[PATCH 1/3] ARM: S5PC210: Use the correct GPIO base addresses

[Kyungmin Park]

On Fri, Aug 6, 2010 at 10:41 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Kyungmin Park wrote:
>>
>> From: Kyungmin Park <kyungmin.park at samsung.com>
>>
>> The S5PC210 has three GPIO base addresses.
>>
>> Part1 Base Address=0x11400000
>> Part2 Base Address=0x11000000
>> Part3 Base Address=0x03860000
>>
> Yes, maybe missed.
>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>>  arch/arm/mach-s5pv310/include/mach/map.h |    4 +++-
>>  1 files changed, 3 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-
>> s5pv310/include/mach/map.h
>> index 87697c9..7eb2a7a 100644
>> --- a/arch/arm/mach-s5pv310/include/mach/map.h
>> +++ b/arch/arm/mach-s5pv310/include/mach/map.h
>> @@ -39,8 +39,10 @@
>>  #define S5PV310_PA_GIC_DIST          (0x10501000)
>>  #define S5PV310_PA_L2CC                      (0x10502000)
>>
>> -#define S5PV310_PA_GPIO                      (0x11000000)
>> +#define S5PV310_PA_GPIO                      (0x11400000)
>
> S5PV310_PA_GPIO1 is better...

No problem.
>
>>  #define S5P_PA_GPIO                  S5PV310_PA_GPIO
>
>> +#define S5PV310_PA_GPIO2             (0x11000000)
>> +#define S5PV310_PA_GPIO3             (0x03860000)
>
>>
>>  #define S5PV310_PA_UART                      (0x13800000)
>>
>> --
>
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>