[PATCH 3/3] ARM: S5PC210: GPIO library support
Kyungmin Park
kmpark at infradead.org
Fri Aug 6 22:26:38 EDT 2010
On Fri, Aug 6, 2010 at 10:38 PM, Kukjin Kim <kgene.kim at samsung.com> wrote:
> Kyungmin Park wrote:
>>
>> From: Kyungmin Park <kyungmin.park at samsung.com>
>>
>> S5PC210 has three GPIOs. Part 1 uses the same as previous framework.
>> Part2 & Part 3 uses the own ioremap address.
>
> I don't think so, GPIO2 and GPIO3 parts should use same framework not
> ioremap.
> As my team member replied to you, can support 3 GPIO parts with same way....
I heard that define the iodesc for GPIO{2,3} at s5pc210 iodesc and then use it.
Before reply it. please first read the previous patch "Remove VA_GPIO
dependency of GPIO ..."
then you can find a reason why I use the ioremap.
My idea is simple. pass the virtual address the common gpio and
external irq framework.
and don't use the VA_GPIO at codes.
actually external irq is the special gpio.
Thank you,
Kyungmin Park
>
> And same method can help to handle this more easily.
>
>>
>> Known issues: external interrupt codes depend on VA_GPIO which is used at
> Part
>> 1
>> . But actual external interrupt GPIOs are located at Part 2 of GPIO.
>> It needs to fixed by passsing the base address to irq-ext routine.
>>
>> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
>> ---
>> arch/arm/mach-s5pv310/Makefile | 2 +-
>> arch/arm/mach-s5pv310/gpiolib.c | 360
>> +++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 361 insertions(+), 1 deletions(-)
>> create mode 100644 arch/arm/mach-s5pv310/gpiolib.c
>>
>> diff --git a/arch/arm/mach-s5pv310/Makefile
> b/arch/arm/mach-s5pv310/Makefile
>> index 82dbbaa..de49e98 100644
>> --- a/arch/arm/mach-s5pv310/Makefile
>> +++ b/arch/arm/mach-s5pv310/Makefile
>> @@ -12,7 +12,7 @@ obj- :=
>>
>> # Core support for S5PV310 system
>>
>> -obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
>> +obj-$(CONFIG_CPU_S5PV310) += cpu.o init.o clock.o irq-combiner.o
> gpiolib.o
>> obj-$(CONFIG_CPU_S5PV310) += setup-i2c0.o time.o
>>
>> obj-$(CONFIG_SMP) += platsmp.o headsmp.o
>> diff --git a/arch/arm/mach-s5pv310/gpiolib.c
> b/arch/arm/mach-s5pv310/gpiolib.c
>> new file mode 100644
>> index 0000000..c19fcf3
>> --- /dev/null
>> +++ b/arch/arm/mach-s5pv310/gpiolib.c
>> @@ -0,0 +1,360 @@
>> +/*
>> + * linux/arch/arm/mach-s5pv310/gpiolib.c
>> + *
>> + * Copyright (C) 2010 Samsung Electronics Co., Ltd.
>> + *
>> + * S5PC210 - GPIOlib support
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/irq.h>
>> +#include <linux/io.h>
>> +#include <linux/gpio.h>
>> +#include <plat/gpio-core.h>
>> +#include <plat/gpio-cfg.h>
>> +#include <plat/gpio-cfg-helpers.h>
>> +#include <mach/map.h>
>> +
>> +static struct s3c_gpio_cfg gpio_cfg = {
>> + .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
>> + .set_pull = s3c_gpio_setpull_updown,
>> + .get_pull = s3c_gpio_getpull_updown,
>> +};
>> +
>> +static struct s3c_gpio_cfg gpio_cfg_noint = {
>> + .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
>> + .set_pull = s3c_gpio_setpull_updown,
>> + .get_pull = s3c_gpio_getpull_updown,
>> +};
>> +
>> +static struct s3c_gpio_cfg gpio_cfg_extint = {
>> + .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
>> + .set_pull = s3c_gpio_setpull_updown,
>> + .get_pull = s3c_gpio_getpull_updown,
>> +};
>> +
>> +/*
>> + * GPIO bank's base address given the index of the bank in the
>> + * list of all gpio banks.
>> + */
>> +#define S5PC210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20))
>> +#define S5PC210_BANK2_BASE(base, bank) ((base) + ((bank) * 0x20))
>> +
>> +#define EXTINT_OFFSET (0xC00)
>> +
>> +/*
>> + * Following are the gpio banks in c210.
>> + *
>> + * The 'config' member when left to NULL, is initialized to the default
>> + * structure gpio_cfg in the init function below.
>> + *
>> + * The 'base' member is also initialized in the init function below.
>> + * Note: The initialization of 'base' member of s3c_gpio_chip structure
>> + * uses the above macro and depends on the banks being listed in order
> here.
>> + */
>> +
>> +static struct s3c_gpio_chip s5pc210_gpio_part1_4bit[] = {
>> + {
>> + .chip = {
>> + .base = S5PV310_GPA0(0),
>> + .ngpio = S5PV310_GPIO_A0_NR,
>> + .label = "GPA0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPA1(0),
>> + .ngpio = S5PV310_GPIO_A1_NR,
>> + .label = "GPA1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPB(0),
>> + .ngpio = S5PV310_GPIO_B_NR,
>> + .label = "GPB",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPC0(0),
>> + .ngpio = S5PV310_GPIO_C0_NR,
>> + .label = "GPC0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPC1(0),
>> + .ngpio = S5PV310_GPIO_C1_NR,
>> + .label = "GPC1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPD0(0),
>> + .ngpio = S5PV310_GPIO_D0_NR,
>> + .label = "GPD0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPD1(0),
>> + .ngpio = S5PV310_GPIO_D1_NR,
>> + .label = "GPD1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPE0(0),
>> + .ngpio = S5PV310_GPIO_E0_NR,
>> + .label = "GPE0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPE1(0),
>> + .ngpio = S5PV310_GPIO_E1_NR,
>> + .label = "GPE1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPE2(0),
>> + .ngpio = S5PV310_GPIO_E2_NR,
>> + .label = "GPE2",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPE3(0),
>> + .ngpio = S5PV310_GPIO_E3_NR,
>> + .label = "GPE3",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPE4(0),
>> + .ngpio = S5PV310_GPIO_E4_NR,
>> + .label = "GPE4",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPF0(0),
>> + .ngpio = S5PV310_GPIO_F0_NR,
>> + .label = "GPF0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPF1(0),
>> + .ngpio = S5PV310_GPIO_F1_NR,
>> + .label = "GPF1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPF2(0),
>> + .ngpio = S5PV310_GPIO_F2_NR,
>> + .label = "GPF2",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPF3(0),
>> + .ngpio = S5PV310_GPIO_F3_NR,
>> + .label = "GPF3",
>> + },
>> + },
>> +};
>> +
>> +static struct s3c_gpio_chip s5pc210_gpio_part2_4bit[] = {
>> + {
>> + .chip = {
>> + .base = S5PV310_GPJ0(0),
>> + .ngpio = S5PV310_GPIO_J0_NR,
>> + .label = "GPJ0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPJ1(0),
>> + .ngpio = S5PV310_GPIO_J1_NR,
>> + .label = "GPJ1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPK0(0),
>> + .ngpio = S5PV310_GPIO_K0_NR,
>> + .label = "GPK0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPK1(0),
>> + .ngpio = S5PV310_GPIO_K1_NR,
>> + .label = "GPK1",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPK2(0),
>> + .ngpio = S5PV310_GPIO_K2_NR,
>> + .label = "GPK2",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPK3(0),
>> + .ngpio = S5PV310_GPIO_K3_NR,
>> + .label = "GPK3",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPL0(0),
>> + .ngpio = S5PV310_GPIO_L0_NR,
>> + .label = "GPL0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPL1(0),
>> + .ngpio = S5PV310_GPIO_L0_NR,
>> + .label = "GPL0",
>> + },
>> + }, {
>> + .chip = {
>> + .base = S5PV310_GPL2(0),
>> + .ngpio = S5PV310_GPIO_L2_NR,
>> + .label = "GPL2",
>> + },
>> + }, {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_MP00(0),
>> + .ngpio = S5PV310_GPIO_MP00_NR,
>> + .label = "MP00",
>> + },
>> + }, {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_MP01(0),
>> + .ngpio = S5PV310_GPIO_MP01_NR,
>> + .label = "MP01",
>> + },
>> + }, {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_MP02(0),
>> + .ngpio = S5PV310_GPIO_MP02_NR,
>> + .label = "MP02",
>> + },
>> + }, {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_MP03(0),
>> + .ngpio = S5PV310_GPIO_MP03_NR,
>> + .label = "MP03",
>> + },
>> + }, {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_MP04(0),
>> + .ngpio = S5PV310_GPIO_MP04_NR,
>> + .label = "MP04",
>> + },
>> + }, {
>> + .config = &gpio_cfg_extint,
>> + .chip = {
>> + .base = S5PV310_GPX0(0),
>> + .ngpio = S5PV310_GPIO_X0_NR,
>> + .label = "GPX0",
>> + },
>> + }, {
>> + .config = &gpio_cfg_extint,
>> + .chip = {
>> + .base = S5PV310_GPX1(0),
>> + .ngpio = S5PV310_GPIO_X1_NR,
>> + .label = "GPX1",
>> + },
>> + }, {
>> + .config = &gpio_cfg_extint,
>> + .chip = {
>> + .base = S5PV310_GPX2(0),
>> + .ngpio = S5PV310_GPIO_X2_NR,
>> + .label = "GPX2",
>> + },
>> + }, {
>> + .config = &gpio_cfg_extint,
>> + .chip = {
>> + .base = S5PV310_GPX3(0),
>> + .ngpio = S5PV310_GPIO_X3_NR,
>> + .label = "GPX3",
>> + },
>> + },
>> +};
>> +
>> +static struct s3c_gpio_chip s5pc210_gpio_part3_4bit[] = {
>> + {
>> + .config = &gpio_cfg_noint,
>> + .chip = {
>> + .base = S5PV310_GPZ(0),
>> + .ngpio = S5PV310_GPIO_Z_NR,
>> + .label = "GPZ",
>> + },
>> + },
>> +};
>> +
>> +static __init int s5pc210_gpiolib_init(void)
>> +{
>> + struct s3c_gpio_chip *chip;
>> + int nr_chips;
>> + int i, extint = 0;
>> + void __iomem *base;
>> +
>> + /* Part 1 */
>> + chip = s5pc210_gpio_part1_4bit;
>> + nr_chips = ARRAY_SIZE(s5pc210_gpio_part1_4bit);
>> +
>> + for (i = 0; i < nr_chips; i++, chip++) {
>> + if (chip->config == NULL)
>> + chip->config = &gpio_cfg;
>> +
>> + if (chip->config == &gpio_cfg_extint)
>> + chip->base = S5PC210_BANK_BASE(extint) +
>> EXTINT_OFFSET;
>> +
>> + if (chip->base == NULL)
>> + chip->base = S5PC210_BANK_BASE(i);
>> + }
>> +
>> + samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part1_4bit, nr_chips);
>> +
>> + /* It's permanent mapping. no iounmap */
>> + base = ioremap(S5PV310_PA_GPIO2, SZ_4K);
>> + if (!base)
>> + panic("Can't ioremapthe GPIO Part 2 address\n");
>> +
>> + /* Part 2 */
>> + chip = s5pc210_gpio_part2_4bit;
>> + nr_chips = ARRAY_SIZE(s5pc210_gpio_part2_4bit);
>> +
>> + for (i = 0; i < nr_chips; i++, chip++) {
>> + if (chip->config == NULL)
>> + chip->config = &gpio_cfg;
>> +
>> + if (chip->config == &gpio_cfg_extint)
>> + chip->base = S5PC210_BANK2_BASE(base, extint) +
>> EXTINT_OFFSET;
>> +
>> + if (chip->base == NULL)
>> + chip->base = S5PC210_BANK2_BASE(base, i);
>> + }
>> +
>> + samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part2_4bit, nr_chips);
>> +
>> + /* It's permanent mapping. no iounmap */
>> + base = ioremap(S5PV310_PA_GPIO3, SZ_4K);
>> + if (!base)
>> + panic("Can't ioremapthe GPIO Part 3 address\n");
>> +
>> + /* Part 3 */
>> + chip = s5pc210_gpio_part3_4bit;
>> + nr_chips = ARRAY_SIZE(s5pc210_gpio_part3_4bit);
>> +
>> + for (i = 0; i < nr_chips; i++, chip++) {
>> + if (chip->config == NULL)
>> + chip->config = &gpio_cfg;
>> +
>> + if (chip->base == NULL)
>> + chip->base = S5PC210_BANK2_BASE(base, i);
>> + }
>> +
>> + samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part3_4bit, nr_chips);
>> +
>> + return 0;
>> +}
>> +
>> +core_initcall(s5pc210_gpiolib_init);
>> --
>
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
>
More information about the linux-arm-kernel
mailing list