[PATCH 08/13] PXA: Colibri: Toradex Colibri PXA270 CF support
Daniel Mack
daniel at caiaq.de
Sat Aug 21 05:33:40 EDT 2010
On Sat, Aug 21, 2010 at 08:22:15AM +0200, Marek Vasut wrote:
> Dne St 18. srpna 2010 13:43:26 Daniel Mack napsal(a):
> > Hi Marek,
> >
> > On Fri, Aug 13, 2010 at 06:32:39AM +0200, Marek Vasut wrote:
> > > This driver also contains structures to eventually support PXA320. This
> > > is planned to be added in a later patch.
> > >
> > > Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> >
> > I have currently no access to my Colibri hardware, but the changes to
> > the code look sane and totally make sense to me. You can add my
> >
> > Acked-by: Daniel Mack <daniel at caiaq.de>
>
> Hi Dan,
>
> do I have this for all the colibri patches in the tree? Thanks
Yes, I think they're fine, so take it :) But as I say - I couldn't test
this due to lack of hardware.
Thanks,
Daniel
> > > ---
> > >
> > > arch/arm/mach-pxa/colibri-pxa270-evalboard.c | 18 ++
> > > drivers/pcmcia/Kconfig | 2 +-
> > > drivers/pcmcia/Makefile | 1 +
> > > drivers/pcmcia/pxa2xx_colibri.c | 215
> > > ++++++++++++++++++++++++++ 4 files changed, 235 insertions(+), 1
> > > deletions(-)
> > > create mode 100644 drivers/pcmcia/pxa2xx_colibri.c
> > >
> > > diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> > > b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c index 0f3b632..6177ff5
> > > 100644
> > > --- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> > > +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> > > @@ -51,6 +51,24 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[]
> > > __initdata = {
> > >
> > > GPIO89_USBH1_PEN,
> > > GPIO119_USBH2_PWR,
> > > GPIO120_USBH2_PEN,
> > >
> > > +
> > > + /* PCMCIA */
> > > + GPIO85_nPCE_1,
> > > + GPIO54_nPCE_2,
> > > + GPIO55_nPREG,
> > > + GPIO50_nPIOR,
> > > + GPIO51_nPIOW,
> > > + GPIO49_nPWE,
> > > + GPIO48_nPOE,
> > > + GPIO57_nIOIS16,
> > > + GPIO56_nPWAIT,
> > > + GPIO104_PSKTSEL,
> > > + GPIO53_GPIO, /* RESET */
> > > + GPIO83_GPIO, /* BVD1 */
> > > + GPIO82_GPIO, /* BVD2 */
> > > + GPIO1_GPIO, /* READY */
> > > + GPIO84_GPIO, /* DETECT */
> > > + GPIO107_GPIO, /* PPEN */
> > >
> > > };
> > >
> > > /***********************************************************************
> > > *******
> > >
> > > diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> > > index ef2f659..883623a 100644
> > > --- a/drivers/pcmcia/Kconfig
> > > +++ b/drivers/pcmcia/Kconfig
> > > @@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
> > >
> > > depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
> > >
> > > || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
> > > || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
> > >
> > > - || MACH_VPAC270 || MACH_BALLOON3)
> > > + || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI)
> > >
> > > select PCMCIA_SOC_COMMON
> > > help
> > >
> > > Say Y here to include support for the PXA2xx PCMCIA controller
> > >
> > > diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
> > > index 6a60773..0e989a1 100644
> > > --- a/drivers/pcmcia/Makefile
> > > +++ b/drivers/pcmcia/Makefile
> > > @@ -71,6 +71,7 @@ pxa2xx-obj-$(CONFIG_MACH_E740) +=
> pxa2xx_e740.o
> > >
> > > pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
> > > pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
> > > pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
> > >
> > > +pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
> > >
> > > obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o
> $(pxa2xx-obj-y)
> > >
> > > diff --git a/drivers/pcmcia/pxa2xx_colibri.c
> > > b/drivers/pcmcia/pxa2xx_colibri.c new file mode 100644
> > > index 0000000..8373816
> > > --- /dev/null
> > > +++ b/drivers/pcmcia/pxa2xx_colibri.c
> > > @@ -0,0 +1,215 @@
> > > +/*
> > > + * linux/drivers/pcmcia/pxa2xx_colibri.c
> > > + *
> > > + * Driver for Toradex Colibri PXA270 CF socket
> > > + *
> > > + * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
> > > + *
> > > + * This program is free software; you can redistribute it and/or modify
> > > + * it under the terms of the GNU General Public License version 2 as
> > > + * published by the Free Software Foundation.
> > > + *
> > > + */
> > > +
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/delay.h>
> > > +
> > > +#include <asm/mach-types.h>
> > > +
> > > +#include <mach/gpio.h>
> > > +
> > > +#include "soc_common.h"
> > > +
> > > +#define COLIBRI270_RESET_GPIO 53
> > > +#define COLIBRI270_PPEN_GPIO 107
> > > +#define COLIBRI270_BVD1_GPIO 83
> > > +#define COLIBRI270_BVD2_GPIO 82
> > > +#define COLIBRI270_DETECT_GPIO 84
> > > +#define COLIBRI270_READY_GPIO 1
> > > +
> > > +static struct {
> > > + int reset_gpio;
> > > + int ppen_gpio;
> > > + int bvd1_gpio;
> > > + int bvd2_gpio;
> > > + int detect_gpio;
> > > + int ready_gpio;
> > > +} colibri_pcmcia_gpio;
> > > +
> > > +static struct pcmcia_irqs colibri_irqs[] = {
> > > + {
> > > + .sock = 0,
> > > + .str = "PCMCIA CD"
> > > + },
> > > +};
> > > +
> > > +static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
> > > +{
> > > + int ret;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
> > > + if (ret)
> > > + goto err1;
> > > + ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
> > > + if (ret)
> > > + goto err2;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
> > > + if (ret)
> > > + goto err2;
> > > + ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
> > > + if (ret)
> > > + goto err3;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
> > > + if (ret)
> > > + goto err3;
> > > + ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
> > > + if (ret)
> > > + goto err4;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
> > > + if (ret)
> > > + goto err4;
> > > + ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
> > > + if (ret)
> > > + goto err5;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
> > > + if (ret)
> > > + goto err5;
> > > + ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
> > > + if (ret)
> > > + goto err6;
> > > +
> > > + ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
> > > + if (ret)
> > > + goto err6;
> > > + ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
> > > + if (ret)
> > > + goto err7;
> > > +
> > > + colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
> > > + skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
> > > +
> > > + return soc_pcmcia_request_irqs(skt, colibri_irqs,
> > > + ARRAY_SIZE(colibri_irqs));
> > > +
> > > +err7:
> > > + gpio_free(colibri_pcmcia_gpio.detect_gpio);
> > > +err6:
> > > + gpio_free(colibri_pcmcia_gpio.ready_gpio);
> > > +err5:
> > > + gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
> > > +err4:
> > > + gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
> > > +err3:
> > > + gpio_free(colibri_pcmcia_gpio.reset_gpio);
> > > +err2:
> > > + gpio_free(colibri_pcmcia_gpio.ppen_gpio);
> > > +err1:
> > > + return ret;
> > > +}
> > > +
> > > +static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
> > > +{
> > > + gpio_free(colibri_pcmcia_gpio.detect_gpio);
> > > + gpio_free(colibri_pcmcia_gpio.ready_gpio);
> > > + gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
> > > + gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
> > > + gpio_free(colibri_pcmcia_gpio.reset_gpio);
> > > + gpio_free(colibri_pcmcia_gpio.ppen_gpio);
> > > +}
> > > +
> > > +static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
> > > + struct pcmcia_state *state)
> > > +{
> > > +
> > > + state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
> > > + state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
> > > + state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
> > > + state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
> > > + state->wrprot = 0;
> > > + state->vs_3v = 1;
> > > + state->vs_Xv = 0;
> > > +}
> > > +
> > > +static int
> > > +colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
> > > + const socket_state_t *state)
> > > +{
> > > + gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
> > > + !(state->Vcc == 33 && state->Vpp < 50));
> > > + gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags &
> > > SS_RESET); + return 0;
> > > +}
> > > +
> > > +static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
> > > +{
> > > +}
> > > +
> > > +static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
> > > +{
> > > +}
> > > +
> > > +static struct pcmcia_low_level colibri_pcmcia_ops = {
> > > + .owner = THIS_MODULE,
> > > +
> > > + .first = 0,
> > > + .nr = 1,
> > > +
> > > + .hw_init = colibri_pcmcia_hw_init,
> > > + .hw_shutdown = colibri_pcmcia_hw_shutdown,
> > > +
> > > + .socket_state = colibri_pcmcia_socket_state,
> > > + .configure_socket = colibri_pcmcia_configure_socket,
> > > +
> > > + .socket_init = colibri_pcmcia_socket_init,
> > > + .socket_suspend = colibri_pcmcia_socket_suspend,
> > > +};
> > > +
> > > +static struct platform_device *colibri_pcmcia_device;
> > > +
> > > +static int __init colibri_pcmcia_init(void)
> > > +{
> > > + int ret;
> > > +
> > > + colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
> > > + if (!colibri_pcmcia_device)
> > > + return -ENOMEM;
> > > +
> > > + /* Colibri PXA270 */
> > > + if (machine_is_colibri()) {
> > > + colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
> > > + colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
> > > + colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
> > > + colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
> > > + colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
> > > + colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
> > > + }
> > > +
> > > + ret = platform_device_add_data(colibri_pcmcia_device,
> > > + &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
> > > +
> > > + if (!ret)
> > > + ret = platform_device_add(colibri_pcmcia_device);
> > > +
> > > + if (ret)
> > > + platform_device_put(colibri_pcmcia_device);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static void __exit colibri_pcmcia_exit(void)
> > > +{
> > > + platform_device_unregister(colibri_pcmcia_device);
> > > +}
> > > +
> > > +module_init(colibri_pcmcia_init);
> > > +module_exit(colibri_pcmcia_exit);
> > > +
> > > +MODULE_AUTHOR("Marek Vasut <marek.vasut at gmail.com>");
> > > +MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270");
> > > +MODULE_ALIAS("platform:pxa2xx-pcmcia");
> > > +MODULE_LICENSE("GPL");
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list