[PATCH 1/5] ARM: S3C64XX: Move SmartQ LCD control platform definition to shared file
Maurus Cuelenaere
mcuelenaere at gmail.com
Fri Aug 13 15:17:52 EDT 2010
This shares the common LCD control platform definition used in the SmartQ 5 and
7. This also corrects it as a GPIO bitbanged SPI device instead of an I²C one,
which was wrong.
Signed-off-by: Maurus Cuelenaere <mcuelenaere at gmail.com>
---
arch/arm/mach-s3c64xx/mach-smartq.c | 32 ++++++++++++++++++++++++++++++--
arch/arm/mach-s3c64xx/mach-smartq5.c | 28 ----------------------------
arch/arm/mach-s3c64xx/mach-smartq7.c | 28 ----------------------------
3 files changed, 30 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 028d080..54309da 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
@@ -184,6 +185,33 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
},
};
+static int __init smartq_lcd_setup_gpio(void)
+{
+ int ret;
+
+ ret = gpio_request(S3C64XX_GPM(3), "LCD power");
+ if (ret < 0)
+ return ret;
+
+ /* turn power off */
+ gpio_direction_output(S3C64XX_GPM(3), 0);
+
+ return 0;
+}
+
+/* GPM0 -> CS */
+static struct spi_gpio_platform_data smartq_lcd_control = {
+ .sck = S3C64XX_GPM(1),
+ .mosi = S3C64XX_GPM(2),
+ .miso = S3C64XX_GPM(2),
+};
+
+static struct platform_device smartq_lcd_control_device = {
+ .name = "spi-gpio",
+ .id = 1,
+ .dev.platform_data = &smartq_lcd_control,
+};
+
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
gpio_direction_output(S3C64XX_GPM(3), power);
@@ -199,7 +227,6 @@ static struct platform_device smartq_lcd_power_device = {
.dev.platform_data = &smartq_lcd_power_data,
};
-
static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_hsmmc0, /* ... then the external SD card */
@@ -214,6 +241,7 @@ static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_ts,
&s3c_device_usb_hsotg,
&smartq_backlight_device,
+ &smartq_lcd_control_device,
&smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev,
};
@@ -252,7 +280,6 @@ static int __init smartq_power_off_init(void)
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
-
pm_power_off = smartq_power_off;
return ret;
@@ -354,6 +381,7 @@ void __init smartq_machine_init(void)
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
+ WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init());
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index a065062..2bfa708 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -12,7 +12,6 @@
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
@@ -33,31 +32,6 @@
#include "mach-smartq.h"
-static void __init smartq5_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
- gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
- gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_input(S3C64XX_GPM(1));
- gpio_direction_input(S3C64XX_GPM(2));
- gpio_direction_output(S3C64XX_GPM(3), 0);
-}
-
-static struct i2c_gpio_platform_data smartq5_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
-};
-
-static struct platform_device smartq5_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq5_lcd_control,
-};
-
static struct gpio_led smartq5_leds[] __initdata = {
{
.name = "smartq5:green",
@@ -159,7 +133,6 @@ static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
- &smartq5_lcd_control_device,
};
static void __init smartq5_machine_init(void)
@@ -167,7 +140,6 @@ static void __init smartq5_machine_init(void)
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
- smartq5_lcd_setup_gpio();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 0ecf451..e50a7d7 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -12,7 +12,6 @@
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
@@ -33,31 +32,6 @@
#include "mach-smartq.h"
-static void __init smartq7_lcd_setup_gpio(void)
-{
- gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
- gpio_request(S3C64XX_GPM(3), "LCD power");
- gpio_request(S3C64XX_GPM(4), "LCD power status");
-
- /* turn power off */
- gpio_direction_output(S3C64XX_GPM(0), 1);
- gpio_direction_output(S3C64XX_GPM(3), 0);
- gpio_direction_input(S3C64XX_GPM(4));
-}
-
-static struct i2c_gpio_platform_data smartq7_lcd_control = {
- .sda_pin = S3C64XX_GPM(2),
- .scl_pin = S3C64XX_GPM(1),
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device smartq7_lcd_control_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &smartq7_lcd_control,
-};
-
static struct gpio_led smartq7_leds[] __initdata = {
{
.name = "smartq7:red",
@@ -175,7 +149,6 @@ static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device,
&smartq7_buttons_device,
- &smartq7_lcd_control_device,
};
static void __init smartq7_machine_init(void)
@@ -183,7 +156,6 @@ static void __init smartq7_machine_init(void)
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
- smartq7_lcd_setup_gpio();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
--
1.7.0.4
More information about the linux-arm-kernel
mailing list