[PATCH v2] ARM: imx: fix build failure concerning otg/ulpi

[Igor Grinberg]

On 08/13/10 15:06, Uwe Kleine-König wrote:
> The build failure was introduced by
>
> 	13dd0c9 (USB: otg/ulpi: extend the generic ulpi driver.)
>
> Cc: Igor Grinberg <grinberg at compulab.co.il>
> Cc: Mike Rapoport <mike at compulab.co.il>
> Cc: Greg Kroah-Hartman <gregkh at suse.de>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
>   

I've based my patches on v2.6.35-rc6, so I could not patch
those imx variants, sorry...
But I did deal with mach-pca100.c, so I think moving it from
mach-mx2 to mach-imx is what made it miss my patch.

Anyway, this looks like the right addition.

Thanks

> ---
>  arch/arm/mach-imx/mach-cpuimx27.c  |    4 ++--
>  arch/arm/mach-imx/mach-pca100.c    |    4 ++--
>  arch/arm/mach-mx25/mach-cpuimx25.c |    2 +-
>  arch/arm/mach-mx3/mach-cpuimx35.c  |    2 +-
>  4 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
> index 575ff1a..339150a 100644
> --- a/arch/arm/mach-imx/mach-cpuimx27.c
> +++ b/arch/arm/mach-imx/mach-cpuimx27.c
> @@ -279,13 +279,13 @@ static void __init eukrea_cpuimx27_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg_host, &otg_pdata);
>  	}
>  
>  	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
>  #endif
> diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
> index a389d11..23c9e1f 100644
> --- a/arch/arm/mach-imx/mach-pca100.c
> +++ b/arch/arm/mach-imx/mach-pca100.c
> @@ -419,13 +419,13 @@ static void __init pca100_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg_host, &otg_pdata);
>  	}
>  
>  	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
>  #endif
> diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-mx25/mach-cpuimx25.c
> index 56b2e26..a5f0174 100644
> --- a/arch/arm/mach-mx25/mach-cpuimx25.c
> +++ b/arch/arm/mach-mx25/mach-cpuimx25.c
> @@ -138,7 +138,7 @@ static void __init eukrea_cpuimx25_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg, &otg_pdata);
>  	}
> diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
> index 63f970f..9770a6a 100644
> --- a/arch/arm/mach-mx3/mach-cpuimx35.c
> +++ b/arch/arm/mach-mx3/mach-cpuimx35.c
> @@ -192,7 +192,7 @@ static void __init mxc_board_init(void)
>  #if defined(CONFIG_USB_ULPI)
>  	if (otg_mode_host) {
>  		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
> -				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
> +				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
>  
>  		mxc_register_device(&mxc_otg_host, &otg_pdata);
>  	}
>   

-- 
Regards,
Igor.