[PATCH 21/24] msm: add MSM8x60 FFA support

[Jeff Ohlstein]

From: Gregory Bean <gbean at codeaurora.org>

The MSM8X60 FFA contains different components than the MSM8X60 SURF,
and therefore requires a different ARCH type and machine ID.

Signed-off-by: Gregory Bean <gbean at codeaurora.org>
---
 arch/arm/mach-msm/Kconfig         |    7 +++++++
 arch/arm/mach-msm/Makefile        |    1 +
 arch/arm/mach-msm/board-msm8x60.c |    7 +++++++
 3 files changed, 15 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index d2610a3..d6b83de 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -112,6 +112,13 @@ config MACH_MSM8X60_SIM
 	help
 	  Support for the Qualcomm MSM8x60 simulator.
 
+config MACH_MSM8X60_FFA
+	depends on ARCH_MSM8X60
+	default n
+	bool "MSM8x60 FFA"
+	help
+	  Support for the Qualcomm MSM8x60 FFA eval board.
+
 endmenu
 
 config MSM_DEBUG_UART
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 9fb73ab..c984f4d 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -30,3 +30,4 @@ obj-$(CONFIG_HOTPLUG_CPU)        += hotplug.o
 obj-$(CONFIG_MACH_MSM8X60_RUMI3) += board-msm8x60.o
 obj-$(CONFIG_MACH_MSM8X60_SURF) += board-msm8x60.o
 obj-$(CONFIG_MACH_MSM8X60_SIM) += board-msm8x60.o
+obj-$(CONFIG_MACH_MSM8X60_FFA) += board-msm8x60.o
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 7a2ed7f..02d22ea 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -93,3 +93,10 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
+
+MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+	.map_io = msm8x60_map_io,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
-- 
1.7.2.1

Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.