already configured */
-9: mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
- ldrne \rx, =omap_uart_virt @ virtual base
- ldr \rx, [\rx, #0]
- cmp \rx, #0 @ is port configured?
+9: mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rp, =omap_uart_phys @ MMU enabled
+ add \rv, \rp, #4 @ omap_uart_virt
+ ldr \rp, [\rp, #0]
+ ldr \rv, [\rv, #0]
+ cmp \rp, #0 @ is port configured?
+ cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =OMAP_UART_INFO
- ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
- ldr \rx, [\rx, #0]
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
+ ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
+ ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
-10: cmp \rx, #0 @ no port configured?
+10: cmp \rp, #0 @ no port configured?
beq 11f @ if none, try to use UART1
- cmp \rx, #OMAP1UART1
+ cmp \rp, #OMAP1UART1
beq 11f @ configure OMAP1UART1
- cmp \rx, #OMAP1UART2
+ cmp \rp, #OMAP1UART2
beq 12f @ configure OMAP1UART2
- cmp \rx, #OMAP1UART3
+ cmp \rp, #OMAP1UART3
beq 13f @ configure OMAP2UART3
/* Configure the UART offset from the phys/virt base */
-11: mov \rx, #0x00fb0000 @ OMAP1UART1
+11: mov \rp, #0x00fb0000 @ OMAP1UART1
b 98f
-12: mov \rx, #0x00fb0000 @ OMAP1UART1
- orr \rx, \rx, #0x00000800 @ OMAP1UART2
+12: mov \rp, #0x00fb0000 @ OMAP1UART1
+ orr \rp, \rp, #0x00000800 @ OMAP1UART2
b 98f
-13: mov \rx, #0x00fb0000 @ OMAP1UART1
- orr \rx, \rx, #0x00000800 @ OMAP1UART2
- orr \rx, \rx, #0x00009000 @ OMAP1UART3
+13: mov \rp, #0x00fb0000 @ OMAP1UART1
+ orr \rp, \rp, #0x00000800 @ OMAP1UART2
+ orr \rp, \rp, #0x00009000 @ OMAP1UART3
/* Store both phys and virt address for the uart */
-98: add \rx, \rx, #0xff000000 @ phys base
- mrc p15, 0, \tmp, c1, c0
- tst \tmp, #1 @ MMU enabled?
- ldreq \tmp, =__virt_to_phys(omap_uart_phys)
- ldrne \tmp, =omap_uart_phys
- str \rx, [\tmp, #0]
- sub \rx, \rx, #0xff000000 @ phys base
- add \rx, \rx, #0xfe000000 @ virt base
- ldreq \tmp, =__virt_to_phys(omap_uart_virt)
- ldrne \tmp, =omap_uart_virt
- str \rx, [\tmp, #0]
+98: add \rp, \rp, #0xff000000 @ phys base
+ mrc p15, 0, \rv, c1, c0
+ tst \rv, #1 @ MMU enabled?
+ ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rv, =omap_uart_phys @ MMU enabled
+ str \rp, [\rv, #0]
+ sub \rp, \rp, #0xff000000 @ phys base
+ add \rp, \rp, #0xfe000000 @ virt base
+ add \rv, \rv, #4 @ omap_uart_lsr
+ str \rp, [\rv, #0]
b 9b
99:
.endm
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 09331bb..6a4d413 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -31,95 +31,94 @@ omap_uart_lsr: .word 0
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
/* Use omap_uart_phys/virt if already configured */
-10: mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =__virt_to_phys(omap_uart_phys) @ physical base address
- ldrne \rx, =omap_uart_virt @ virtual base address
- ldr \rx, [\rx, #0]
- cmp \rx, #0 @ is port configured?
+10: mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rp, =omap_uart_phys @ MMU enabled
+ add \rv, \rp, #4 @ omap_uart_virt
+ ldr \rp, [\rp, #0]
+ ldr \rv, [\rv, #0]
+ cmp \rp, #0 @ is port configured?
+ cmpne \rv, #0
bne 99f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =OMAP_UART_INFO
- ldrne \rx, =__phys_to_virt(OMAP_UART_INFO)
- ldr \rx, [\rx, #0]
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
+ ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
+ ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
- cmp \rx, #0 @ no port configured?
+ cmp \rp, #0 @ no port configured?
beq 21f @ if none, try to use UART1
- cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
+ cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1
beq 21f @ configure OMAP2/3/4UART1
- cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
+ cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2
beq 22f @ configure OMAP2/3/4UART2
- cmp \rx, #OMAP2UART3 @ only on 24xx
+ cmp \rp, #OMAP2UART3 @ only on 24xx
beq 23f @ configure OMAP2UART3
- cmp \rx, #OMAP3UART3 @ only on 34xx
+ cmp \rp, #OMAP3UART3 @ only on 34xx
beq 33f @ configure OMAP3UART3
- cmp \rx, #OMAP4UART3 @ only on 44xx
+ cmp \rp, #OMAP4UART3 @ only on 44xx
beq 43f @ configure OMAP4UART3
- cmp \rx, #OMAP3UART4 @ only on 36xx
+ cmp \rp, #OMAP3UART4 @ only on 36xx
beq 34f @ configure OMAP3UART4
- cmp \rx, #OMAP4UART4 @ only on 44xx
+ cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
- cmp \rx, #ZOOM_UART @ only on zoom2/3
+ cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
/* Configure the UART offset from the phys/virt base */
-21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
+21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
b 98f
-22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
+22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
b 98f
-23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
+23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE)
b 98f
-33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
- add \rx, \rx, #0x00fb0000
- add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
+33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rp, \rp, #0x00fb0000
+ add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE
b 98f
-34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
- add \rx, \rx, #0x00fb0000
- add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
+34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rp, \rp, #0x00fb0000
+ add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE
b 98f
-43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
+43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE)
b 98f
-44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
+44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
-95: ldr \rx, =ZOOM_UART_BASE
- mrc p15, 0, \tmp, c1, c0
- tst \tmp, #1 @ MMU enabled?
- ldreq \tmp, =__virt_to_phys(omap_uart_phys)
- ldrne \tmp, =omap_uart_phys
- str \rx, [\tmp, #0]
- ldr \rx, =ZOOM_UART_VIRT
- ldreq \tmp, =__virt_to_phys(omap_uart_virt)
- ldrne \tmp, =omap_uart_virt
- str \rx, [\tmp, #0]
- mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
- ldreq \tmp, =__virt_to_phys(omap_uart_lsr)
- ldrne \tmp, =omap_uart_lsr
- str \rx, [\tmp, #0]
+95: ldr \rp, =ZOOM_UART_BASE
+ mrc p15, 0, \rv, c1, c0
+ tst \rv, #1 @ MMU enabled?
+ ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rv, =omap_uart_phys @ MMU enabled
+ str \rp, [\rv, #0]
+ ldr \rp, =ZOOM_UART_VIRT
+ add \rv, \rv, #4 @ omap_uart_virt
+ str \rp, [\rv, #0]
+ mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+ add \rv, \rv, #4 @ omap_uart_lsr
+ str \rp, [\rv, #0]
b 10b
/* Store both phys and virt address for the uart */
-98: add \rx, \rx, #0x48000000 @ phys base
- mrc p15, 0, \tmp, c1, c0
- tst \tmp, #1 @ MMU enabled?
- ldreq \tmp, =__virt_to_phys(omap_uart_phys)
- ldrne \tmp, =omap_uart_phys
- str \rx, [\tmp, #0]
- sub \rx, \rx, #0x48000000 @ phys base
- add \rx, \rx, #0xfa000000 @ virt base
- ldreq \tmp, =__virt_to_phys(omap_uart_virt)
- ldrne \tmp, =omap_uart_virt
- str \rx, [\tmp, #0]
- mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
- ldreq \tmp, =__virt_to_phys(omap_uart_lsr)
- ldrne \tmp, =omap_uart_lsr
- str \rx, [\tmp, #0]
+98: add \rp, \rp, #0x48000000 @ phys base
+ mrc p15, 0, \rv, c1, c0
+ tst \rv, #1 @ MMU enabled?
+ ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldrne \rv, =omap_uart_phys @ MMU enabled
+ str \rp, [\rv, #0]
+ sub \rp, \rp, #0x48000000 @ phys base
+ add \rp, \rp, #0xfa000000 @ virt base
+ add \rv, \rv, #4 @ omap_uart_virt
+ str \rp, [\rv, #0]
+ mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
+ add \rv, \rv, #4 @ omap_uart_lsr
+ str \rp, [\rv, #0]
b 10b
99:
@@ -131,9 +130,9 @@ omap_uart_lsr: .word 0
.macro busyuart,rd,rx
1001: mrc p15, 0, \rd, c1, c0
- tst \rd, #1 @ MMU enabled?
- ldreq \rd, =__virt_to_phys(omap_uart_lsr)
- ldrne \rd, =omap_uart_lsr
+ tst \rd, #1 @ MMU enabled?
+ ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled
+ ldrne \rd, =omap_uart_lsr @ MMU enabled
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 91e0e39..5e3bf5b 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,12 +10,11 @@
#include <mach/orion5x.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =ORION5X_REGS_PHYS_BASE
- ldrne \rx, =ORION5X_REGS_VIRT_BASE
- orr \rx, \rx, #0x00012000
+ .macro addruart, rp, rv
+ ldr \rp, =ORION5X_REGS_PHYS_BASE
+ ldr \rv, =ORION5X_REGS_VIRT_BASE
+ orr \rp, \rp, #0x00012000
+ orr \rv, \rv, #0x00012000
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 6ca8bd3..931afeb 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,12 +11,10 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- mov \rx, #0x00090000
- addeq \rx, \rx, #0x40000000
- addne \rx, \rx, #0xf4000000
+ .macro addruart, rp, rv
+ mov \rp, #0x00090000
+ add \rv, \rp, #0xf4000000 @ virtual
+ add \rp, \rp, #0x40000000 @ physical
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 01cf813..7d5c751 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,12 +13,10 @@
#include "hardware.h"
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x40000000 @ physical
- movne \rx, #io_p2v(0x40000000) @ virtual
- orr \rx, \rx, #0x00100000
+ .macro addruart, rp, rv
+ mov \rp, #0x00100000
+ orr \rv, \rp, #io_p2v(0x40000000) @ virtual
+ orr \rp, \rp, #0x40000000 @ physical
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 8662228..90b687c 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,12 +33,10 @@
#error "Unknown RealView platform"
#endif
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xfb000000 @ virtual base
- orr \rx, \rx, #DEBUG_LL_UART_OFFSET
+ .macro addruart, rp, rv
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rv, \rp, #0xfb000000 @ virtual base
+ orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 6fc8d66..85effff 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x03000000
- movne \rx, #0xe0000000
- orr \rx, \rx, #0x00010000
- orr \rx, \rx, #0x00000fe0
+ .macro addruart, rp, rv
+ mov \rp, #0x00010000
+ orr \rp, \rp, #0x00000fe0
+ orr \rv, \rp, #0xe0000000 @ virtual
+ orr \rp, \rp, #0x03000000 @ physical
.endm
#define UART_SHIFT 2
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 0eef78b..5882dea 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,13 +19,12 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C24XX_PA_UART
- ldrne \rx, = S3C24XX_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C24XX_PA_UART
+ ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
index 239476b..0c5a738 100644
--- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C24XX_PA_UART
- ldrne \rx, = S3C24XX_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C24XX_PA_UART
+ ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index f9ab5d2..a29e705 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, rtmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+ .macro addruart, rp, rv
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s5p6440/include/mach/debug-macro.S b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
index 1347d7f..f4c20ee 100644
--- a/arch/arm/mach-s5p6440/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6440/include/mach/debug-macro.S
@@ -19,13 +19,12 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, rtmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = S3C_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
index bb65361..e221320 100644
--- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p6442/include/mach/debug-macro.S
@@ -15,13 +15,12 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
- .macro addruart, rx, rtmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = S3C_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index 70e02e9..b2ba95d 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,13 +22,12 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, rtmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = S3C_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 7872f5c..169fe65 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,13 +21,12 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1
- ldreq \rx, = S3C_PA_UART
- ldrne \rx, = S3C_VA_UART
+ .macro addruart, rp, rv
+ ldr \rp, = S3C_PA_UART
+ ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
- add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+ add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
#endif
.endm
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 336adcc..0cd0fc9 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,33 +12,37 @@
*/
#include <mach/hardware.h>
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x80000000 @ physical base address
- movne \rx, #0xf8000000 @ virtual address
+ .macro addruart, rp, rv
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ moveq \rp, #0x80000000 @ physical base address
+ movne \rp, #0xf8000000 @ virtual address
@ We probe for the active serial port here, coherently with
@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
@ We assume r1 can be clobbered.
@ see if Ser3 is active
- add \rx, \rx, #0x00050000
- ldr r1, [\rx, #UTCR3]
- tst r1, #UTCR3_TXE
+ add \rp, \rp, #0x00050000
+ ldr \rv, [\rp, #UTCR3]
+ tst \rv, #UTCR3_TXE
@ if Ser3 is inactive, then try Ser1
- addeq \rx, \rx, #(0x00010000 - 0x00050000)
- ldreq r1, [\rx, #UTCR3]
- tsteq r1, #UTCR3_TXE
+ addeq \rp, \rp, #(0x00010000 - 0x00050000)
+ ldreq \rv, [\rp, #UTCR3]
+ tsteq \rv, #UTCR3_TXE
@ if Ser1 is inactive, then try Ser2
- addeq \rx, \rx, #(0x00030000 - 0x00010000)
- ldreq r1, [\rx, #UTCR3]
- tsteq r1, #UTCR3_TXE
+ addeq \rp, \rp, #(0x00030000 - 0x00010000)
+ ldreq \rv, [\rp, #UTCR3]
+ tsteq \rv, #UTCR3_TXE
+
+ @ clear top bits, and generate both phys and virt addresses
+ lsl \rp, \rp, #8
+ lsr \rp, \rp, #8
+ orr \rv, \rp, #0xf8000000 @ virtual
+ orr \rp, \rp, #0x80000000 @ physical
- @ if all ports are inactive, then there is nothing we can do
- moveq pc, lr
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index 5ea24d4..a473f55 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,9 +11,10 @@
*
*/
- .macro addruart, rx, tmp
- mov \rx, #0xe0000000
- orr \rx, \rx, #0x000003f8
+ .macro addruart, rp, rv
+ mov \rp, #0xe0000000
+ orr \rp, \rp, #0x000003f8
+ mov \rv, \rp
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 55a3956..8ea3bff 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -20,24 +20,28 @@
#include <mach/io.h>
- .macro addruart,rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =IO_APB_PHYS @ physical
- ldrne \rx, =IO_APB_VIRT @ virtual
+ .macro addruart, rp, rv
+ ldreq \rp, =IO_APB_PHYS @ physical
+ ldrne \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
- orr \rx, \rx, #0x6000
+ orr \rp, \rp, #0x6000
+ orr \rv, \rv, #0x6000
#elif defined(CONFIG_TEGRA_DEBUG_UARTB)
- ldr \tmp, =0x6040
- orr \rx, \rx, \tmp
+ orr \rp, \rp, #0x6000
+ orr \rp, \rp, #0x40
+ orr \rv, \rv, #0x6000
+ orr \rv, \rv, #0x40
#elif defined(CONFIG_TEGRA_DEBUG_UARTC)
- orr \rx, \rx, #0x6200
+ orr \rp, \rp, #0x6200
+ orr \rv, \rv, #0x6200
#elif defined(CONFIG_TEGRA_DEBUG_UARTD)
- orr \rx, \rx, #0x6300
+ orr \rp, \rp, #0x6300
+ orr \rv, \rv, #0x6300
#elif defined(CONFIG_TEGRA_DEBUG_UARTE)
- orr \rx, \rx, #0x6400
+ orr \rp, \rp, #0x6400
+ orr \rv, \rv, #0x6400
#endif
.endm
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index 92c1242..df71570 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,13 +10,12 @@
*/
#include <mach/hardware.h>
- .macro addruart, rx, tmp
+ .macro addruart, rp, rv
/* If we move the address using MMU, use this. */
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
- ldrne \rx, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
- orr \rx, \rx, #0x00003000
+ ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
+ ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
+ orr \rp, \rp, #0x00003000
+ orr \rv, \rv, #0x00003000
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index c5203b7..be7c0f1 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -18,11 +18,9 @@
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =UART_BASE @ no, physical address
- ldrne \rx, =IO_ADDRESS(UART_BASE) @ yes, virtual address
+ .macro addruart, rp, rv
+ ldr \rp, =UART_BASE @ no, physical address
+ ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index 6fea719..eb2cf7d 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,13 +11,11 @@
*
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xf1000000 @ virtual base
- orr \rx, \rx, #0x001F0000
- orr \rx, \rx, #0x00001000
+ .macro addruart, rp, rv
+ mov \rp, #0x001F0000
+ orr \rp, \rp, #0x00001000
+ orr \rv, \rp, #0xf1000000 @ virtual base
+ orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 5167e2a..050d65e 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,12 +12,10 @@
#define DEBUG_LL_UART_OFFSET 0x00009000
- .macro addruart,rx,tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x10000000
- movne \rx, #0xf8000000 @ virtual base
- orr \rx, \rx, #DEBUG_LL_UART_OFFSET
+ .macro addruart,rp,rv
+ mov \rp, #DEBUG_LL_UART_OFFSET
+ orr \rv, \rp, #0xf8000000 @ virtual base
+ orr \rp, \rp, #0x10000000 @ physical base
.endm
#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 2560640..d56213f 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -62,11 +62,9 @@
#define UART_PADDR MXC91231_UART2_BASE_ADDR
#define UART_VADDR MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
#endif
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- ldreq \rx, =UART_PADDR @ physical
- ldrne \rx, =UART_VADDR @ virtual
+ .macro addruart, rp, rv
+ ldr \rp, =UART_PADDR @ physical
+ ldr \rv, =UART_VADDR @ virtual
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 37fa593..e91270e 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,11 +14,9 @@
#include <linux/amba/serial.h>
#include <mach/spear.h>
- .macro addruart, rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #SPEAR_DBG_UART_BASE @ Physical base
- movne \rx, #VA_SPEAR_DBG_UART_BASE @ Virtual base
+ .macro addruart, rp, rv
+ mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
+ mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
.macro senduart, rd, rx
diff --git a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
index 1b9348b..d3a0985 100644
--- a/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
+++ b/arch/arm/plat-stmp3xxx/include/mach/debug-macro.S
@@ -16,13 +16,10 @@
* http://www.gnu.org/copyleft/gpl.html
*/
- .macro addruart, rx, tmp
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x80000000 @ physical base address
- addeq \rx, \rx, #0x00070000
- movne \rx, #0xf0000000 @ virtual base
- addne \rx, \rx, #0x00070000
+ .macro addruart, rp, rv
+ mov \rp, #0x00070000
+ add \rv, \rp, #0xf0000000 @ virtual base
+ add \rp, \rp, #0x80000000 @ physical base
.endm
.macro senduart,rd,rx
More information about the linux-arm-kernel
mailing list