[PATCH 1/2] s3c24xx: DMA: don't use autoreload feature
Vasily Khoruzhick
anarsoul at gmail.com
Wed Aug 18 11:04:25 EDT 2010
Some integrated DMA-capable hardware doesn't like autoreload
feature of s3c24xx DMA-engine, that's why s3cmci driver
didn't work with DMA transfers enabled.
I rewrote DMA driver not to use autoreload feature and removed
all pre-loading features. Buffer re-load is fast enought to perform
it in IRQ handler, and anyway I don't see any reason to waste CPU
cycles on waiting for buffer load. Driver is much simplier now,
it was tested with s3cmci and s3c24xx-i2s drivers on s3c2442 and
s3c2410 SoCs and works just nice.
Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
arch/arm/mach-s3c2410/include/mach/dma.h | 13 +-
arch/arm/plat-s3c24xx/dma.c | 426 +++++-------------------------
2 files changed, 68 insertions(+), 371 deletions(-)
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index cf68136..198826f 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -79,16 +79,9 @@ enum s3c2410_dma_state {
*
* There are no buffers loaded (the channel should be inactive)
*
- * S3C2410_DMA_1LOADED
- *
- * There is one buffer loaded, however it has not been confirmed to be
- * loaded by the DMA engine. This may be because the channel is not
- * yet running, or the DMA driver decided that it was too costly to
- * sit and wait for it to happen.
- *
* S3C2410_DMA_1RUNNING
*
- * The buffer has been confirmed running, and not finisged
+ * The buffer has been confirmed running, and not finished
*
* S3C2410_DMA_1LOADED_1RUNNING
*
@@ -98,9 +91,7 @@ enum s3c2410_dma_state {
enum s3c2410_dma_loadst {
S3C2410_DMALOAD_NONE,
- S3C2410_DMALOAD_1LOADED,
S3C2410_DMALOAD_1RUNNING,
- S3C2410_DMALOAD_1LOADED_1RUNNING,
};
@@ -129,6 +120,7 @@ struct s3c2410_dma_buf {
dma_addr_t data; /* start of DMA data */
dma_addr_t ptr; /* where the DMA got to [1] */
void *id; /* client's id */
+ unsigned int timestamp;
};
/* [1] is this updated for both recv/send modes? */
@@ -189,6 +181,7 @@ struct s3c2410_dma_chan {
struct s3c2410_dma_buf *curr; /* current dma buffer */
struct s3c2410_dma_buf *next; /* next buffer to load */
struct s3c2410_dma_buf *end; /* end of queue */
+ spinlock_t queue_lock;
/* system device */
struct sys_device dev;
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 6ad274e..926fc9e 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -133,70 +133,6 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
-/* s3c2410_dma_stats_timeout
- *
- * Update DMA stats from timeout info
-*/
-
-static void
-s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
-{
- if (stats == NULL)
- return;
-
- if (val > stats->timeout_longest)
- stats->timeout_longest = val;
- if (val < stats->timeout_shortest)
- stats->timeout_shortest = val;
-
- stats->timeout_avg += val;
-}
-
-/* s3c2410_dma_waitforload
- *
- * wait for the DMA engine to load a buffer, and update the state accordingly
-*/
-
-static int
-s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
-{
- int timeout = chan->load_timeout;
- int took;
-
- if (chan->load_state != S3C2410_DMALOAD_1LOADED) {
- printk(KERN_ERR "dma%d: s3c2410_dma_waitforload() called in loadstate %d from line %d\n", chan->number, chan->load_state, line);
- return 0;
- }
-
- if (chan->stats != NULL)
- chan->stats->loads++;
-
- while (--timeout > 0) {
- if ((dma_rdreg(chan, S3C2410_DMA_DSTAT) << (32-20)) != 0) {
- took = chan->load_timeout - timeout;
-
- s3c2410_dma_stats_timeout(chan->stats, took);
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1LOADED:
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- break;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in s3c2410_dma_waitforload() %d\n", chan->number, chan->load_state);
- }
-
- return 1;
- }
- }
-
- if (chan->stats != NULL) {
- chan->stats->timeout_failed++;
- }
-
- return 0;
-}
-
/* s3c2410_dma_loadbuffer
*
* load a buffer, and update the channel state
@@ -206,8 +142,6 @@ static inline int
s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
struct s3c2410_dma_buf *buf)
{
- unsigned long reload;
-
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
@@ -218,26 +152,9 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
/* check the state of the channel before we do anything */
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
- dmawarn("load_state is S3C2410_DMALOAD_1LOADED\n");
- }
-
- if (chan->load_state == S3C2410_DMALOAD_1LOADED_1RUNNING) {
- dmawarn("state is S3C2410_DMALOAD_1LOADED_1RUNNING\n");
- }
-
- /* it would seem sensible if we are the last buffer to not bother
- * with the auto-reload bit, so that the DMA engine will not try
- * and load another transfer after this one has finished...
- */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("load_state is none, checking for noreload (next=%p)\n",
- buf->next);
- reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0;
- } else {
- //pr_debug("load_state is %d => autoreload\n", chan->load_state);
- reload = S3C2410_DCON_AUTORELOAD;
- }
+ if (chan->load_state != S3C2410_DMALOAD_NONE)
+ printk(KERN_ERR "dma%d: channel already has buffer loaded\n",
+ chan->number);
if ((buf->data & 0xf0000000) != 0x30000000) {
dmawarn("dmaload: buffer is %p\n", (void *)buf->data);
@@ -246,26 +163,15 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
writel(buf->data, chan->addr_reg);
dma_wrreg(chan, S3C2410_DMA_DCON,
- chan->dcon | reload | (buf->size/chan->xfer_unit));
+ chan->dcon | S3C2410_DCON_NORELOAD |
+ (buf->size/chan->xfer_unit));
- chan->next = buf->next;
+ chan->curr = buf;
/* update the state of the channel */
+ chan->load_state = S3C2410_DMALOAD_1RUNNING;
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_1RUNNING:
- chan->load_state = S3C2410_DMALOAD_1LOADED_1RUNNING;
- break;
-
- default:
- dmawarn("dmaload: unknown state %d in loadbuffer\n",
- chan->load_state);
- break;
- }
+ buf->timestamp = jiffies;
return 0;
}
@@ -345,7 +251,6 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
dbg_showchan(chan);
/* enable the channel */
-
if (!chan->irq_enabled) {
enable_irq(chan->irq);
chan->irq_enabled = 1;
@@ -360,14 +265,6 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp);
-#if 0
- /* the dma buffer loads should take care of clearing the AUTO
- * reloading feature */
- tmp = dma_rdreg(chan, S3C2410_DMA_DCON);
- tmp &= ~S3C2410_DCON_NORELOAD;
- dma_wrreg(chan, S3C2410_DMA_DCON, tmp);
-#endif
-
s3c2410_dma_call_op(chan, S3C2410_DMAOP_START);
dbg_showchan(chan);
@@ -377,43 +274,11 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
* the first buffer is finished, the new one will be loaded onto
* the channel */
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __func__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
local_irq_restore(flags);
return 0;
}
-/* s3c2410_dma_canload
- *
- * work out if we can queue another buffer into the DMA engine
-*/
-
-static int
-s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
-{
- if (chan->load_state == S3C2410_DMALOAD_NONE ||
- chan->load_state == S3C2410_DMALOAD_1RUNNING)
- return 1;
-
- return 0;
-}
-
/* s3c2410_dma_enqueue
*
* queue an given buffer for dma transfer.
@@ -462,47 +327,19 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
local_irq_save(flags);
- if (chan->curr == NULL) {
- /* we've got nothing loaded... */
- pr_debug("%s: buffer %p queued onto empty channel\n",
- __func__, buf);
-
- chan->curr = buf;
- chan->end = buf;
- chan->next = NULL;
+ if (chan->end == NULL) {
+ pr_debug("dma%d: queued buffer onto empty channel\n",
+ chan->number);
+ chan->next = buf;
+ chan->end = buf;
} else {
- pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
- chan->number, __func__, buf);
-
- if (chan->end == NULL)
- pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
- chan->number, __func__, chan);
-
+ pr_debug("dma%d: queued buffer onto non-empty channel\n",
+ chan->number);
chan->end->next = buf;
chan->end = buf;
}
- /* if necessary, update the next buffer field */
- if (chan->next == NULL)
- chan->next = buf;
-
- /* check to see if we can load a buffer */
- if (chan->state == S3C2410_DMA_RUNNING) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED && 1) {
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- printk(KERN_ERR "dma%d: loadbuffer:"
- "timeout loading buffer\n",
- chan->number);
- dbg_showchan(chan);
- local_irq_restore(flags);
- return -EINVAL;
- }
- }
-
- while (s3c2410_dma_canload(chan) && chan->next != NULL) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- } else if (chan->state == S3C2410_DMA_IDLE) {
+ if (chan->state == S3C2410_DMA_IDLE) {
if (chan->flags & S3C2410_DMAF_AUTOSTART) {
s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
S3C2410_DMAOP_START);
@@ -529,51 +366,6 @@ s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
}
}
-/* s3c2410_dma_lastxfer
- *
- * called when the system is out of buffers, to ensure that the channel
- * is prepared for shutdown.
-*/
-
-static inline void
-s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
-{
-#if 0
- pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
- chan->number, chan->load_state);
-#endif
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_NONE:
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __func__);
- return;
- }
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* I belive in this case we do not have anything to do
- * until the next buffer comes along, and we turn off the
- * reload */
- return;
-
- default:
- pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n",
- chan->number, chan->load_state);
- return;
-
- }
-
- /* hopefully this'll shut the damned thing up after the transfer... */
- dma_wrreg(chan, S3C2410_DMA_DCON, chan->dcon | S3C2410_DCON_NORELOAD);
-}
-
-
#define dmadbg2(x...)
static irqreturn_t
@@ -582,57 +374,25 @@ s3c2410_dma_irq(int irq, void *devpw)
struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
struct s3c2410_dma_buf *buf;
+ /* Check for orphaned irq */
+ if (chan->state == S3C2410_DMA_IDLE)
+ return IRQ_HANDLED;
+
buf = chan->curr;
dbg_showchan(chan);
/* modify the channel state */
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* TODO - if we are running only one buffer, we probably
- * want to reload here, and then worry about the buffer
- * callback */
-
- chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- /* iirc, we should go back to NONE loaded here, we
- * had a buffer, and it was never verified as being
- * loaded.
- */
-
+ if (chan->load_state == S3C2410_DMALOAD_1RUNNING)
chan->load_state = S3C2410_DMALOAD_NONE;
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- /* we'll worry about checking to see if another buffer is
- * ready after we've called back the owner. This should
- * ensure we do not wait around too long for the DMA
- * engine to start the next transfer
- */
-
- chan->load_state = S3C2410_DMALOAD_1LOADED;
- break;
-
- case S3C2410_DMALOAD_NONE:
+ else
printk(KERN_ERR "dma%d: IRQ with no loaded buffer?\n",
- chan->number);
- break;
-
- default:
- printk(KERN_ERR "dma%d: IRQ in invalid load_state %d\n",
- chan->number, chan->load_state);
- break;
- }
+ chan->number);
if (buf != NULL) {
- /* update the chain to make sure that if we load any more
- * buffers when we call the callback function, things should
- * work properly */
-
- chan->curr = buf->next;
+ chan->curr = NULL;
+ chan->next = buf->next;
buf->next = NULL;
if (buf->magic != BUF_MAGIC) {
@@ -640,12 +400,14 @@ s3c2410_dma_irq(int irq, void *devpw)
chan->number, __func__, buf);
return IRQ_HANDLED;
}
-
+ pr_debug("dma%d: transfer of size %d took %u ms\n",
+ chan->number,
+ buf->size,
+ jiffies_to_msecs(jiffies - buf->timestamp));
s3c2410_dma_buffdone(chan, buf, S3C2410_RES_OK);
/* free resouces */
s3c2410_dma_freebuf(buf);
- } else {
}
/* only reload if the channel is still running... our buffer done
@@ -655,53 +417,36 @@ s3c2410_dma_irq(int irq, void *devpw)
/* todo: check that when the channel is shut-down from inside this
* function, we cope with unsetting reload, etc */
- if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) {
- unsigned long flags;
-
- switch (chan->load_state) {
- case S3C2410_DMALOAD_1RUNNING:
- /* don't need to do anything for this state */
- break;
-
- case S3C2410_DMALOAD_NONE:
- /* can load buffer immediately */
- break;
-
- case S3C2410_DMALOAD_1LOADED:
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- /* flag error? */
- printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
- chan->number, __func__);
- return IRQ_HANDLED;
- }
-
- break;
-
- case S3C2410_DMALOAD_1LOADED_1RUNNING:
- goto no_load;
-
- default:
- printk(KERN_ERR "dma%d: unknown load_state in irq, %d\n",
- chan->number, chan->load_state);
- return IRQ_HANDLED;
- }
+ if (chan->next != NULL) {
+ if (chan->state != S3C2410_DMA_IDLE) {
+ unsigned long flags;
+ unsigned long tmp;
- local_irq_save(flags);
- s3c2410_dma_loadbuffer(chan, chan->next);
- local_irq_restore(flags);
+ pr_debug("%s: dma%d: continuing with next buffer\n",
+ __func__, chan->number);
+ local_irq_save(flags);
+ s3c2410_dma_loadbuffer(chan, chan->next);
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ tmp &= ~S3C2410_DMASKTRIG_STOP;
+ tmp |= S3C2410_DMASKTRIG_ON;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+ local_irq_restore(flags);
+ } else
+ pr_debug("dma%d: buffdone callback stopped dma...\n",
+ chan->number);
} else {
- s3c2410_dma_lastxfer(chan);
+ /* No more buffers? So no queue */
+ chan->end = NULL;
/* see if we can stop this channel.. */
- if (chan->load_state == S3C2410_DMALOAD_NONE) {
- pr_debug("dma%d: end of transfer, stopping channel (%ld)\n",
+ if (chan->state != S3C2410_DMA_IDLE) {
+ pr_debug("dma%d: end of transfer, stopping channel (%lu)\n",
chan->number, jiffies);
s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL,
S3C2410_DMAOP_STOP);
}
}
- no_load:
return IRQ_HANDLED;
}
@@ -840,9 +585,20 @@ static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
s3c2410_dma_call_op(chan, S3C2410_DMAOP_STOP);
tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
- tmp |= S3C2410_DMASKTRIG_STOP;
- //tmp &= ~S3C2410_DMASKTRIG_ON;
- dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+ if (tmp & S3C2410_DMASKTRIG_ON) {
+ int retries = 1000;
+ tmp |= S3C2410_DMASKTRIG_STOP;
+ dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp);
+
+ while (--retries) {
+ tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
+ if (!(tmp & S3C2410_DMASKTRIG_ON))
+ break;
+ }
+
+ if (!retries)
+ pr_debug("dma%d: failed to stop??\n", chan->number);
+ }
#if 0
/* should also clear interrupts, according to WinCE BSP */
@@ -860,22 +616,6 @@ static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
return 0;
}
-static void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
-{
- unsigned long tmp;
- unsigned int timeout = 0x10000;
-
- while (timeout-- > 0) {
- tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG);
-
- if (!(tmp & S3C2410_DMASKTRIG_ON))
- return;
- }
-
- pr_debug("dma%d: failed to stop?\n", chan->number);
-}
-
-
/* s3c2410_dma_flush
*
* stop the channel, and remove all current and pending transfers
@@ -917,8 +657,6 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
dbg_showregs(chan);
- s3c2410_dma_waitforstop(chan);
-
#if 0
/* should also clear interrupts, according to WinCE BSP */
{
@@ -939,38 +677,8 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
{
- unsigned long flags;
-
- local_irq_save(flags);
-
- dbg_showchan(chan);
-
- /* if we've only loaded one buffer onto the channel, then chec
- * to see if we have another, and if so, try and load it so when
- * the first buffer is finished, the new one will be loaded onto
- * the channel */
-
- if (chan->next != NULL) {
- if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
-
- if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
- pr_debug("%s: buff not yet loaded, no more todo\n",
- __func__);
- } else {
- chan->load_state = S3C2410_DMALOAD_1RUNNING;
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
-
- } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) {
- s3c2410_dma_loadbuffer(chan, chan->next);
- }
- }
-
-
- local_irq_restore(flags);
-
+ /* Do nothing */
return 0;
-
}
int
@@ -1045,16 +753,12 @@ int s3c2410_dma_config(unsigned int channel,
case DMACH_PCM_IN:
case DMACH_PCM_OUT:
case DMACH_MIC_IN:
+ case DMACH_SDI:
default:
dcon |= S3C2410_DCON_HANDSHAKE;
dcon |= S3C2410_DCON_SYNC_PCLK;
break;
- case DMACH_SDI:
- /* note, ensure if need HANDSHAKE or not */
- dcon |= S3C2410_DCON_SYNC_PCLK;
- break;
-
case DMACH_XD0:
case DMACH_XD1:
dcon |= S3C2410_DCON_HANDSHAKE;
--
1.7.2
More information about the linux-arm-kernel
mailing list