[PATCH 08/13] PXA: Colibri: Toradex Colibri PXA270 CF support
Daniel Mack
daniel at caiaq.de
Wed Aug 18 07:43:26 EDT 2010
Hi Marek,
On Fri, Aug 13, 2010 at 06:32:39AM +0200, Marek Vasut wrote:
> This driver also contains structures to eventually support PXA320. This is
> planned to be added in a later patch.
>
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
I have currently no access to my Colibri hardware, but the changes to
the code look sane and totally make sense to me. You can add my
Acked-by: Daniel Mack <daniel at caiaq.de>
Thanks,
Daniel
> ---
> arch/arm/mach-pxa/colibri-pxa270-evalboard.c | 18 ++
> drivers/pcmcia/Kconfig | 2 +-
> drivers/pcmcia/Makefile | 1 +
> drivers/pcmcia/pxa2xx_colibri.c | 215 ++++++++++++++++++++++++++
> 4 files changed, 235 insertions(+), 1 deletions(-)
> create mode 100644 drivers/pcmcia/pxa2xx_colibri.c
>
> diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> index 0f3b632..6177ff5 100644
> --- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> +++ b/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
> @@ -51,6 +51,24 @@ static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
> GPIO89_USBH1_PEN,
> GPIO119_USBH2_PWR,
> GPIO120_USBH2_PEN,
> +
> + /* PCMCIA */
> + GPIO85_nPCE_1,
> + GPIO54_nPCE_2,
> + GPIO55_nPREG,
> + GPIO50_nPIOR,
> + GPIO51_nPIOW,
> + GPIO49_nPWE,
> + GPIO48_nPOE,
> + GPIO57_nIOIS16,
> + GPIO56_nPWAIT,
> + GPIO104_PSKTSEL,
> + GPIO53_GPIO, /* RESET */
> + GPIO83_GPIO, /* BVD1 */
> + GPIO82_GPIO, /* BVD2 */
> + GPIO1_GPIO, /* READY */
> + GPIO84_GPIO, /* DETECT */
> + GPIO107_GPIO, /* PPEN */
> };
>
> /******************************************************************************
> diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
> index ef2f659..883623a 100644
> --- a/drivers/pcmcia/Kconfig
> +++ b/drivers/pcmcia/Kconfig
> @@ -215,7 +215,7 @@ config PCMCIA_PXA2XX
> depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
> || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
> || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
> - || MACH_VPAC270 || MACH_BALLOON3)
> + || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI)
> select PCMCIA_SOC_COMMON
> help
> Say Y here to include support for the PXA2xx PCMCIA controller
> diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
> index 6a60773..0e989a1 100644
> --- a/drivers/pcmcia/Makefile
> +++ b/drivers/pcmcia/Makefile
> @@ -71,6 +71,7 @@ pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
> pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
> pxa2xx-obj-$(CONFIG_MACH_VPAC270) += pxa2xx_vpac270.o
> pxa2xx-obj-$(CONFIG_MACH_BALLOON3) += pxa2xx_balloon3.o
> +pxa2xx-obj-$(CONFIG_MACH_COLIBRI) += pxa2xx_colibri.o
>
> obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
>
> diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
> new file mode 100644
> index 0000000..8373816
> --- /dev/null
> +++ b/drivers/pcmcia/pxa2xx_colibri.c
> @@ -0,0 +1,215 @@
> +/*
> + * linux/drivers/pcmcia/pxa2xx_colibri.c
> + *
> + * Driver for Toradex Colibri PXA270 CF socket
> + *
> + * Copyright (C) 2010 Marek Vasut <marek.vasut at gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/delay.h>
> +
> +#include <asm/mach-types.h>
> +
> +#include <mach/gpio.h>
> +
> +#include "soc_common.h"
> +
> +#define COLIBRI270_RESET_GPIO 53
> +#define COLIBRI270_PPEN_GPIO 107
> +#define COLIBRI270_BVD1_GPIO 83
> +#define COLIBRI270_BVD2_GPIO 82
> +#define COLIBRI270_DETECT_GPIO 84
> +#define COLIBRI270_READY_GPIO 1
> +
> +static struct {
> + int reset_gpio;
> + int ppen_gpio;
> + int bvd1_gpio;
> + int bvd2_gpio;
> + int detect_gpio;
> + int ready_gpio;
> +} colibri_pcmcia_gpio;
> +
> +static struct pcmcia_irqs colibri_irqs[] = {
> + {
> + .sock = 0,
> + .str = "PCMCIA CD"
> + },
> +};
> +
> +static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
> +{
> + int ret;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
> + if (ret)
> + goto err1;
> + ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
> + if (ret)
> + goto err2;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
> + if (ret)
> + goto err2;
> + ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
> + if (ret)
> + goto err3;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
> + if (ret)
> + goto err3;
> + ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
> + if (ret)
> + goto err4;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
> + if (ret)
> + goto err4;
> + ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
> + if (ret)
> + goto err5;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
> + if (ret)
> + goto err5;
> + ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
> + if (ret)
> + goto err6;
> +
> + ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
> + if (ret)
> + goto err6;
> + ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
> + if (ret)
> + goto err7;
> +
> + colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
> + skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
> +
> + return soc_pcmcia_request_irqs(skt, colibri_irqs,
> + ARRAY_SIZE(colibri_irqs));
> +
> +err7:
> + gpio_free(colibri_pcmcia_gpio.detect_gpio);
> +err6:
> + gpio_free(colibri_pcmcia_gpio.ready_gpio);
> +err5:
> + gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
> +err4:
> + gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
> +err3:
> + gpio_free(colibri_pcmcia_gpio.reset_gpio);
> +err2:
> + gpio_free(colibri_pcmcia_gpio.ppen_gpio);
> +err1:
> + return ret;
> +}
> +
> +static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
> +{
> + gpio_free(colibri_pcmcia_gpio.detect_gpio);
> + gpio_free(colibri_pcmcia_gpio.ready_gpio);
> + gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
> + gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
> + gpio_free(colibri_pcmcia_gpio.reset_gpio);
> + gpio_free(colibri_pcmcia_gpio.ppen_gpio);
> +}
> +
> +static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
> + struct pcmcia_state *state)
> +{
> +
> + state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
> + state->ready = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
> + state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
> + state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
> + state->wrprot = 0;
> + state->vs_3v = 1;
> + state->vs_Xv = 0;
> +}
> +
> +static int
> +colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
> + const socket_state_t *state)
> +{
> + gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
> + !(state->Vcc == 33 && state->Vpp < 50));
> + gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
> + return 0;
> +}
> +
> +static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
> +{
> +}
> +
> +static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
> +{
> +}
> +
> +static struct pcmcia_low_level colibri_pcmcia_ops = {
> + .owner = THIS_MODULE,
> +
> + .first = 0,
> + .nr = 1,
> +
> + .hw_init = colibri_pcmcia_hw_init,
> + .hw_shutdown = colibri_pcmcia_hw_shutdown,
> +
> + .socket_state = colibri_pcmcia_socket_state,
> + .configure_socket = colibri_pcmcia_configure_socket,
> +
> + .socket_init = colibri_pcmcia_socket_init,
> + .socket_suspend = colibri_pcmcia_socket_suspend,
> +};
> +
> +static struct platform_device *colibri_pcmcia_device;
> +
> +static int __init colibri_pcmcia_init(void)
> +{
> + int ret;
> +
> + colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
> + if (!colibri_pcmcia_device)
> + return -ENOMEM;
> +
> + /* Colibri PXA270 */
> + if (machine_is_colibri()) {
> + colibri_pcmcia_gpio.reset_gpio = COLIBRI270_RESET_GPIO;
> + colibri_pcmcia_gpio.ppen_gpio = COLIBRI270_PPEN_GPIO;
> + colibri_pcmcia_gpio.bvd1_gpio = COLIBRI270_BVD1_GPIO;
> + colibri_pcmcia_gpio.bvd2_gpio = COLIBRI270_BVD2_GPIO;
> + colibri_pcmcia_gpio.detect_gpio = COLIBRI270_DETECT_GPIO;
> + colibri_pcmcia_gpio.ready_gpio = COLIBRI270_READY_GPIO;
> + }
> +
> + ret = platform_device_add_data(colibri_pcmcia_device,
> + &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
> +
> + if (!ret)
> + ret = platform_device_add(colibri_pcmcia_device);
> +
> + if (ret)
> + platform_device_put(colibri_pcmcia_device);
> +
> + return ret;
> +}
> +
> +static void __exit colibri_pcmcia_exit(void)
> +{
> + platform_device_unregister(colibri_pcmcia_device);
> +}
> +
> +module_init(colibri_pcmcia_init);
> +module_exit(colibri_pcmcia_exit);
> +
> +MODULE_AUTHOR("Marek Vasut <marek.vasut at gmail.com>");
> +MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270");
> +MODULE_ALIAS("platform:pxa2xx-pcmcia");
> +MODULE_LICENSE("GPL");
> --
> 1.7.1
>
More information about the linux-arm-kernel
mailing list