[PATCH 3/3 v2] dmaengine: Add Freescale i.MX SDMA support

[Sascha Hauer]

On Sun, Aug 29, 2010 at 02:35:01PM +0200, Linus Walleij wrote:
> 2010/8/28 Sascha Hauer <s.hauer at pengutronix.de>:
> 
> > Peripherals integrated into a SoC like the SDMA engine here are
> > normally accessible in native endianess and thus need the __raw_*
> > functions.
> 
> So the SDMA actually switch and twist around the endianness of
> its registers if it's synthesized into a bigendian version of the system?
> 
> Or hardware-dynamically even depending on the setting of the
> endianness bit in the ARM core?

I think it's the bus between the ARM core and the periherals which
changes the endianess. I have never tried running an i.MX in big endian
mode, so I can only guess how the system really behaves in BE mode.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |