[rtc-linux] [PATCH 1/2] rtc: rtc-lpc32xx: Introduce RTC driver for the LPC32XX SoC
Wolfram Sang
w.sang at pengutronix.de
Tue Aug 10 06:25:07 EDT 2010
Hi Kevin,
driver seems to work fine here, a few comments though.
On Mon, Aug 09, 2010 at 09:17:29AM -0700, wellsk40 at gmail.com wrote:
> From: Kevin Wells <wellsk40 at gmail.com>
>
> This patch contains the RTC driver for the built-in RTC in
> the LPC32XX SoC.
>
> Signed-off-by: Kevin Wells <wellsk40 at gmail.com>
> Signed-off-by: Durgesh Pattamatta <durgesh.pattamatta at nxp.com>
> ---
> drivers/rtc/rtc-lpc32xx.c | 391 +++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 391 insertions(+), 0 deletions(-)
> create mode 100644 drivers/rtc/rtc-lpc32xx.c
>
> diff --git a/drivers/rtc/rtc-lpc32xx.c b/drivers/rtc/rtc-lpc32xx.c
> new file mode 100644
> index 0000000..7803c68
> --- /dev/null
> +++ b/drivers/rtc/rtc-lpc32xx.c
> @@ -0,0 +1,391 @@
> +/*
> + * Copyright (C) 2010 NXP Semiconductors
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, write to the Free Software Foundation, Inc.,
> + * 675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +#include <linux/rtc.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +
> +/*
> + * Clock and Power control register offsets
> + */
> +#define RTC_UCOUNT 0x00
> +#define RTC_DCOUNT 0x04
> +#define RTC_MATCH0 0x08
> +#define RTC_MATCH1 0x0C
> +#define RTC_CTRL 0x10
> +#define RTC_INTSTAT 0x14
> +#define RTC_KEY 0x18
> +#define RTC_SRAM 0x80
> +
> +#define RTC_MATCH0_EN (1 << 0)
> +#define RTC_MATCH1_EN (1 << 1)
> +#define RTC_ONSW_MATCH0_EN (1 << 2)
> +#define RTC_ONSW_MATCH1_EN (1 << 3)
> +#define RTC_SW_RESET (1 << 4)
> +#define RTC_CNTR_DIS (1 << 6)
> +#define RTC_ONSW_FORCE_HIGH (1 << 7)
> +
> +#define RTC_MATCH0_INT_STS (1 << 0)
> +#define RTC_MATCH1_INT_STS (1 << 1)
> +#define RTC_ONSW_INT_STS (1 << 2)
> +
> +#define RTC_KEY_ONSW_LOADVAL 0xB5C13F27
> +
> +#define RTC_NAME "rtc-lpc32xx"
> +
> +#define rtc_readl(dev, reg) \
> + __raw_readl((dev)->rtc_base + reg)
> +#define rtc_writel(dev, reg, val) \
> + __raw_writel((val), (dev)->rtc_base + reg)
> +
> +struct lpc32xx_rtc {
> + void __iomem *rtc_base;
> + unsigned int irq;
> + int alarm_enabled;
> + struct rtc_device *rtc;
> + spinlock_t lock;
> +};
> +
> +static int lpc32xx_rtc_read_time(struct device *dev, struct rtc_time *time)
> +{
> + unsigned long elapsed_sec;
> + struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
> +
> + elapsed_sec = rtc_readl(rtc, RTC_UCOUNT);
> + rtc_time_to_tm(elapsed_sec, time);
> +
> + return rtc_valid_tm(time);
> +}
> +
> +static int lpc32xx_rtc_set_mmss(struct device *dev, unsigned long secs)
> +{
> + struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
> + u32 tmp;
> +
> + spin_lock_irq(&rtc->lock);
> +
> + /* RTC must be disabled during count update */
> + tmp = rtc_readl(rtc, RTC_CTRL);
> + rtc_writel(rtc, RTC_CTRL, tmp | RTC_CNTR_DIS);
> + rtc_writel(rtc, RTC_UCOUNT, secs);
> + rtc_writel(rtc, RTC_DCOUNT, 0xFFFFFFFF - secs);
> + rtc_writel(rtc, RTC_CTRL, tmp &= ~RTC_CNTR_DIS);
> +
> + spin_unlock_irq(&rtc->lock);
> +
> + return 0;
> +}
> +
> +static int lpc32xx_rtc_read_alarm(struct device *dev,
> + struct rtc_wkalrm *wkalrm)
> +{
> + struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
> +
> + rtc_time_to_tm(rtc_readl(rtc, RTC_MATCH0), &wkalrm->time);
> + wkalrm->enabled = rtc->alarm_enabled;
> +
> + return rtc_valid_tm(&wkalrm->time);
> +}
> +
> +static int lpc32xx_rtc_set_alarm(struct device *dev,
> + struct rtc_wkalrm *wkalrm)
> +{
> + struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
> + unsigned long alarmsecs;
> + u32 tmp;
> + int ret;
Empty line to seperate variables from the code
> + ret = rtc_tm_to_time(&wkalrm->time, &alarmsecs);
> + if (ret < 0) {
> + dev_err(dev, "Failed to convert time: %d\n", ret);
> + return ret;
> + }
> +
> + spin_lock_irq(&rtc->lock);
> +
> + /* Disable alarm during update */
> + tmp = rtc_readl(rtc, RTC_CTRL);
> + rtc_writel(rtc, RTC_CTRL, tmp & ~RTC_MATCH0_EN);
> +
> + rtc->alarm_enabled = wkalrm->enabled = 1;
> + if (wkalrm->enabled) {
> + rtc_writel(rtc, RTC_MATCH0, alarmsecs);
> + rtc_writel(rtc, RTC_INTSTAT, RTC_MATCH0_INT_STS);
> + rtc_writel(rtc, RTC_CTRL, tmp | RTC_MATCH0_EN);
> + }
> +
> + spin_unlock_irq(&rtc->lock);
> +
> + return 0;
> +}
> +
> +static int lpc32xx_rtc_alarm_irq_enable(struct device *dev,
> + unsigned int enabled)
> +{
> + struct lpc32xx_rtc *rtc = dev_get_drvdata(dev);
> + u32 tmp;
> +
> + spin_lock_irq(&rtc->lock);
> + rtc->alarm_enabled = (int) enabled;
> + tmp = rtc_readl(rtc, RTC_CTRL);
> +
> + if (enabled)
> + tmp |= RTC_MATCH0_EN;
> + else
> + tmp &= ~RTC_MATCH0_EN;
> +
> + rtc_writel(rtc, RTC_CTRL, tmp);
> + spin_unlock_irq(&rtc->lock);
> +
> + return 0;
> +}
> +
> +static irqreturn_t lpc32xx_rtc_alarm_interrupt(int irq, void *dev)
> +{
> + struct lpc32xx_rtc *rtc = (struct lpc32xx_rtc *) dev;
You can drop this cast.
> +
> + spin_lock(&rtc->lock);
> +
> + /* Disable alarm interrupt */
> + rtc_writel(rtc, RTC_CTRL,
> + rtc_readl(rtc, RTC_CTRL) & ~RTC_MATCH0_EN);
> + rtc->alarm_enabled = 0;
> +
> + /*
> + * Write a large value to the match value so the RTC won't
> + * keep firing the match status
> + */
> + rtc_writel(rtc, RTC_MATCH0, 0xFFFFFFFF);
> + rtc_writel(rtc, RTC_INTSTAT, RTC_MATCH0_INT_STS);
> +
> + spin_unlock(&rtc->lock);
> +
> + rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static const struct rtc_class_ops lpc32xx_rtc_ops = {
> + .read_time = lpc32xx_rtc_read_time,
> + .set_mmss = lpc32xx_rtc_set_mmss,
> + .read_alarm = lpc32xx_rtc_read_alarm,
> + .set_alarm = lpc32xx_rtc_set_alarm,
> + .alarm_irq_enable = lpc32xx_rtc_alarm_irq_enable,
> +};
> +
> +static int __devinit lpc32xx_rtc_probe(struct platform_device *pdev)
> +{
> + struct resource *res, *mem = NULL;
> + struct lpc32xx_rtc *rtc = NULL;
> + int rtcirq, retval;
> + u32 tmp;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "Can't get memory resource\n");
> + return -ENOENT;
> + }
> +
> + rtcirq = platform_get_irq(pdev, 0);
> + if ((rtcirq < 0) || (rtcirq >= NR_IRQS)) {
> + dev_err(&pdev->dev, "Can't get interrupt resource\n");
> + return -ENOENT;
> + }
> +
> + rtc = kzalloc(sizeof(struct lpc32xx_rtc), GFP_KERNEL);
> + if (unlikely(!rtc)) {
> + dev_err(&pdev->dev, "Can't allocate memory\n");
> + return -ENOMEM;
> + }
> + rtc->irq = rtcirq;
> +
> + mem = request_mem_region(res->start, resource_size(res), pdev->name);
> + if (!mem) {
> + dev_err(&pdev->dev, "RTC registers are not free\n");
> + retval = -EBUSY;
> + goto err_reqmem;
> + }
> +
> + rtc->rtc_base = ioremap(res->start, res->end - res->start + 1);
How about using managed resources (devm_*)? They usually simplify the
error paths and make the probe more readable.
> + if (!rtc->rtc_base) {
> + dev_err(&pdev->dev, "Can't map memory\n");
> + retval = -EIO;
> + goto err_noremap;
> + }
> +
> + spin_lock_init(&rtc->lock);
> +
> + /*
> + * The RTC is on a seperate power domain and can keep it's state
> + * across a chip power cycle. If the RTC has never been previously
> + * setup, then set it up now for the first time.
> + */
> + if (rtc_readl(rtc, RTC_KEY) == RTC_KEY_ONSW_LOADVAL) {
> + tmp = rtc_readl(rtc, RTC_CTRL);
> + tmp &= ~(RTC_SW_RESET | RTC_CNTR_DIS | RTC_MATCH0_EN |
> + RTC_MATCH1_EN | RTC_ONSW_MATCH0_EN |
> + RTC_ONSW_MATCH1_EN | RTC_ONSW_FORCE_HIGH);
> + rtc_writel(rtc, RTC_CTRL, tmp);
> +
> + /* Clear latched interrupt states */
> + rtc_writel(rtc, RTC_MATCH0, 0xFFFFFFFF);
> + rtc_writel(rtc, RTC_INTSTAT, RTC_MATCH0_INT_STS |
> + RTC_MATCH1_INT_STS | RTC_ONSW_INT_STS);
> +
> + /* Write key value to RTC so it won't reload on reset */
> + rtc_writel(rtc, RTC_KEY, RTC_KEY_ONSW_LOADVAL);
> + } else if (rtc_readl(rtc, RTC_CTRL) & RTC_MATCH0_EN)
> + rtc->alarm_enabled = 1;
> +
> + platform_set_drvdata(pdev, rtc);
> +
> + device_init_wakeup(&pdev->dev, 1);
> + rtc->rtc = rtc_device_register(RTC_NAME, &pdev->dev, &lpc32xx_rtc_ops,
> + THIS_MODULE);
> + if (IS_ERR(rtc->rtc)) {
> + dev_err(&pdev->dev, "Can't get RTC\n");
> + retval = PTR_ERR(rtc->rtc);
> + goto err_noreg;
> + }
> +
> + retval = request_irq(rtc->irq, lpc32xx_rtc_alarm_interrupt,
> + IRQF_DISABLED, "rtcalarm", rtc);
> + if (retval < 0) {
> + dev_err(&pdev->dev, "Can't request interrupt\n");
> + goto err_free_irq;
> + }
I saw that a number of rtc-drivers register their irq after they
register the device. I wonder if this is OK here? Couldn't it happen
that after rtc_device_register() there is a preemption and another
process could set the alarm? Then there is a race between interrupts
already enabled and no handler available, no?
> +
> + return 0;
> +
> +err_free_irq:
> + rtc_device_unregister(rtc->rtc);
> +err_noreg:
> + iounmap(rtc->rtc_base);
> +err_noremap:
> + release_resource(mem);
> +err_reqmem:
> + kfree(rtc);
> +
> + return retval;
> +}
> +
> +static int __devexit lpc32xx_rtc_remove(struct platform_device *pdev)
> +{
> + struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> + free_irq(rtc->irq, pdev);
> + rtc_device_unregister(rtc->rtc);
> + iounmap(rtc->rtc_base);
> + release_resource(dev_get_drvdata(&rtc->rtc->dev));
> + kfree(rtc);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +static int lpc32xx_rtc_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(&pdev->dev))
> + enable_irq_wake(rtc->irq);
> + else
> + disable_irq_wake(rtc->irq);
> +
> + return 0;
> +}
> +
> +static int lpc32xx_rtc_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> + if (device_may_wakeup(&pdev->dev))
> + disable_irq_wake(rtc->irq);
> +
> + return 0;
> +}
> +
> +/* Unconditionally disable the alarm */
> +static int lpc32xx_rtc_freeze(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> + spin_lock_irq(&rtc->lock);
> +
> + rtc_writel(rtc, RTC_CTRL,
> + rtc_readl(rtc, RTC_CTRL) & ~RTC_MATCH0_EN);
> +
> + spin_unlock_irq(&rtc->lock);
> +
> + return 0;
> +}
> +
> +static int lpc32xx_rtc_thaw(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct lpc32xx_rtc *rtc = platform_get_drvdata(pdev);
> +
> + if (rtc->alarm_enabled)
> + rtc_writel(rtc, RTC_CTRL,
> + rtc_readl(rtc, RTC_CTRL) | RTC_MATCH0_EN);
> +
> + return 0;
> +}
> +
> +#else
> +#define lpc32xx_rtc_suspend NULL
> +#define lpc32xx_rtc_resume NULL
> +#define lpc32xx_rtc_freeze NULL
> +#define lpc32xx_rtc_thaw NULL
> +#endif
> +
> +static const struct dev_pm_ops lpc32xx_rtc_pm_ops = {
> + .suspend = lpc32xx_rtc_suspend,
> + .resume = lpc32xx_rtc_resume,
> + .freeze = lpc32xx_rtc_freeze,
> + .thaw = lpc32xx_rtc_thaw,
> + .restore = lpc32xx_rtc_resume
> +};
> +
> +static struct platform_driver lpc32xx_rtc_driver = {
> + .probe = lpc32xx_rtc_probe,
> + .remove = __devexit_p(lpc32xx_rtc_remove),
> + .driver = {
> + .name = RTC_NAME,
> + .pm = &lpc32xx_rtc_pm_ops,
> + },
> +};
> +
> +static int __init lpc32xx_rtc_init(void)
> +{
> + return platform_driver_register(&lpc32xx_rtc_driver);
> +}
> +
> +static void __exit lpc32xx_rtc_exit(void)
> +{
> + platform_driver_unregister(&lpc32xx_rtc_driver);
> +}
> +
> +module_init(lpc32xx_rtc_init);
> +module_exit(lpc32xx_rtc_exit);
Minor nitpick: The trend seems to be to put those lines directly after
the function.
> +
> +MODULE_AUTHOR("Kevin Wells <wellsk40 at gmail.com");
> +MODULE_DESCRIPTION("RTC driver for the LPC32xx SoC");
> +MODULE_LICENSE("GPL");
> --
> 1.7.1.1
>
> --
> You received this message because you are subscribed to "rtc-linux".
> Membership options at http://groups.google.com/group/rtc-linux .
> Please read http://groups.google.com/group/rtc-linux/web/checklist
> before submitting a driver.
Regards,
Wolfram
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100810/842103ed/attachment.sig>
More information about the linux-arm-kernel
mailing list