[PATCH 2/3] ARM: S5PC210: Add missing GPIO MP0_0 definition

Kukjin Kim kgene.kim at samsung.com
Fri Aug 20 06:06:34 EDT 2010


Kukjin Kim wrote:
> 
> Kyungmin Park wrote:
> >
> > From: Kyungmin Park <kyungmin.park at samsung.com>
> >
> > Some board uses the MP0_0 for GPIO.
> >
> > Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> > ---
> >  arch/arm/mach-s5pv310/include/mach/gpio.h |    5 ++++-
> >  1 files changed, 4 insertions(+), 1 deletions(-)
> >
> > diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-
> > s5pv310/include/mach/gpio.h
> > index a840d83..4ab4e23 100644
> > --- a/arch/arm/mach-s5pv310/include/mach/gpio.h
> > +++ b/arch/arm/mach-s5pv310/include/mach/gpio.h
> > @@ -55,6 +55,7 @@
> >  #define S5PV310_GPIO_X2_NR	(8)
> >  #define S5PV310_GPIO_X3_NR	(8)
> >  #define S5PV310_GPIO_Z_NR	(7)
> > +#define S5PV310_GPIO_MP00_NR	(8)
> >  #define S5PV310_GPIO_MP01_NR	(8)
> >  #define S5PV310_GPIO_MP02_NR	(4)
> >  #define S5PV310_GPIO_MP03_NR	(8)
> > @@ -96,7 +97,8 @@ enum s5p_gpio_number {
> >  	S5PV310_GPIO_X2_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
> >  	S5PV310_GPIO_X3_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
> >  	S5PV310_GPIO_Z_START	= S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
> > -	S5PV310_GPIO_MP01_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_Z),
> > +	S5PV310_GPIO_MP00_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_Z),
> > +	S5PV310_GPIO_MP01_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_MP00),
> >  	S5PV310_GPIO_MP02_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_MP01),
> >  	S5PV310_GPIO_MP03_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_MP02),
> >  	S5PV310_GPIO_MP04_START	=
> > S5PV310_GPIO_NEXT(S5PV310_GPIO_MP03),
> > @@ -133,6 +135,7 @@ enum s5p_gpio_number {
> >  #define S5PV310_GPX2(_nr)	(S5PV310_GPIO_X2_START + (_nr))
> >  #define S5PV310_GPX3(_nr)	(S5PV310_GPIO_X3_START + (_nr))
> >  #define S5PV310_GPZ(_nr)	(S5PV310_GPIO_Z_START + (_nr))
> > +#define S5PV310_MP00(_nr)	(S5PV310_GPIO_MP00_START + (_nr))
> >  #define S5PV310_MP01(_nr)	(S5PV310_GPIO_MP01_START + (_nr))
> >  #define S5PV310_MP02(_nr)	(S5PV310_GPIO_MP02_START + (_nr))
> >  #define S5PV310_MP03(_nr)	(S5PV310_GPIO_MP03_START + (_nr))
> > --
> 
> Should be merged previous '[PATCH] ARM: S5PC210: Define more GPIOs to use
> the MP pins' and this.
> 
I didn't get updated patch...could you please re-submit updated one?

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.




More information about the linux-arm-kernel mailing list